What are the technical characteristics of a tiller?

Every farmer engaged in agrarian business knows that for good harvests, which will become a source of stable income, it is necessary to have a fairly large arsenal of equipment. Tractors, combines, watering plants, seeders and tillers. In this article, it will be specifically about mills, their purpose and technical characteristics.

Tillage: the purpose of the tool

Agrarians know how the state of the soil affects the harvest. Therefore, to the process of loosening, getting rid of weeds, they approach very responsibly. And here the tillage milling cutter comes to the rescue. This is a true "jack of all trades". Sometimes it is enough to have a small tractor and a milling cutter to provide almost all the agricultural equipment. So, a tiller is a trailer on a tractor, designed for the continuous processing of very heavy, heavy and light soils. Even with the help of this mechanism, we can get rid of weeds, mix fertilizers, cultivate rows between orchards and vineyards. The tiller cutter is a shaft to which blades are connected, bent in different directions. The principle of operation is as follows: the shaft rotates around its axis, and the blades intensively loosen the earth.

Specifications

A reliable tiller cutter must meet certain standards:

1. Working depth on plowed fields should not exceed 12 cm.
2. Working depth in unplowed fields should correspond to 18 cm.
3. The degree of soil crushing is not less than 85%.
4. Crushing of weeds - not less than 95%.
5. The cutters must be equipped with a semi-automatic or fast-connecting device.
6. The frequency of the milling drum should be able to vary.
7. Knives on the milling drum must necessarily be made of steel grade, set by Gost.
8. Fasteners must be covered with an anti-corrosion alloy.
9. Welding seams should not have shells and cracks.
10. Mills must have safety devices in the event of an emergency reset.
11. The joints and seals should not leak oil.
12. The design of the tillage cutters must be safe and fully consistent with the Guest.

Mills for MTZ and t-25

Factories that produce agricultural equipment offer a huge selection of products. And, of course, the cutter should be chosen specially for the tractor to which it will be connected. The tiller for MTW has the following technical characteristics: working width of the drum - 2.1 meters, 60 knives, plowing depth up to twenty centimeters. The cost of such a mill is about one hundred thousand rubles. Still very popular among farmers is a soil tiller for t-25. This cutter is designed for loosening the soil without rotation of the seams, the height of the cutter is 80 cm, the width is 180 cm, and the length is 100 cm. The depth of plowing is up to 30 cm. Weight is about 300 kilograms. The price is about eighty thousand rubles. A wide choice is offered by online stores, which directly cooperate with the manufacturer.