HomelinessBuilding

Baths from a bar. The project of a bath 6х4 from a bar

Traditionally, Russian baths were built from logs, but at present preference is given to cheaper material - timber. It has all the qualities of natural wood, while the construction of the building will be made in a very short time and with minimal costs.

Main advantages of the bar

  • Relatively low weight of the material, so there is no need to erect a powerful foundation. Suitable tape or columnar.

  • It's easy and easy to build on your own - you can buy the already prepared draft of a 6x4 bath from a bar that does not require long shrinkage. The structure is erected as a designer directly on the site itself.

  • The roof can be made of metal, slate or ondulin. A pledge of strength and comfort can be rafters from a bar, the cross-section of which is 150 * 100 mm.

  • The construction of buildings has increased strength. Interior decoration can be done almost immediately after the main construction work is completed.

If the project of a bath from a bar of 6x4 (with its own hands realized) was chosen from a profiled beam, then in this case no caulking and exterior walling will be required. This building material has a rather attractive appearance and excellent grip of parts. Inside the structure, cold air will not penetrate, even if there is a very strong wind outside.

Over time, the middle of the beam is impregnated with resin, which makes it more durable and dense. Due to this, this building material acquires such high characteristics.

Design features of the bath

The standard equipment of the sauna includes:

  • The Tambur, which is combined with a waiting room. Sometimes they are separated by a door, but this significantly reduces space.

  • Steam room. It refers to the main bath room. It is in it that all health procedures are carried out.

  • Washing. There are simple benches, a shower cubicle or a self-made shower with a pallet.

The project of a bath 6х4 from a bar

The classical size for a Russian bath is 6 by 4 meters. This design is compact enough and it can be placed in any corner of the country site. The total area of the building is 24 meters square, and useful - about 20. But at the same time, this bath is quite spacious, it can perfectly fit for a large family or unexpected guests. The structure of the bar keeps the heat well and looks very aesthetically.

The design of the 6x4 bath from the bar allows you to equip a rather spacious rest room, where you can place a wardrobe, a table and several chairs. In a steam room, the size of which is 2 by 2 meters, you can build shelves along two walls at once, and in the wash room you can install a shower cabin for a bath. If desired, the size of one of the rooms can be reduced or increased.

The main advantages of the saunas are 4 to 6

The design of the 6x4 bath from the timber has a number of advantages:

  • All rooms are full-fledged rooms, where there is an opportunity to turn around to several people at the same time.

  • Due to the large space it is possible to install a real brick stove, which quickly warms up the room and creates a unique atmosphere.

  • If you want, you can arrange an additional area, erect an attic. This will transform a simple bath in a very cozy house for the reception of guests.

Before choosing the layout, it is very important to maintain the correct ratio of the size of rooms, ceiling height and other architectural elements.

Project: bathhouse with a bar 6x4 with a terrace

Variants of bathhouse planning can be completely different.

As an example, we can consider the following project. The bath of a bar of 6x4 with a terrace can be this: the foundation of the structure is a columnar foundation, which protects the bottom of the log from premature spoilage. Entrance to the bath - through the porch. Next is a spacious terrace, the area of which is 5.46 square meters. For winter use, the terrace can be glazed and equipped under the veranda. Then there is a vestibule with an area of 2x2, where you can place a clothes hanger and a shelf for shoes. Tambour goes to the rest room, the area of which is 6.83 sq. M. M. For water procedures there is a washing area of 3.46 square meters. M and a steam room at 3.43 square meters. M, which are connected to each other by the door unit. The entrance to the washing room is carried out directly through the rest room.

The following project of a bath 6х4 from a bar 150х150 can be such:

  • Equip a spacious steam room, designed to stay at the same time 4-5 people (in this case, the area of the steam room will be 5.2 meters square);

  • Make a fairly spacious washroom, the area of which is about 8 square meters;

  • Still there will be a little space (about 2.5 meters square for the arrangement of the waiting room, which allows to reduce the heat loss of the steam room).

Another version of bathhouse 6x4 is to make a small washing room and steam room (3.5 sq. M.) And equip an open terrace.

The layout of the bath can be changed before the construction of the building is done.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.unansea.com. Theme powered by WordPress.