ComputersEquipment

TP-LINK TL-WR841ND - reviews. TP-LINK TL-WR841ND (Router): Specifications

Full information about the technical specifications of an entry-level network device from one of the leading manufacturers, strong and weak sides, user opinion and real feedback. TP-Link TL-WR841ND: It is this router that will be discussed in detail in this material. It is perfect for creating a small computer network with access to the Internet and an extended coverage area for a wireless Wi-Fi signal.

The strengths and weaknesses of this router

Two significant shortcomings of this router are the feedback. TP-Link TL-WR841ND does not have a USB port. Accordingly, it can not perform the functions of the file server (because of this, it can not connect an external storage device), the print server (for this reason it can not be attached to the printer and organize the output of documentation) or provide for the possibility of alternative data exchange with the global web It is not possible to install an external modem to connect to cellular networks). The second disadvantage is the lack of support for the most advanced standard of information transfer - 802.11ас, which allows data transfer at speeds over 1 Gb / s.

But if you take into account the positioning of the device and its cost, it becomes obvious that for this niche all the previously mentioned shortcomings are not so actual. These options are equipped with more expensive routers, aimed at creating large wireless networks with an even greater range. Also, a number of advantages for this network device give feedback. TP-Link TL-WR841ND boasts the following strengths:

  • High transmission speed, which in the 802.11n mode can reach 300 Mbps.

  • The presence of two removable antennas allows to significantly increase the range of the wireless network. According to the documentation, outside the room, it can cover a circle with a diameter of up to 150 meters.

  • Four RJ-45 ports allow using a twisted-pair cable to organize a wired part of a computer network.

  • The presence of a special button allows, if necessary, to deactivate the wired network segment.

  • A convenient and intuitive display system on the front panel.

Technical specifications

A very good technical specification is TP-Link TL-WR841ND. Characteristics of him in this regard are:

  • Operating frequency range: 2.4 ÷ 2.4835 GHz.

  • Support for encryption of the access code up to 152 bits.

  • The amplification of the wireless network signal is 2x5 dB.

  • 11 possible channels for creating a wireless network.

  • The transmission speed of information in the wireless segment is up to 300 Mbit / s.

  • The increased diameter of the coverage area of the WiFi signal, which in open areas can reach 150 meters.

  • The presence of the built-in firewall ensures the maximum degree of security of the internal computer network.

Equipment

The TP-Link TL-WR841ND is configured as follows:

  • Actually a router.

  • A set of advertising booklets.

  • 2 removable antennas.

  • Quick guide for quick setup of the router.

  • The power supply unit with an output voltage of 9 V and a direct current of 0.6 A.

  • CD with electronic version of the complete documentation and drivers.

  • Twisted pair of 1 m.

  • User's reminder and warranty card.

Time Connection and Setup

In this material, it is recommended to configure in 2 steps TP-Link TL-WR841ND. The configuration is greatly simplified, and any owner of such network equipment can do it. To begin with, it is necessary to collect a temporary scheme. And do it best in relative proximity to the computer or laptop. Also, you will need a free 220 V socket to connect the power supply of the network device to the AC mains. The time scheme in this case on completely switched off equipment is assembled as follows:

  • Install the power supply in the socket. Its wire, in turn, is connected to the corresponding socket of the router.

  • Twisted pair on one side connects to any yellow port with the serial number from 1 to 4. The second end is installed in the port of the network card of a personal computer or laptop.

  • We check the correctness of the assembled circuit. After that, turn on the power toggle switch on the back of the router. We also turn on the computer and wait until the download is finished.

In the future, you need to perform the following manipulations with the router software:

  • We check the network connection settings of the PC at the address "Start" - "Control Panel" - "Network Control Center". Then we select "Adapter parameters" and in the opened list we find the wired network card to which the router is connected. In the window we find the item "Internet Protocol v.4" and open it. Then we set all the flags to automatically obtain IP addresses and DNS addresses. We save the entered parameters and close all previously opened windows.

  • Launch the browser and go to the "Network device settings" panel. To do this, enter tplinklogin.net in the address set line. After that press the Enter key.

  • In the next window, with a request for a user name and an access code, we type in each field a default keyword, admin. We point the pointer to the "OK" button and click on it once.

  • In the window that opens, select the item "Quick Setup". After that, click "Next"

  • In the window that opens, select one of the five available ways to connect to the Internet service provider's equipment. This information is specified in the contract for their provision. In extreme cases, you can find out this question in the customer support center of the provider.

  • Depending on the chosen method of connection to the equipment of the Internet service provider, the appearance of the next window will be significantly different.

    • With PPPoE, PPTP or L2TP modes, you only need to specify the user name and twice the Internet access code.

    • With a static IP address, you must specify the address itself, the subnet mask, the DNS address (primary and alternate), and the gateway address.

    • With the dynamic IP address, the previous step will be skipped.

  • After entering the information, click "Next" again.

  • In the next window, you need to configure the wireless network settings. This and its name, and the access code, and the mode of operation, and the transfer rate, and the encryption method (the default is set by WPA2 / PSK, and it is recommended to leave it), and the working channel of the wireless network from 1 to 11. After making the changes, click " Further".

  • In the next window, to save the settings, click the "Finish" button.

After that, TP-Link TL-WR841ND is completely ready for use. The configuration is completed. It is necessary to turn everything off and disassemble the temporary scheme.

We install the router in place of a permanent dislocation. Functional Testing

Next, install the prepared network device to a permanent location. Connect the power supply. We collect the wired part of the computer network. We apply voltage to the router. After the end of the download (it takes about 60 seconds), we begin to check the health of the equipment. To do this, first on the PC through the wired part of the network we check the availability of access to the global web. We start the browser and enter the address, for example, "yahoo.com" and press "ENTER". After that, the start page of the American search system should open . Then on the smartphone or tablet turn on the Wi-Fi-transmitter and start searching for wireless networks.

After the end of the search, we connect to the network, the name of which was selected in the previous stage. The next step is to enter the password. After that, close all windows, start any mobile browser and similarly try to go to the start page of the US search engine. This completes the test of the TP-Link TL-WR841ND. Firmware, as a rule, does not need to be updated. Even on not quite fresh software, this router functions perfectly.

Reviews. Results

This article details the technical parameters of the TL-WR841ND entry-level router from TR-Link company, as well as its specifications, specifications and reviews. TP-Link TL-WR841ND is an excellent solution for creating small computer networks with an extended range. It is with this application that it is able to show all its best aspects.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.unansea.com. Theme powered by WordPress.