The tank for a bath from a stainless steel - the basic element of the equipment

Needless to say, it is rare in what country house, cottage or dacha there is no bath. It is very convenient and, most importantly, useful for health. And what kind of bath without hot water? The main element in equipping this room is a tank for a stainless steel bath. The use of stainless steel is due to certain advantages:

- the steel is not corroded, therefore, the water in the tank will be clean, rust will not form. Welds are welded with argon;

- stainless steel is not exposed to harmful effects of high temperature and high humidity in the room during long-term operation.

Usually a tank for a stainless steel bath is made of such steel grades - 08X17, 12X18H10. They have increased heat resistance and high resistance to deformation under the influence of high temperature.

There are several types of tanks, depending on the method of heating the liquid:

- water is heated by the oven;

- heating it with a thief built into the tank.

In order to evenly heat the water in the tank and keep the heat high for a long time, it matters what thickness the metal has for the stainless steel bath. When the liquid is heated by the furnace, the thickness of the metal is taken more than when heated with a tenon. This is explained by the effect on the boiler of a higher temperature. At the same time, the increase in the thickness of the metal affects the mass of the tank, and hence its cost.

On how many people at the same time will be soared and on the way of heating water, it depends on what size a tank for a stainless steel bath is needed. For one person, a capacity of up to 50 liters is sufficient.

Industry produces tanks, which are attached to the smoke pipe from the furnace. The remaining chimney is installed on the tank. Smoke as it passes through the pipe heats its walls, which transmit their heat to the water. Through the upper opening in the tank water is poured, draining is performed through the drain fitting. Also hinged tanks are produced which are attached directly to the furnace wall and heated by it. In this case, the crane is inconvenient, at the very bottom.

To heat the room for several hours in the sauna or sauna electric heaters are used. In this case, there is no need to stock up on firewood. Everyone will make an electric heater for saunas. The heaters heat stones that are laid on them.

The electric heater is usually made in a rectangular shape, with a heating element inside. Its main purpose is to create hot, dry air in a steam room. On the body of the furnace on three sides to improve the heat transfer make the blinds. The amount of stones depends on how quickly the steam room warms up. If there are a lot of stones, warming up will take longer, but the steam will turn out to be more "soft and lush".

Recently, the furnaces made of cast iron have become widespread. They are more durable and resistant to environmental influences.
A cast-iron oven for a bath has some advantages over other heating devices:

- simple installation in the room;

It does not need liner, which saves both time and money;

- it can easily be moved to any place.

A small-capacity cast-iron oven can heat a large area. In addition, it has versatility - it heats both water and the steam room itself. The material is high-quality heat-resistant cast iron. The peculiarity of such furnaces is the regulation of the furnace process. Up to eight hours, a slow burning process in a metal furnace can occur.