Machine choreographic: dimensions. Double-row choreographic machine

Dancing lessons become fruitful in the presence of a specially equipped room. To do this, it is sometimes sufficient to install a choreographic machine, which consists of rails, racks and brackets that can be attached to both the floor and the walls. With its help it is convenient to practice exercises and dance elements. Regular classes allow you to improve stretching, flexibility, coordination of movements.

Mobile construction

Currently, you can install a mobile choreographic machine or use a stationary device. Portable devices are in demand in Western countries. On such machines it is convenient to deal with both beginners and dancers with experience.

Thanks to the advanced adjustment system, the mobile choreography machine can be fixed in a static position on almost any uneven surface. It is enough to put the fasteners in the desired position.

To adjust the position for training people of different heights, it is enough to twist the choreographic machine a little. The height of the mobile structure is adjustable due to the movable threaded connections.

If there is a need for transportation, the dismantling of the machine and re-installation in a new location is not difficult.

Stationary choreographic machine

Its advantages are available for stationary designs for choreography. The main advantage is the availability of additional stable brackets and supports. Therefore, during operation, the stationary choreographic machine is more reliable.

However, such structures must necessarily be installed on flat surfaces, which creates some inconvenience in the presence of a deformed floor or wall covering. Therefore, to acquire a choreographic machine stationary plan is recommended in the presence of a permanent spacious room with quality finishes.

Single-Level Machine

One-level designs are widely distributed in ballet schools. They differ in their light weight, and also in their special simplicity of assembly. If necessary, it is possible to adjust the height of the crossbar for alternating occupation of certain age groups.

As a standard for single-level choreographic machines, the following dimensions are considered to be:

• The interval between the individual racks is 2 m;
• Height - 1,1 m;
• The diameter of the pillars is 38 mm;
• Diameter of the handrail is 50 mm.

Double-row choreographic machine

The presence of several rows of crossbeams is caused by the need for simultaneous occupations of people of different height and age. Children can safely hold on to the bottom rail, while dancers of the adult age group - for the upper.

Double-row choreography machine can have the following dimensions:

• The height of the upper handrail is 1100 mm;
• The height of the lower crossbar is 750 mm;
• Diameter of the handrail - 50 mm (metal) or 40 mm (wooden);
• The diameter of the pillars is 38 mm;
• Fastening to the wall - pipe diameter of 25 mm.

Materials of manufacture

Ballet choreographic machines can have wooden or metal handrails. Cross-beams from coniferous species of wood are resistant to moisture and medium mechanical loads. Effective for classes of younger age groups in specialized classes. Suitable for home use, affordable and affordable.

Professional machines choreographic portable and stationary models often have handrails made from valuable types of wood - oak or beech. Such materials are excellent at high loads. Such crossbeams are installed on choreographic machines in sports clubs and studios for the employment of experienced dancers of the adult age category.

Some machines have handrails made of chrome-plated steel. This option is very rarely used, for which there are several reasons. After obligatory ventilation of the hall between separate sessions, the metal quickly cools and remains so for a long time. This feature makes the dancers feel some discomfort.

Unlike wooden bars, metal do not absorb or evaporate moisture, which remains on the surface when in contact with hands. Steel products quickly become slippery, which can disrupt the balance of the dancer and lead to injury. Therefore, chrome-plated material is often used to make racks, and is also used as a decorative solution for the design of halls.

Mounting Features

Choreographic portable machines are installed on stable supports. You can place them on any horizontal surface, and if necessary, move them to another location.

Stationary models are attached to the ceiling, walls, or both. The latter solution is particularly reliable, but it is not possible in all cases. For example, if the hall has an expensive finish of walls and floor, where it is undesirable to carry out excess holes, preference should be given to structures with ceiling mounts.

A reliable installation of a choreographic machine requires compliance with a number of conditions:

1. The length of the structure should be at least a meter. The limit does not exist and it depends on the parameters of the room, the amount of free space.
2. It is not recommended to install racks longer than two meters, because in time they can deform and flex from heavy loads.
3. Before installation, the specialist must determine the optimal location and the most reliable way of fixing the structure for choreography.

Which choreographic machine is best for home?

It is difficult to answer this question unequivocally, as individual dancers have different needs. If one family member plans to be engaged, it is better to be inclined to choose a single-row stationary or mobile type. Much more convenient for several people of different ages will be a two-row design.

As children grow just in front of their eyes, the ideal product will be a product with telescopic retractable racks, which will easily set the handrails to the required height.

Tips for choosing

Choosing a choreographic machine for studying at home or setting in a dance hall, it is worth concentrating on several important points:

1. Even with a particularly limited budget, preference should be given to wooden bars, because the metal surfaces are not very practical and, moreover, are quickly covered with rust as they are used.
2. Depending on personal needs and hall parameters, you can choose a design from 1 m to infinity.
3. For the practice of folk dances, where there is a significant load on the handrails, it is recommended, together with a choreographic machine, to purchase additional fasteners, which will ensure the reinforcement of the structure.
4. Before buying a particular model, it is worthwhile to make measurements of the hall in order to determine in advance the optimal method of attachment and to choose the position of the future projectile.
5. If the existing conditions do not allow the fixing of the machine at the owner's request, alternative options should be agreed with the master who will be engaged in the installation.
6. The service life of choreographic designs largely depends on the nature of the operation. It is forbidden to sit on the machines, independently untwist attachments, mount and dismantle without appropriate skills.

Eventually

Initially, it is recommended to purchase high-quality choreographic machines from reputable manufacturers. Only in this case can we expect the possibility of effective operation of the device for decades. The main thing is that training on a properly selected reliable machine will bring pleasure and benefit.