How to seal the counter on water? Can I change the meter for water and seal it myself?

In each city apartment a water meter must be installed. It is important not only to install such a device, but also to register it in the relevant service. In order for the meter to be put into operation, a special conclusion is required, where it is stated that the water meter was installed correctly, as well as an act that describes the result of testing the device for leaks and for the presence of a seal. The last document is very important. The specialist of the relevant company must install a seal on the counter. This limits access to the parts of the instrument and does not allow changing the reading. In addition, the seal is the basis for the recalculation of the volume of water supply. Can I install it myself? How to seal the counter on water?

Why you need to install a seal

Before answering the question of how to seal a meter on water, it is necessary to understand why it is necessary at all. According to the law, you can use meters only those whose accuracy has been officially confirmed. To do this, the counters are sealed. Its integrity confirms:

1. No unauthorized access.
2. The accuracy of the readings of the device, since no one tried to direct the water around the counter.

When do I need to seal the device?

In what situations is it necessary to seal the counters on water? Chelyabinsk, Moscow and other cities of the country can not do without special services that produce sealing of meters. A similar procedure may be required when installing a new device. Of course, many ask the question of how to seal the counter on water independently. Is it worth it? Specialists do not recommend conducting such a procedure on their own. After all, for registration of a new device it is necessary to submit documents from an organization that has the right to conduct such work. So, re-sealing the water meter is required if:

1. The device has reached the end of its life.
2. The meter prematurely failed.
3. The elements of the system, for example a valve or a pipe, have been replaced.
4. The ball valve is out of order.
5. The counter was damaged.
6. An accident occurred in the water supply system.
7. The apartment was purchased in the secondary housing market.

It is necessary to seal the counter in almost any situation, when it is damaged as a result of a mechanical action or has been replaced.

Who should seal the meters for water?

In order to recalculate payment for water, it is required not only to install the meter, but also to seal it, and then register it. If this is not done, the amount of charges will correspond to the tariff. Since it is impossible to seal the counters on water independently, it is necessary to invite a specialist from the organization who has permission to carry out such work. Otherwise, you will not be able to register the water meter. The most important thing is for the company to issue an act of sealing.

Before starting work, a specialist should check whether the meter is installed correctly, and also if it is intact. After sealing, the employee must give the owner of the apartment a package of documents that is required to register the water meter.

The company should be chosen with special attention. Only the organization that has the appropriate license can seal the water meters. Most often, these companies work together with the Criminal Code, housing department, housing association and so on. After all, according to the Federal Law "On Water Supply and Sanitation" dated 07.12.2011 No. 416-FZ, sealing of counters should be carried out free of charge by an organization that deals with water supply of apartments.

However, in some cases, a fee is required. This applies to cases where the replacement of the damaged seal with a new one was carried out.

Which company to choose?

Since only the specialist can seal the meter on water, it is worthwhile to carefully approach the choice of the company. How to choose the right master? When choosing, pay attention to the availability of such documents as:

1. A license to carry out works of this kind. This guarantees the professionalism of the employee.
2. Warranty and service maintenance, replacement and repair of metering devices in case of their failure.

In addition, the company's specialist must provide the owner of the apartment with a package of necessary documents: an installation certificate, a contract for the installation of a water meter. It should be taken into account that the responsibility for the correct installation of the meters is borne by the company that conducted the similar work. In this case, all work should be carried out in accordance with all the requirements of the supervisory authority.

Sealing of the meter when first installed or replaced

Many people are interested in the question of how to change the meter for water and seal it? If the meter was only installed, the owner of the apartment must call the employee of the management company. The specialist of this organization must confirm that the installation of the water meter was made without any violations. At the same time, an act of putting the metering device into operation should be drawn up. After that, the counter is sealed.

It should be taken into account that in some cities such work is only allowed by communal service employees. In such situations, the water meter will be sealed by two employees: a representative of the municipal service and the Criminal Code. Precisely the same actions occur when the water meter is replaced.

Terms of procedure

How much will it cost to seal water meters in Orenburg, Chelyabinsk and other cities? It all depends on who can do such a job. The term of sealing the meter is usually indicated in the technical passport of the meter. Most often this indicator depends on the water meter model. It should be noted that for sealing those devices that were released long ago, it is given less time than for new devices. Usually representatives of the organization come within 5 days. At the same time, the owner should not only have a passport, but also an installation certificate.

In this case, the specialist is only interested in whether the device was installed correctly, and whether its integrity is not violated. After the inspection, the worker must draw up an act of commissioning the water meter, and then seal the unit. The owner of the apartment must carefully study the contract. Often, it indicates a sufficiently high subscription fee, payment for verification, as well as insurance. After signing all the papers, the calculation of all expenses on the counter begins.

The contract must be executed in several copies. One of them remains with the owner of the apartment. The technical passport of the water meter should also remain with the owner of the living space. An employee of an organization can only copy it. Copies of documents can be made in advance.

Sealing cost

Call to seal water meters can a master from the local service or ask for help from private organizations. According to the legislation, this procedure should be carried out free of charge with the primary installation of the water meter, after repair or inspection. The charge is collected only in cases where the water meter was damaged and out of order due to the fault of the user.

At the same time, each company has its own prices for such services. As a rule, the price is from 500 to 2000 rubles. It is worth noting that there is a practice of appealing such payments through the court. Many seek to recover their money spent on sealing the meter. To do this, you need to apply to the court at the place of residence. Complain about how companies serve, you can and in Rospotrebnadzor.

How do I register a counter?

When buying a counter for water accounting, special attention should be paid not only to its equipment, but also to the availability of a technical passport. This document should not be a photocopy, but a printed publication. In the technical passport, as a rule, the serial number of the device is indicated, which should coincide with that indicated on the water meter itself.

After installing the counter, you need to register it. This requires:

1. Submit an application to the appropriate service.
2. Specify contact details, as well as the full name of the apartment owner.
3. Make a photocopy of the technical passport of the water meter.
4. Specify the desired time for sealing the water meter.

It should be noted that in cases where a representative of the company is unable to install the seal at the appointed time, he must contact the owner of the apartment and set a new date. In this case, all work must be carried out within 15 days after the application was submitted.

In conclusion

Now you know whether it is possible to seal the counter on water yourself. It is worth noting that you can mount the water meter yourself. However, after this, it is still necessary to invite a specialist of the relevant service to draw up an act and conclusions about the correctness of the installation of the water meter. It is not recommended to seal a hydrometer alone. This should be done by an employee of a company licensed to carry out such services.