Modern telescopic lifts. How to make a telescopic lift yourself?

Telescopic lifts are necessary to perform high-altitude work related to finishing, installation and construction. They can be used in a confined space, inside buildings and outside. This type of technology today is becoming more common due to safe and reliable design, quick installation and maneuverability.

Description

Moving people and tools on the loader is possible both in the horizontal and vertical direction. There are two main types - mobile and stationary mechanisms. Telescopic lifts, the photos of which are presented above, can be equipped with a diesel and electric motor, each of which is designed for carrying out work under different conditions.

Application

The main part of the design is an arrow, which is sufficiently large and moves in a different direction. Because of this, when using, it is necessary to take into account the surrounding free space.

Telescopic lifts with diesel engine are necessary for the following tasks:

• Wiring;
• Installation of window constructions in high-rise buildings;
• Carrying out of finishing, facade and repair works;
• Repair of transport routes and outboard equipment;
• Organization of installation of air conditioning and ventilation systems.

What you need to know

Modern telescopic lifts are classified as safe loading equipment. They are supplemented by an emergency button to stop the platform and a system to protect against increased loads, that is, if the permissible weight is exceeded, the platform can not move.

Devices in many cases replace the scaffolding, so in demand earlier. Because of the many shortcomings, such as the complexity of assembly and the lack of mobility, forests are becoming less and less in demand.

Features

The arrangement of telescopic lifts is quite simple. The mast is fixed on the facade. It is equipped with guides used to move the load platform. Also worth noting the presence of protective beads and other means to ensure the safety of high-altitude work.

When choosing a technical tool, it is necessary to take into account all the parameters and features of a particular model for speeding up the work and optimizing them. At the same time, the equipment can not only be purchased, but also rented, which is the best solution for short-term tasks. It is worth noting that the repair of telescopic lifts should be carried out only by professionals who have sufficient experience in this field and use high-quality materials and components. The most widespread devices were purchased in the following areas:

• Repair of advertising structures and boards;
• Oil refining and aviation industry;
• Production multitasking processes;
• Housing and communal services;
• shipbuilding;
• Laying of engineering, pipeline networks and communications;
• Warehousing;
• Restoration of facades ;
• building.

Homemade device

At home, most often make telescopic lifts for gypsum board. This construction consists of several mechanisms and additional details. At the same time, if the latter can vary depending on the available materials, then the basic mechanisms are irreplaceable. They need to be done independently, and then put together in a single design.

When creating a self-made device, it is necessary to provide all the components and form in such a way that it becomes possible to quickly and easily transport. As a rule, it is made of folding or removable parts.

Technology

The first step is to create a tripod. This process is not particularly difficult, especially if you have experience with welding.

The profile pipe with the dimensions 8x8 cm is used to create the base. It must have a support that is somewhat higher than its parameters. As it can perform two welded corners.

The required cross-section of the base is formed with the help of a Bulgarian. Then you need to weld the legs, supplemented with braces. When using folding or removable parts, the design will become more compact.

The telescopic tripod is made of three sections of a profile steel pipe. They should have the following dimensions: 4x4 cm, 6x6 cm and 8x8 cm. The parts are inserted into each other and complemented by a plug. At one end, you need to make a latch for the turntable, which can also be removable.

For its manufacture, a "H" -type construction is welded, a through hole is made on the middle bridge for fixing the retractable retractable elements. They are necessary for smooth keeping the drywall sheet and preventing its damage.

The next point is to create a tilt-and-swivel device. The simplest option is to attach a piece of pipe to the structure by welding or bolting. Despite the ease of manufacture, this mechanism is not always convenient when transporting gypsum board. It is possible to use an eccentric or other quick-action mechanism.

Telescopic lift, made by hand , almost ready, it remains only to collect the winch. You can buy a ready-made mechanism in the store and fix it on the resulting design. It should be noted that the way of fastening and its reliability plays a special role. As a fastener, a beam with a brace can come out, all elements of which are connected by means of bolts to allow quick installation and dismantling.