"Vetonit 3000": technical characteristics, expense and features of work

"Vetonit 3000", the technical characteristics, the expenditure of which you should be aware of before purchasing, is an ideal mixture for floor leveling in premises for different purposes, whether public, office or residential.

general description

The above composition is used when repair is required and in new construction on cement-sand and concrete bases. With this mixture it is possible to obtain an excellent basis, after which any floor coverings can be laid. The material can be used in the role of the finishing layer for screeds, which were arranged with the introduction of a heating system. Suitable mixture for manual application, and it can be used both in dry and in wet rooms. The main condition is the possibility of carrying out exclusively internal works.

Main technical characteristics

"Vetonit 3000", technical characteristics, the expenditure of which is mentioned below, allows to obtain a perfectly flat floor, which is suitable for the arrangement of any, even the thinnest floor coverings. Masters note a small expense and profitability, as well as a small period of drying. On the surface you can move after 4 hours, and you can put the finishing coat in three days. The composition after mashing easily spreads, and also does not assume the master has professional skills. Such a coating is able to undergo increased abrasive and mechanical loads, here you can include furniture items equipped with wheels.

Key Features

"Vetonit 3000", the technical characteristics, the consumption of which is mentioned in the article, is gray, water resistant, and special cement is used as cementitious components. In the role of filler limestone appears, as for the fraction, it is less than 0.3 millimeters. One square meter will take 1.5 kilograms of the mixture. Using "Vetonit 3000", technical characteristics, the expenditure of which you can learn by reading the article, you should provide a layer thickness of 0 - 5 millimeters. Operating temperature varies from plus 10 to plus 25 degrees, this feature must be taken into account. The water consumption per kilogram will be a limit of 0.26 to 0.28 liters. Use after preparation, the formulation is recommended for 30 minutes.

Packing and storage

"Vetonit 3000", the technical characteristics, the composition of which was described above, is packed into three-layer paper bags, the middle layer of which is polyethylene. The capacity of one bag is 25 kilograms. There are 48 bags on the pallet, which makes 1200 kilograms. Store after the production date, the composition is recommended for 6 months, but not more. It is important to comply with the conditions that require the preservation of the factory packaging and dry room.

Substrate preparation

If you use "Vetonit 3000", technical characteristics, the strength of which is quite impressive, you should know how to properly prepare the floor surface. If it is necessary to work with a base, in which the top layer is rather weak, then it should be disposed of by grinding. It is important to clean the floor of greasy stains, glue residues and old paint. The mixture is applied only on level surfaces, where all holes, cracks and places where the material can flow are filled in advance. If the roughing base has unevennesses of more than 5 millimeters, then the fill should not be produced. The base is pre-cleaned using a construction vacuum cleaner and treated with a primer.

Nuances of training

"Vetonit 3000", technical characteristics, analogues of which are presented in the article, should be applied to a substrate that is not excessively porous or dry. Before starting to distribute the floor, it is necessary to primer the surface twice, which will save the solution. If the surface is treated with a dispersion composition, then "Vetonite 3000" will bond more qualitatively with the substrate. This technology eliminates the occurrence of bubbles.

Preparation of the solution

If you still can not decide which mixture for the flooring device to choose, then you can pay attention to analogs, among them quite often consumers choose manufacturers "Ceresite", Ivsil and "Horizon". The technology of using each of the mixtures is the same. Dry composition pours into a clean bucket, after it is filled with water. Stirring is recommended to be done with a construction mixer until it is possible to achieve a homogeneous mass. If the mixture is too thick, you can add some water. This will not damage the quality of the material and will achieve the desired effect.