How to make beds from boards with your own hands: instruction, materials

And have you ever thought about why, with all the merits of high beds, these are not often seen? This is due to the fact that many owners of suburban areas believe that the arrangement of wooden beds is quite difficult. In addition, not all home masters have these skills. But if you are still thinking about how to make beds from the boards with your own hands, then you need to put everything in order to get neatly and beautifully folded sides, ready to serve more than one year.

As practice shows, the harvest collected from such unusual beds, exceeds the usual. Cultivation of cultivated plants in wooden structures can be carried out as soon as the snow comes down. Early ripening cultures mature here, among them: radishes, lettuce and onions. All this is due to the fact that such a bed contributes to a better warming of the earth, because the usual surface in late April still retains a layer of frozen soil. But for a greenhouse this approach will be ideal.

Manufacturing of construction No. 1

If you are faced with the question of how to make beds from the boards with your own hands, then you can consider to begin with the manufacture of a structure that is simple. It is suitable for those summer residents who do not like working with wood. First you need to determine the size of the future box.

Popular methods today recommend growing crops in wide boxes, this parameter should be about 160 cm. For a greenhouse this option will be optimal. The next step will be ground preparation. It should be well loosened and leveled in the place where you plan to build.

For anyone who is looking for an answer to the question of how to make beds from boards with their own hands, photos of such designs will become the best assistants. They will allow you to understand how such a product should look. For the work should be prepared four boards, the height of which is 30.5 cm. 8 boards should have a length equal to 120 cm. It will take four pegs, which will form the basis of the central pillars. Their length will be 61 cm.

The building material must initially be prepared correctly. Sidewalls are usually made of trimmed inch, the width of which is 15 cm. For this purpose it is convenient to use wood. This is a natural environmentally friendly material that will allow you to fix the elements of the bed with each other with the help of staples or screws.

Before installing long sideboards, do not forget that the central profile will need to be screwed onto the floor immediately. Those gardeners who are thinking about how to make beds from the boards with their own hands, the instruction for the beginning is read. From it and you can understand that in all corners of the future design it is necessary to score on the peg. The wall is installed in the next stage, here you can install a longitudinal beam, which will connect the corners. The second beam is installed on top of the first, their ends must converge with the boards at the corners. With the help of a gon, you need to check whether the corners are perpendicular.

Assembly Features

When installing walls, you must follow their vertical position. However, the support pins must remain outside. Two side beams are screwed in the next stage, they need to be strengthened to four racks, so that the ends of the strips converge with pegs.

Now you need to make sure that the workpiece has a square shape. It should be measured on the diagonals and compare them. The box is aligned until the diagonals are the same. If you are faced with the task of how to make high beds of boards with your own hands, then the next step is to strengthen the frame.

At the central point of the outer wall, two racks should be located. They are digging into the ground, so that the top edge of the rack is flush with the top of the crossbar. The rack is fixed with screws, with the rest of the walls it is necessary to do the same.

The second version of the manufacture of strong boxes

If you have a garden board and the experience of carpentry, then the beds can be performed using a different technology. To begin with, the design should be marked out, and after cutting off the unnecessary parts of the boards. With the help of a gon, you will be able to determine the angles so that there will be no problems when assembling. The boxes themselves are fastened on bricks. To begin with, it is necessary to prepare the elements for several boxes, it is important to make sure that the designs turn out to be rectangular, otherwise their ends will be connected problematically. There will be gaps that are not needed.

Finished boxes are installed in the next stage. If there is already something planted in the greenhouse, then this will not be a problem. Mount these can be any time. But if there are cucumbers and melons growing in the greenhouse, the stems of which have already appeared in the aisles, then it will have to wait until the fall. When there is a possibility, it is worth choosing a wood species that is not so susceptible to destruction. Otherwise, the boards should be treated with a substance that will not be able to damage the plants.

Making beds in the form of a pyramid

Quite often summer residents are wondering how to make beds of boards with their own hands in a greenhouse. The most interesting idea for this is the pyramids. They can grow not only vegetables and greens, but even flowers. In this house is particularly well-behaved garden strawberries and strawberries.

The most impressive advantages of this bed are the space saving in the greenhouse and the openness of the ultraviolet of each plant. To carry out the work, a dried board must be prepared in an amount of 11 pieces, the dimensions of each element should be equal to 200 x 50 x 2.4 mm. Among other things, you will need the following tools:

• Hacksaw or electric jigsaw;
• drill;
• Gon;
• roulette;
• protractor;
• Screwdriver.

Methods of work

If you are faced with the question of how to make a fencing plank of boards with your own hands, then use the following instruction: in the first stage, you need to take 4 two-meter boards, which will be the supporting ones. At one end of each, cuts of 30 ° must be made. At other ends, the cut must be made at 60 °. In the end, the boards must remain two meters high. This will provide the same basis.

To join the boards, you should prepare a bar, the dimensions of which will be 50 x 50 x 400 mm. He will act as the basis for the side faces. Two boards, at which the ends were cut at an angle of 60 °, are stacked to each other, a bar is placed between them. Elements are leveled and tightened with screws. Now the product that turned out when twisting at the previous stage, it is necessary to put and lean the edges with angles of 60 °. Everything is fixed with screws.

In order to fix the longitudinal shelves, they are marked with faces, and then the sides are measured. On the faces of the future design, which go from the bottom, it is necessary to make 6 marks through 285 mm. These manipulations must be repeated with each support. For proper alignment, you should measure the distance between the faces, everything should be on the same level. The figures add up and divide by 4. This will yield an average value that will make up the length of the horizontal supports. On her face and will need to expose.

Shelving and installation of the pyramid

Before you make the beds from the boards with your own hands, you must complete the shelves. The obtained figures must be measured, and after cutting off on them four boards. On the sides they are cut at 30 °, but only on one side. The other side must remain as it is. These actions must be repeated for each level of sticks.

Now you can move the long supports and horizontal boards into the greenhouse, where the bed will be installed. Moving it after will be quite problematic due to its impressive size. Each horizontal support is fixed to the three screws on the marks that you made earlier.

Vertical faces should be set perfectly smoothly, for this it is recommended to use a level. If you are faced with the question of how to make beds from the boards with your own hands, then the horizontal shelves must be leveled, they should be at the same distance from the surface, then the ground will not ask.

Filling the pyramid

Begin filling with the bottom shelves. To do this, everything is covered with soil and well trambuetsya. Thus it is necessary to move up to the uppermost row. As soon as the bed is ready, it can be replaced by greenhouse plants. It is important to know also what to fill such a design.

At the bottom you need to lay a metal mesh, which will provide reliable protection from rodents and moles. The next layer is wood, paper and cardboard. All this will serve as a good drainage. Now you can pour large-fraction sand and a mulching layer of sawdust, fallen leaves or grass. All this is well watered with water.

Final work

The next layer will be a 30-centimeter fertile soil, which should be well sealed. If you were wondering about how to make beds from boards with your own hands, a photo of such constructions is recommended to be considered beforehand. However, at this stage, we can assume that the pyramid is ready and it can be used. It has a low cost, but will be ready to serve you for about 10 years.

Additionally about the sizes

If you are thinking about the question of how to make beds from boards with your own hands, the dimensions of such structures must first be carefully thought out. For example, for perennial grasses and strawberries suitable for low construction with an impressive volume of soil. Such beds can have the form of a floor or pyramids.

While for the greenhouse crops pyramids with a well-thought irrigation system are needed. Vertical pyramid for vegetables makes a height of 1.8 m. Width can be 1 m. In this bed, feeding can be performed using the technology of automatic supply of nutrient solution.

Advantages of beds from boards

Before you start to work on the described beds, you need to consider their advantages and disadvantages. Among the first it is necessary to allocate:

• High yield;
• Long service life of beds;
• Serviceability.

Before you make plots of planks yourself, the benefits of such designs you should consider. Among other things, it should be emphasized that with the help of such an approach it is possible to obtain a fairly rich crop even in cold regions.

The main disadvantages

However, such designs have their drawbacks. Among them, summer residents especially emphasize the need to allocate time for the manufacture of structures. In addition, they will have to handle special substances that will prevent rotting and spoilage of the material. Before you make plots of planks yourself, the shortcomings of such designs you should consider. Among other things, it should also be noted that every spring elements of wood will have to be varnished or painted. But if it's not enough to approach the manufacture in good faith, then such constructions are capable of spoiling the landscape, which can not be called a plus either. But if you have experience, the beds can be very attractive, which is also true if you plant them with flowers.