Antiseptic XM-11 - specifications

Antiseptic XM-11 has unique technical characteristics, which is why it is in demand among consumers. However, in order to achieve the expected result after its use, it is necessary to know its features and observe the application technique. Thus, in order to calculate the required amount of antiseptic for surface treatment of a certain area, it is necessary to know its consumption, it is 50 g / m ² .

Initially, it is necessary to determine the area of the base with which it is necessary to work, and then to divide this value into the consumption of antiseptic, which will determine the amount of the composition to be purchased for the work. Apply the mixture with a brush, which is previously immersed in the composition. The work will be completed in a shorter time, if you use the technology of spraying under pressure. Antiseptic XM-11 has excellent efficiency. Thus, after the surface has been treated with the described mixture, the life span of the mixture increases, and it will be possible to use it without needing repairs for 25-50 years.

Scope of use

If there is a need to protect the wood from rotting processes, as well as to stop its premature aging, then it is necessary to apply the described antiseptic. In addition, a similar composition is able to protect the material from the corrosive effects of atmospheric precipitation, the surface will be perfectly handled after treatment with any moisture. Quite often, wood products contact soil and water, this applies to elements of cooling towers, supports, bridges, pillars, moorages, buildings and structures, power lines, piles, log houses, etc. In this case, treatment with an antiseptic is simply necessary.

Packing and cost

Antiseptic XM-11 is available in several varieties, it can be, for example, dry mixes, which are packed in plastic containers in the form of buckets. Thus, if you buy a bucket with a capacity of 2.5 kg, then you have to pay 1050 rubles. Whereas packing in 5 kg costs 2080 rubles. There are more voluminous containers - 20 kg each, the composition in such quantity will cost 8250 rubles. On sale there is an antiseptic and in a paper container, which consists of strong four layers and has a polyethylene liner. Such bags have a capacity of 20 kg and have a cost of 8,200 rubles.

You can buy and water solutions of antiseptic composition, which are sold in polymer canisters of different volumes. So, 5 liters of the mixture will cost the consumer 285 rubles. With a volume of 10 liters, the cost increases to 568 rubles. While 20 liters of antiseptic will cost 1120 rubles. The most impressive volume of a can of 30 liters costs 1680 rubles.

Characteristics

Antiseptic XM-11 has two main components, it does not wash out and does not have a smell, after application the wood acquires a greenish shade. After the composition has been applied to the surface, it can be subjected to gluing and painting on it . At the same time, it still remains protected from external harmful effects, the properties of the antiseptic do not change. Yaroslavl antiseptic ХМ-11 has the same characteristics. It perfectly protects the surface of wood from the effects of biological parasites, as well as the damage that bacteria, all kinds of fungi and insects can inflict. Excellent repels antiseptic and crustaceans, as well as mollusks.

Certification

The antiseptic of the brand in question is produced according to the rules and corresponds to hygienic and sanitary standards. When buying, you must always require a certificate of quality.

Technology of use

After purchase, the antiseptic has yet to be prepared. Begin to do this before it is used directly. Preparatory work assumes carrying out of dissolution if it is a question of dry structure. Use in this case requires warm water, the temperature of which is 40-50 ° C. The material should be added in an amount of 1 kg per 9 liters of water.

To ensure the stability of the solution, acetic acid must be added to it. You need to use the one that has the qualification of "ice". This ingredient should be added at the rate of 0.5 ml of acid per liter of solution, in the case of 9% table vinegar, it must be added in an amount of 5.5 ml per liter of antiseptic mixture.

Antiseptic XM-11, the characteristics of which are worth exploring before use, after preparation can have a fine precipitate, in addition, it is possible the presence of some other mechanical impurities.

Recommendations for application

Once the solution is ready, it should be applied to the surface, but it must be prepared beforehand. The base should be thoroughly cleaned from dust, old paint, chalk, and also lime, there should not be other extraneous layers. The surface of the wood should be covered evenly, leaving no passes is necessary, since they can subsequently become vulnerable.

Antiseptic XM-11, the technical characteristics of which are described in the article, can be applied not only in the manner described above, but also with the aid of a roller. The application should be made in 2-3 layers, between which it is absolutely necessary to take a break in two hours or more.

There is another way of processing parts, which involves full immersion of the element in the composition of the antiseptic. In this condition, the wood should be left for 5-10 minutes. It is often enough to impregnate under pressure, but it will be necessary to use special equipment that involves the use of a warm-up and a cold bath. Pressure can be vacuum-atmospheric, but this is not a complete list of technologies.

Ideally, if the antiseptic non-washable XM-11 when applied will have a temperature of +10 ° C, but allow a degree or more, but not more than +50 ° C. Do not work with frozen timber. The composition will be fixed on the wood for 10 days, during this period the surface should be protected from rain and moisture.

Consumption rate

When impregnating wood by applying a brush, sprayer, roller, and dipping technology, its consumption will be 50 g / m ² . If you use not dry composition, but impregnating solution, then the consumption will be much larger and become equal to 500 g / m ² . If the pressure is applied to the impregnation of wood, the consumption of the mixture will vary from 5 to 15 kg / m ³ , with the use of the impregnating composition, the flow rate will be 50-150 kg / m ³ . This is important to take into account before buying wood treatment, which will avoid unnecessary waste of money.

Safety precautions

Antiseptic for wood XM-11 is toxic, but does not burn and is not explosive. Such solutions are classified as low-risk substances. Work should be conducted outdoors or in a ventilated room.

Storage

In dry form the composition must be stored in a well closed container. Shelf life is unlimited. Solutions should be kept in a heated room, the packaging should be well closed. The warranty period for storage of the product in dissolved form is six months from the date of manufacture.