Woodworking machine "Belmash SDM-2500": reviews

If you are interested in the Belmash SDM 2500 machine, then you should know that it is the equipment that has the highest power among the models in this series. The device is characterized by unique operational and technical qualities. Thanks to them, the device with equal efficiency can be used to solve problems in everyday life and small-scale production. However, if in the household you do not often use such equipment, then it is recommended to purchase equipment that will be cheaper and easier in a functional sense.

Feedback on appointment

The machine "Belmash SDM 2500" is designed for processing wood products, they, according to users, can have different shapes and configurations. The design can be used for a long time, it has compact dimensions and not so impressive weight. In addition, consumers pay attention to the affordable cost. If you are considering such equipment and want to purchase it for yourself, then, first of all, it is necessary to consider possible operations. To do this, you need to read the information from the technical passport, as well as with the performance.

Consumers point to the need to prepare a sustainable desktop, since the equipment is not so impressive height. You can consider the option of buying a finished structure that was manufactured in a factory. According to the buyers, the Belmash SDM 2500 equipment can:

• To plan;
• Jointer;
• Sawing;
• Milling;
• drill.

If you need to remove the part, you should be aware that the device has several processing modes of this type, it can be working with edges, edges and plates. But the sawing can be done along and across the fibers of the workpiece.

Cut at an angle

Especially often, users are cutting at an angle, for this the manufacturer has provided for a special device. But you can milled with the help of end and disk cutters.

"Belmash SDM 2500" can be used in open areas, in non-residential premises or under a canopy. In order to remove waste products, the design has a branch pipe for connecting the chipper. It must also be taken into account that the equipment does not have a special protection against moisture. If you want to transport the equipment, it must be installed on the work surface, fixing the moving parts before it.

Reviews about the positive qualities

The machine "Belmash SDM 2500" has many advantages, but it is not devoid of shortcomings. For example, the manufacturer took care of the reliability, for this, the design was changed, which had a positive effect on the duration of operation. As the buyers say, in the hinge pairs, which are located in the acute-angled table, slip bearings are inserted . They increase the time of unattended operation. For the reason that the design is small in size and weight, there are additional stiffeners in the frame. Buyers argue that this addition can increase the stability of the structure.

A positive characteristic can be called the quality of assembly, blocking of planing tables, as well as the presence of components with which the user can increase the number of operations performed. We can not fail to mention the welded structure of the case, due to the absence of bolted joints, the play is reduced during the operation of the machine.

Security

For maximum security, you can not perform two simultaneous manipulations simultaneously, this is ensured by locking the tables. The device can be connected to a household electrical outlet. The machine can be switched off and on by means of a moving block, its position can easily be changed by position, which, of course, will depend on the operator's position relative to the machine.

Negative feedback

Woodworking machine "Belmash SDM 2500" has some drawbacks, which users consider not so impressive. For example, the manufacturer did not take care of the presence of a measuring ruler on the surface of the desktop. When fixing the height of the disc, during which the lamb is used, its displacement relative to the vertical plane occurs. That's why the user has to control the cutting angle manually.

Additional expenses

The disadvantage, according to buyers, can be considered and the need for additional purchase of a compressor. It will allow you to get rid of excess shavings while the machine is working. As one of the problems is the clogging of the output channels in a short time after the start of work, this may cause a decrease in the quality of processing of products.

Reviews about technical characteristics

Woodworking machine "Belmash SDM 2500", reviews about which can help you make the right choice, has unique characteristics. In order to learn how to work with the machine, you must study them. For detailed consideration, it is best to analyze each function separately. For example, the dimensions of the structure are as follows: 94.9x84.9x51.2 cm. The total mass of equipment with additional components is not more than 56 kg. The rated power consumption is 2.5 kW when connected to the household electrical system. This, according to buyers, is quite enough to handle even massive billets from wood at home.

You should consider in more detail and the characteristics of planing. Thus, the maximum width is 270 mm, but the maximum thickness of the workpiece is equivalent to 65 mm. The value is indicated with the condition of using the mode device. In one pass, you can set a depth of 3 mm. But the permissible dimensions of the part to be processed are 200x27x11.7 cm. When consumers purchase a woodworking multifunctional Belmash SDM 2500, they also pay attention to the dimensions of the table, in the described model they are 90x28.7 cm. The clamping device Made of plastic, in practice it is not used, since it has rather poor performance characteristics. As an alternative solution, consumers use self-made structures.

Sawing of blanks is carried out using a disk that is located in the central part of the desktop. The design assumes the possibility of changing the position relative to the surface. This allows the user to adjust the depth of the cut.

Reviews about the characteristics of sawing

"Belmash SDM 2500", the clamping device of which, as mentioned above, is often not used in practice, has certain characteristics of sawing. For example, the depth range varies from 0 to 11.7 cm. But the dimensions of the disk mill for "Belmash SDM 2500" are not more than 12.5 cm. According to the buyers, the maximum possible diameter of the disk is 31.5 cm, but the ranges The cutting angles along the fibers are 45 °, if it is a transverse treatment, the degrees can vary in both directions.

Users are advised to use the drive instead of the saw blade, when special grooves are formed. It is important to take into account that this element is not provided for by standard equipment. The end milling cutter should be used on a separate desktop, by means of this unit you can perform drilling, and for this the user will have to use a special cartridge.

Feedback on the characteristics of the final drilling

Consumers pay special attention to the characteristics of milling, while the diameter range can vary from 6 to 12 mm. The size of the desktop is 47x19 cm, and the speed of the shaft is 770 revolutions per minute. To install the equipment, the minimum table area is required, which is limited by the following dimensions: 44.1 × 24.6 cm. It is necessary to take into account the stability of the device. As the buyers emphasize, otherwise, there may be a vibration that causes defects on the surface and equipment failure. If you use the Belmash SDM 2500 machine according to the instructions, reviews about which are often only the most positive, the deviations of the angular dimensions will not exceed 5%. But increasing the power of the machine is possible by 15% or less.

Positive feedback on performance

According to users, this equipment has a perfect combination of price and quality. The device scales and saws, and its adjustment is relatively simple. The user will be able to install the cutter, and in the process of working to develop creative thinking. If you need to periodically perform work in the workshop or at the dacha, which do not provide for special accuracy, then this unit is perfect. The engine is quite powerful, for a six-month practice, most users it did not fail once. The clamping device strongly benefits some users, despite the fact that its quality, as mentioned above, is not so high.

Using the machine tool "Belmash SDM 2500", reviews about which help many users make a choice in its direction, consumers note that pleases the height of the cut, as well as the high quality of the disc. It is worth noting also the minimum curvature of the working surface. To raise and lower the working saw does not have to make special efforts, it is quite easy to carry out these manipulations. The manufacturer has also taken care of the smooth start, which is well manifested in the work. The handle of the start and stop is thought out, it is noted by a lot of buyers.

Conclusion

Quite often in working with the equipment described above, you have to use milling cutters. For "Belmash SDM 2500" you can buy similar consumables for 1500 rubles. Consumers can also care about the question of whether there is an opportunity to eliminate the curvature of the table. Many users try to solve this problem. However, perhaps, it can be called one of those that are not so significant in working with such equipment.