Rag-jelly: manufacturing method

Cleaning for most people is a tedious and uninteresting occupation, which does not bring particular joy and pleasure. Especially if you clean the dirt from a hard-to-reach place. Most of the difficulties arise when processing the keyboard, telephone sets, vehicle panels and other devices that have a large number of small parts. However, the rag-jelly will help to cope with the task. This is an original and practical device that can be manufactured independently from available materials. Let's consider several ways to create it.

Advantages and features of the product

The main feature of such a rag is the ability to penetrate hard-to-reach places. Such a device cleans the surface much more efficiently than other means. A jelly cloth is made by hand in a matter of minutes. Despite its simplicity, the device has many advantages, among which:

1. Reusable use.
2. Destroys up to 99 percent of all microorganisms on the surface of the product.
3. A jelly cloth can penetrate any hard-to-reach place.
4. In its composition, the product has no toxic and harmful components.
5. After cleaning on surfaces there are no stains and other traces.

Such a product is a guarantee of cleanliness of any surface. At the same time, boring cleaning turns into an interesting and uncomplicated occupation. The main disadvantage of a jelly rag is that, if stored incorrectly, the product quickly loses its elasticity and becomes unusable.

How to make a rag-jelly

Before starting work it is necessary to prepare all the components in advance. To get a rag-jelly, you will need:

1. Two full glasses of water.
2. One glass with marks for accurate measurements.
3. ½ teaspoon borax. This component can be purchased not only through the online store, but also in any pharmacy.
4. Glue PVA - 140 grams.
5. Dye food. You can not add this component. However, with it the finished product looks more attractive.
6. A plastic container in which all components will be mixed.

Stages of manufacture

A jelly cloth is a simple device that you can make yourself. The process of creating it is quite simple. However, the result is an excellent tool that allows you to easily clean up any hard-to-reach place.

To begin with, pour a glass of warm water into a deep container and add a borax to it. The components must be mixed well. As a result, a homogeneous mass without lumps should be obtained. In plastic utensils should pour glue PVA. It is also worth adding ½ cup of warm water, as well as a few drops of dye. The resulting composition should be well mixed until homogeneous.

Two finished mixtures should be connected, pouring them into one container. They should be mixed thoroughly. You can do it by hand. You need to mix it as a dough. It should be noted that the jelly-jelly is non-toxic and represents a safe product. The product should be dry to the touch, sufficiently firm and elastic.

That's all. The device is ready for use. The shelf-life of such a wonder-rag is not limited. However, it should be stored in a plastic container under a tightly closed lid.

Than to replace a borax

A rag-jelly for cleaning hard-to-reach places can be made in another way. If there is no possibility to purchase a bore, then this component can be replaced. In this case, it is better to use liquid starch. It should be noted that with such a component, the jelly-cloth does not turn out to be so elastic. However, it does not lose its unique properties. With its help you can remove dirt from hard-to-reach places.

How to prepare a rag-jelly with liquid starch

For manufacturing you will need:

1. One glass of warm water.
2. One teaspoon of starch, liquid.
3. Glue PVA - 140 grams.
4. Dye food.
5. A plastic container in which the components will be mixed.

How to make

The principle of manufacturing a rag-jelly with liquid starch is similar to that described above. In a separate container you need to mix half a glass of warm water and liquid starch. The components should be mixed well. In a separate container, preferably from plastic, it is worth mixing half a glass of warm water, PVA glue, and a few drops of food coloring. The components must be mixed until a homogeneous mass is obtained.

In a bowl with the resulting composition, you should carefully insert the starch solution and mix thoroughly. Mix jelly with hands, like dough. As a result of manipulations, a firm, but dry and elastic mass should be obtained. Now you know how a jelly cloth is made. Store this product in a plastic container under the hermetically sealed lid. Otherwise, the jelly rag will lose its unique properties.