Making beautiful windows: finishing with your own hands

The decoration of the exterior walls of the house with siding makes the appearance of a residential or any other building finished and neat, but this is only true if the materials are properly selected and installed additional decorative elements, which not everyone can cope with. Siding can be made of different materials, but the most commonly used are vinyl and steel, which is due to their qualities.

What kind of siding material to choose: vinyl

To look attractive windows, the finish of siding you can be carried out independently. However, it is important to choose a finishing material that will look attractive and will not cause any complications during installation. For example, vinyl material is more common, as it has many advantages, among them: accuracy and aesthetics, moisture resistance, ease of care and high quality of the material. Among other things, the material is frost-resistant and copes well with high temperatures. If the surface of the panel is contaminated, it will be possible to get rid of sewage by using a wet rag.

When to choose a metal siding

If you want to look attractive windows, the finish of the siding can be carried out. However, it is important to decide which material will be the basis for the panels. It can be a metal that is more durable than vinyl and can last up to 50 years. On its surface during the manufacturing process, a polymer coating is applied, which is capable of preserving the material from corrosion. Such protection also improves the appearance of the material, since it can have different colors and imitate natural materials. Metal differs heat resistance, flexibility, which is especially important when decorating windows with special profiles. That's why when using vinyl siding for walls, consumers prefer to install metal panels around the windows. But this material still has one drawback, which is expressed in a more significant weight compared to the vinyl variety.

Preparation of tools for finishing windows

If you complete the windows siding outside, it is important to take care of all the necessary tools before starting work. Among them, it should be noted:

• Scissors for metal;
• A hacksaw on wood;
• Knife-cutter.

Scissors are needed to cut the material from above, in the place where the mounting holes are located. This tool will be necessary for the figured cut when installing siding in arch openings. It is important to correctly choose a hacksaw for wood, as well as metal, which must have small teeth. As an alternative solution is an electric saw. It should also be remembered that when cutting the panels it will be necessary to hold the strip with a knife, only after the material is bent and unbend several times, in this case, the siding will be easily broken along the intended line. Among other things, for installation work you will need:

• Screwdriver;
• level;
• Self-tapping screws;
• a hammer;
• Gon;
• a piece of chalk;
• twine.

Using a square, you will mark the angle of mounting the material around the openings and on the slopes. The level should be at least half a meter in length. But to repel the line of installation can be with the help of twine and chalk. Siding will be strengthened by self-tapping screws.

For reference

If you decide to refine the windows, the finish of the siding can be carried out. So it is important to remember that the fasteners must be made of galvanized metal. This is required in order that under the influence of moisture elements are not covered with rust and do not damage the lining. It is important to choose the size of the fasteners. Thus, the appropriate diameter of the cap is one centimeter. As for the length of self-tapping screws for siding installation, a parameter of 2.5 cm is usually chosen.

Preparation of components

To install the siding around the openings it is necessary to prepare the components, they are galvanized metal supporting profiles and other consumables. Sometimes installation is possible with the help of a lath of wooden beams. However, it must be remembered that this material is very susceptible to moisture. Therefore, it is necessary to prepare a completely dry bar, which is pre-treated with moisture-repellent impregnation. Siding can not be installed without galvanized load-bearing J-profiles. A to comply with the installation technology, the rail must be mounted along the perimeter of the opening. If you plan to install with slopes, then you need to buy angular double-sided profiles. If there are in the house euro windows the installation of tides under the visors and windows is not required. Otherwise, you will also need to purchase these components.

Preparatory work

If you want to look attractive windows, the siding finish of this part of the house can be carried out by yourself. However, initially it is necessary to take care of the preparation of the surface. For this, the master has to dismantle extraneous elements and trim that protrude above the surface of the walls of the building. It is important to make sure that the surface and slopes are dry, unevenness and potholes need to be plastered. In the presence of large slopes, as is usually the case, care must be taken to install two-sided angular profiles. For this reason, experts recommend that the slope is leveled with plaster mortar and also treated with a water-repellent primer of deep penetration.

Installing the burr

If the windows will be finished siding with their own hands, then there is no way to do without a litter. It is a load-bearing frame, which should be located along the perimeter of the opening. First, marking is done, for which it is necessary to use a gon, a long level, a string and a chalk, as well as a water level building. A long level is useful for leveling the frame, but its water type is needed to measure the installation level of the lower and upper carrier profile. When vertical and horizontal lines are to be removed for mounting the frame, place them along the level, and use a square to form a right angle.

For reference

When you take measurements, you can not orient yourself at the angle of slopes. It may happen that their inclination is not correct, this will help the level and gon.

Siding installation

Finishing windows with siding with their own hands provides for compliance with the technology, according to it you need to determine the distance under the window. Each side should have a margin of 6 mm. Among other things, the cutout in the panel needs to be made wider than required by 6 mm. The gap should be formed using scissors for metal. Until the panel is in place, the J-profile is installed at the bottom of the window, into which the products will be inserted. This will add aesthetics to the finish. At the next stage, the siding sheet is installed along the width of the opening, it must be flush with the window frame. By the same principle, siding is mounted above the opening, as well as on two sides.

Advice of a specialist

Connection of the J-profile must be carried out by a certain technique. It says that in the bottom of the vertical profile, you need to cut a bend in the shape of a tab. In the lateral profiles, which are located vertically, the inner corner is cut off, it must be equal to 45 °. Only now you can connect the profile.

Installation of an external corner of a bearing profile for installation of siding around windows in the presence of slopes

You can be independently finished with siding at home, windows can have slopes, in which case you need to act somewhat differently. The first step will be the installation of a corner of a two-sided angular profile, in it a finishing cloth is wound. During the installation of the angular profile, make sure that the fastener is located in the central part of the hole, only in this way you can eliminate the deformation of the profile. On the perimeter the supporting profile is mounted, the slopes are made with siding, while the trim is installed in the grooves of the profiles. Panels should be placed as horizontally as possible, this will ensure not only durability, but also the strength of the cladding.

How to be with arched openings

Window decoration for siding can also be carried out when the opening has an arched shape. Preliminary in this case, you should purchase a flexible carrier J-profile. This element is located around the arch, and the nails are driven in at a distance of 15 cm from each other. There is no need to leave a gap between the hardware and the panel. This is only true for the connection of a flexible profile and a bearing lower profile along the corners. The next step is to install the material according to the technology described above. In this case, the screws must not enter the web tightly, it is necessary to take into account the temperature expansion of the material when heated.

If you are finishing the windows with siding, the step-by-step instruction presented in the article will allow you to exclude errors. But it should be remembered that not every home master is able to install siding in arched openings, since this work provides for the presence of professional experience. For the reason that the price for such work is not too high, it is best to entrust the matter to specialists.

Nuances of installation of vinyl and metal siding

The decoration of windows with metal siding is no different from the technology of installing vinyl panels. As a departure from the methodology, it is only necessary to use additional elements from the same material. In all cases should be guided by the width of the slope, which will determine how to install the finish. If this parameter is approximately equal to 20 cm, then the space should be covered with a lining. Do this vertically or horizontally. To install the siding inside the slopes, you will need a J-profile. But if we are talking about slopes of medium width, then for their finishing there is no need to use siding. To do this, you can purchase special slats for similar slopes, the width of which can be made the one that is necessary. This will only need to remove excess material with a knife. But the edge of the bar will also be installed in the J-profile or the finish profile. To install these slats you need to cut them or turn corners.

Features of installation of a wire

Finishing of windows with siding from the outside is usually carried out along the pavement. It is a series of vertical beams made of wood or metal. The outer edges of the bars will form a virtual contour. It is important to make this support as level as possible, this will determine the attractiveness of the appearance of the finish. Initially, you should determine the right angle from the bottom of the opening, and after you set the start profile to the labels, then you need to make the rest of the markup, guided by the lower dimensions. In the corners of the opening from the profile, an angle must be formed, for this purpose UD and CD profiles are strengthened. The inner corner of the siding will be laid on this blank. Finishing of windows with vinyl siding must necessarily be carried out along the dredging, except for the opening, the width of which is less than 19 cm.

Conclusion

Finishing the window with the siding, the photo of which is presented in the article, should be conducted using a certain technology. It provides for fixing the last bar under the cornice after fixing the finish profile. The cutting of blanks should be carried out only on a special table, with the use of a disk saw.

Before purchasing materials it is important to make a calculation so that there is no overspending. Most often the length of components for the siding is 3 m, so when calculating the right amount of material for finishing, you need to divide the total perimeter of doors and windows into three. The length of the components can vary depending on the manufacturer, which is why this feature should be taken into account by you when carrying out the calculations.