HomelinessBuilding

Construction technology "Veloks": description, features and reviews

Only half a century ago the technology of building "Veloks" appeared and was patented. Already today it has found its wide distribution and has been recognized in 40 countries of the world. This is due to a variety of reasons, but above all compliance with the requirements of eco-development for energy efficiency and environmental sustainability. If you are also interested in this technology of construction, you should familiarize with it in more detail.

Description

The system of non-removable formwork is an energy-saving integrated and environmentally friendly technology, which is now widely used in capital construction. It allows you to quickly build warm inexpensive houses that have different purposes.

Building technology "Veloks" meets modern standards, has a high competitiveness and meets consumer requirements. Operational and technical characteristics correspond to the world quality standards. Fixed formwork is made of chip-cement slabs, and their properties determine the quality characteristics of the future building.

Plates are characterized by ecological harmlessness, and are made by pressing technology from wood mineralized chips, which is contained in the material in a volume of up to 95%. In the production process, cement, aluminum sulfate and liquid glass are used. Sulfate acts as a catalyst, whereas glass acts as an antiseptic, mineralizer and binder.

Construction technology "Veloks" provides for the use of slabs, the dimensions of which are equal to 2000x500 mm. The thickness can reach a limit of 25 to 75 mm. The intermediate values are 35 and 50 mm. For the production of slabs, non-commodity wood is used, which has a spruce balance with a low sugar content.

What else do you need to know

The production procedure corresponds to the requirements regulating deep processing of raw materials. This indicates that the wood is used completely. All of its properties for sound and heat insulation remain unchanged. The insulation is located outside, and the wall turns out to be warm and does not provide additional thermal insulation.

The wood is mineralized, so the plates do not burn, they remain moisture-proof, do not rot and retain their geometric dimensions. In the process of operation, they are not subjected to aging processes. Building technology "Veloks" provides for the use of a material whose structure provides good air exchange. The walls are breathable, this allows you to create a comfortable indoor microclimate.

Positive reviews

Consumers are increasingly choosing the described technology for the reason that it involves the use of slabs that consist of spruce chips. It is environmentally friendly for human health and the environment. In the opinion of consumers, non-removable shuttering is capable of providing high heat and sound insulation, as well as fire safety.

The elements of the formwork are mounted quite quickly and simply, and it is not necessary to use crane equipment for this. The construction of houses using the technology "Veloks" allows you to save on the construction of the foundation. Houses are energy efficient, they provide high heat savings, which reaches 40%.

Customer opinions

The stone core, according to consumers, is longevous. This indicates that the service life of houses exceeds 100 years. If you are interested in the technology of construction of "Veloks", you should read reviews about it. Of these, you can learn that the construction of this method allows you to build houses of any configuration. Architectural solutions can be completely different, as are the finishes.

Technology features

Velox - technology of modern construction. It involves the use of a pair of chip-cement slabs, which are installed with self-tapping screws or nails. The outer product has a glued insulation, while the internal one is devoid of a heat-insulating layer. Plates are installed on the finished foundation parallel to each other with metal ties, they provide reliable fixation and vertical stability.

Plates are located along the perimeter, can be installed in one or two rows. At the same time, it is possible to form the space used for pouring concrete. If required, then from the edging board you can make temporary supports to observe the correct geometry of the structure.

Reinforcement of walls is carried out in accordance with the project. Formwork after installation and fixing is poured with concrete, which is prepared on the construction site or brought from the nearest factory. If you are wondering how to build a house using Velox technology, you should know that the technique involves the installation of monolithic ceilings, for which wooden or inventory racks and beams are installed. They are laid on the formwork of the floor, which has the appearance of hollow boxes "Veloks." For this, the "Velox" plates can also be used.

Slab formwork is filled with mortar. To fill the hollow space, you can use lightweight concrete, its variety will depend on the project. In this case, the high bearing capacity of the walls will be guaranteed by the inner columns, which are filled with heavy concrete. To do this, you need to choose the brand of concrete and the class of reinforcement, following the technology of production of reinforcing and concrete work. However, most often for such technology heavy concrete is used.

The technology of building "Veloks" in the Crimea is used quite often. This technique provides for the laying of engineering communications in the formwork. In it channels are arranged. Water supply and wiring inside the apartment are laid in furrows, which are formed in the inner slab formwork.

The price of a house using the "Velox" technology

If you do not plan to work on your own, then you should be interested in the price of building a house using the "Velox" technology. The cost of one square meter will cost the consumer 27,772 rubles. In this case we are talking about the construction, whose dimensions are 10x10 m. This amount provides for all types of work, including:

  • Foundation construction;
  • Device roughing floors;
  • The device of a roof;
  • Erection of internal and external walls;
  • Installation of internal power supply;
  • Finishing of ceilings and walls;
  • External staining;
  • Windows with installation of slopes and window-sills;
  • Installation of doors with cashing;
  • The device of heating;
  • The device of internal sewerage and water supply systems;
  • External networks.

The final price of construction using the "Velox" technology will be equal to 2,285,330 rubles.

Additional features of houses on technology "Veloks"

If you still do not know if it is worth buying a house that is built on this technology, then you should familiarize yourself with its additional features. For example, such buildings combine the durability and strength of a stone with ecological comfort and warmth of wood. The house at first will smell of wood, and the service life, according to consumers, reaches 120 years.

The human factor in the construction process is minimized: in order to do poorly, it is necessary to try very hard. This allows developers to give guarantees to consumers. The qualitative characteristics of the plates used in the construction process determine the advantages of the technology. Plates are made exclusively from environmentally friendly raw materials, they retain all their best properties and are highly durable. They are easy to saw, nail and milled.

Cloths do not rot, they do not multiply fungus, they do not undergo aging processes. For the production of chips, coniferous species are selected, which are naturally evaporated in open areas. Organic properties are lost completely. The material as a result acquires the property of resistance to aggressive environment and biological influences, which guarantees the durability of the structure. If you compare these houses with buildings that are built on another technology, they have been standing for more than half a century and since then they did not require major repairs.

Why else should you choose the technology "Velox"

To date, there are many technologies for the construction of private houses, but "Veloks" is gaining popularity every year. It allows you to build houses simply and quickly. For one season you can design a building and build a private cottage or a holiday home.

This technique is extremely unified, it provides for the use of only a few types of nodes and structural elements. Therefore, the design and construction became so fast and simple. You will not run into the problem in vain for the time you spent. It will not be necessary to attract highly qualified specialists.

Conclusion

The technology of building houses "Veloks" allows you to shorten the period of work in half compared with traditional methods. Any house can be designed, and then assembled on the principle of a designer. Today, this approach to the construction of private houses is also called in the common people method "Lego" for adults.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.unansea.com. Theme powered by WordPress.