Thermostat: how to install on the radiator?

If you are interested in the question of what a thermoregulator is, how to install this device, you also need to know before purchase.

Intended use of the device

Thermoregulatory equipment is designed to influence the indoor climate, while owners of residential apartments or homes can set the most appropriate range of night and daytime air temperatures. In addition to maintaining the temperature balance in the living quarters, with the help of a thermostat designed for heating, it is possible to optimize the costs of paying for housing and communal services.

Many owners of apartment buildings in winter are forced to keep open the window, trying to escape heat radiators. In this situation, you can put up with the situation, if the calculations for heating are made according to specifications. If heat meters are installed in the house or apartment, the inconveniences described above, while heating the street, are not profitable for the owners. That is why many consumers today buy a thermostat. How to install it, it is important to find out before the time of purchase.

In which room is it necessary to install a thermostat

The rest in the installation of these devices require rooms in which the temperature values during the day are significantly changed. In this case we are talking about the kitchen, as well as rooms that are oriented to the sunny side. It is important to adjust the temperature level in the bedrooms, as a full sleep can be provided only at a temperature of 18-19 degrees.

Advantages of temperature controllers

If you are thinking about how to properly install the thermostat on a boiler, then the same technology as described in the article can be used for this. In addition to installing independently, you can enjoy the additional benefits of this equipment. Among them, one can distinguish a modern and ergonomic design of the device, which will fit into any interior. This unit is as easy to operate and convenient as possible. If the temperature inside the building rises due to the operation of electrical appliances or exposure to sunlight, the sensor will detect these changes, reducing the heating level of the system.

Places for installing the thermostat

If you decide to purchase a thermostat, how to install this equipment, it is important to study even before you visit the store. As the most suitable place for placing this element is the heater, or rather, the battery. This condition is true only in the case when the radiator is not closed with curtains, interior items or grilles for decorating space. If this rule is violated, this may cause an inadequate evaluation of the room temperature. This rule can be bypassed using a thermostatic element provided with a remote sensor. The latter is located under the valve in 2-8 meters. In this case, the temperature level will be monitored at the sensor location.

If you decide to use the thermostat, how to install this element, you can learn from this article. In addition to the above conditions, the temperature regulator for radiators can be installed on a horizontal pipeline zone, some distance from the entry point into the heater. If the installation of the element was carried out in accordance with the recommendations and all rules and building codes were observed in the process, the temperature can be adjusted in the range of 5 to 30 degrees. The step is one degree. Some models allow you to change the temperature range in other ranges, so before you purchase this information is recommended to clarify.

Installation technology

If you are thinking about how to properly install the thermostat, it is important to familiarize yourself with the order of installation. To perform such work, it is necessary first to disconnect the feeding riser. After all the water is drained from the heating system, only then the master can start the installation work. They should be made in the following order. At the first stage horizontal piping is cut off at some distance from the batteries. The pipeline, which has been cut off, is disconnected, as well as the crane, if one was installed earlier. You will need to disconnect the shanks with the nuts from the thermostatic valve and the stopcock. They will need to be wrapped in a radiator cap. The next step is to assemble the piping and mount the elements to the chosen location. After that, the strapping is connected to the horizontal pipes of the pipeline that run from the riser system.

Methods of work

If you have set yourself the task of installing a thermostat on a boiler, you should know that the heating systems can be divided into two-pipe and one-pipe systems. In the latter variant, when connecting the thermostat, it is necessary to change the connection circuit of the batteries by mounting the jumper. The latter connects the return and straight lines of the device. This jumper pipe is called a bypass, it allows the coolant to run when the radiator is blocked by a thermostatic device. When implementing such a connection scheme, it is convenient to remove the device, shutting off the valves in advance. If you do not know how to install the thermostat on a battery, you should be aware that in a two-pipe system, the control is by the method of flowing the coolant into the battery, which is done by means of a temperature regulator that is installed on the upper connection.

Carry out the adjustment of the thermostat

After you decide where to install the thermostat, and also made all the installation work, you need to think about the correct setting of the element. To do this, the heat leakage from the room is reduced to a minimum. You can do this by tightly locking all the doors and windows. The thermometer should be located in a place where a constant temperature is maintained. After this, you will need to fully open the valve, turning the head of the device until the stop is to the left. In this position, the battery will provide the highest level of heat dissipation, after which the air in the room will begin to heat up. As soon as the indicator of the thermometer increases by six degrees from the original level, the valve can be closed. To do this, the head rotates to the right until it stops. The air temperature after these manipulations will slowly decrease. Once it reaches the required value, you can slowly start to open the valve. After you hear a water noise in the device and feel the heating of the valve body, the rotation can be stopped, remembering the last position.

On this, it can be assumed that the valve adjustment has been completed. If you still do not know how to install a thermostat on a radiator, it's best to take the help of specialists. Only they will help to make the given works as correctly and safely as possible.

Additional recommendations for installation work

Specialists give advice on how to properly install the thermostat on the battery. When you visit the store, you should not give preference to the cheapest models. It is recommended to install in front of the described element of the shut-off valve - only it will ensure a fairly rapid shutdown of the coolant. The unit must be installed perpendicular to the battery. The device is mounted on the supply pipe using a technology that involves the location of the thermal head parallel to the floor surface. Thus, this part should be placed horizontally. To perform these manipulations, you will only need a swivel key and an existing instruction.

Conclusion

Professionals are well aware of the requirements that are made by the manufacturers of the device described. If you correctly install and adjust the thermostat, you can always enjoy a comfortable level of temperature inside the premises, this will certainly save the heat consumption, which will positively affect the budget of the family. That is why modern consumers increasingly began to purchase and install in their apartments described equipment, because it assumes only a positive effect of use. There are no negative features for this equipment. And the cost will pay off in a few months after the start of the thermostat, which you can easily install yourself.