Feeder for the tits with their own hands: drawings, photo

The feeding trough does not lose its relevance in the spring. Hanging the device near your house, you can see daily how the birds jumping in it, picking up food. Small live lumps serve as harbingers of warm days and bring joy with their tweet.

Where to get the feeder?

You can buy a factory product, and you can make feeders for tits with their own hands. They are suitable for juice boxes, plastic bottles, glass jars and many other materials. Here, as they say, everything depends on your imagination.

With special trepidation to ptaham are children. Therefore, to make feeders for tits with their own hands Together with children is doubly interesting.

Depending on how old the child is, you can choose more simple ways of making a trough for the titmice. For example, the material can serve as a cardboard or a plastic bottle or a can.

Feeders for tits, photos of which are presented in this article, are of different types.

But here there are some nuances. Any feeder should be made so that it is not ruined by sparrows.

Basic rules for manufacturing

• The feeder for tits should be equipped with a lid, otherwise the food will get wet under the rain or snow and deteriorate.
• The hole must be of a normal width so that the bird can penetrate inside and out without difficulty.

If you want to make a feeding trough for your tits with your own hands with the expectation that it will last a long time, it is better to resort to making a house made of wood.

From a plastic bottle

How to make a tindermill for tits from a plastic bottle?

It should be noted that this is the most common material of manufacture. The process does not take much time. A trough from a plastic bottle can be simple or self-filling.

To make the first option, take a bottle of plastic of any size. In the bottle, cut the hole, and attach a rope to the plug or neck.

Self-filling trough for tits with their own hands is made of two plastic bottles, which have the same diameter. In the first bottle, cut the hole and remove its upper part. The second bottle must be filled with food and placed in the first mouth down. The pouring of the food takes place automatically in accordance with the principle of connecting vessels.

The feeding trough for the tits from the plastic bottle in place of the cuts must be free from sharp jags. In case of their occurrence, it is advised to paste the edges with adhesive tape, with an insulation tape. You can scorch the edge of plastic with fire.

The plastic feeder is suspended from the bottle by the rope or on the hook by means of a rigid fixation. To prevent birds from attacking cats, it is better to hang it above the ground. For the convenience of birds in the bottle, it is advisable to make a through-hole and insert a branch that will replace the perch.

Making a feeder from a plastic bottle and spoons made of wood

Often a trough feeder is made from solid plastic bottles with spoons made of wood.

This design is not convenient and requires a slight inclination of the feeding spoon. For this purpose holes are made in the bottle. One of them is located above the other. The feed level should be above the spoon level.

A can-basin made of metal

How to make a trough for the tits with his own hands from a tin can?

To make a similar model, a can of coffee or cocoa, on which a plastic cover is screwed, is suitable. The plastic cover should be cut off and glued to the can, so that the grain does not spill out of it.

The bottom of the can is removed by building a plastic barrier (from the remains of the lid) from the back of the can. The rope should be passed through the resulting cylinder or through the hole that is drilled at the bottom.

Feeding trough for the tits from a packet of juice or milk

Such packages serve as an excellent material for the production of a tinderbox. The package is covered with a coating that is resistant to moisture. Such boxes are easily cut. The feeder for tits from a sachet is made in the same way as a device made of a plastic bottle. To this end, you should mark the hole with a marker and cut it with a stationery or kitchen knife.

By the same principle, a feeder made of cardboard is made. Here, individual parts are cut and glued together. Such a device is not resistant to moisture. Therefore, the feeder is advised to be placed under a canopy. Can be sealed with tape or other protective material.

Feeder for tits made of wood

Houses and feeders for tits with their own hands made of wood are distinguished by their durability and reliability. This is the most optimal option. They can be produced independently by anyone who owns tools such as a hammer and saw.

The basis of the structures are wooden boards, trimming lining, pieces of plywood and other materials that remain after the repair. Let's proceed to the description of technology.

Feeder for tits with their own hands, the drawings and dimensions of which are scheduled in advance, is made in a certain sequence.

Stages of manufacture

• The basis of the bottom and flooring is a plywood sheet. For this purpose, three parts are cut out: the size of the bottom is 300 * 240 * 3 mm, the roofs - 280 * 212 * 3 mm. From the wooden rails, you need to cut out the racks, crossbar and other elements. The details are polished.
• By means of nails and a hammer, four corner posts are attached to the bottom.
• Bracers are fixed. They are attached to the bottom and pillars at the corners.
• From above on the posts are placed cross-bars and nailed.
• To the crossbeams are attached roof rails and connecting rails.
• Then the roofing is mounted.
• The feeder is decorated and varnished.

The result of the work done is a beautiful convenient feeder for the titmice. It will last a long time. To protect from moisture on the roof, it is recommended to fill pieces of linoleum, waterproofing film or other moisture resistant material.

In general, the feeders can vary in their configuration. People who know the techniques of woodcarving and painting can bring artistic elements.

The construction of the trough is a very interesting activity, in which the performer can act as an architect and designer and demonstrate his creative skills.

Bird feeders for factory production

Such products are presented in two types: open and closed type, on a pedestal leg or suspension with the usual fastening on the back wall. Each street feeder factory production is equipped with a roof that does not allow the feed to deteriorate in bad weather, and convenient access allows you to observe the birds. All models are exclusive design and will be an excellent decoration of the garden or the suburban area.

Sitting under the roof, feathered comfortably peck the seeds. The offered ready-made houses can become a wonderful gift for bird lovers.

What to feed the tits?

Tits mostly inhabit the forest, but with the onset of cold weather, it becomes increasingly difficult for them to get fat. Because of hunger, a small number of birds survive to spring. These birds are very necessary for gardens and orchards, as they eat harmful insects, so it is our duty to protect them from starvation. Синички have understood, that people care of them, therefore in the winter they can be seen near houses.

The bird feeder should contain not only the seeds of sunflower, melon, pumpkin, watermelon, cucumber, but also peanut and pine nuts. Also in the diet should include meat. In the warm season, birds feed on insects, especially butterflies and caterpillars. On frosty days, unsalted fat, chicken or rabbit meat, butter, grated cheese will perfectly suit as additional feeding. Salt and spices to birds can not be added.

Many feed the birds with small pieces of white bread. Birds eat it with great pleasure. Do not give the little blue bread a fresh white bread. In particular, for feeding is not like black bread. From it, fever can cause upset stomach, which will lead to imminent death.

Warning

If you began to feed the titmouse in winter, then this business can not be suspended. Feathers get used to a certain feeding place and every year they fly there for the winter. If you sharply stop feeding, birds may even die.

House for tits with their own hands

How to build a house for tits? It is done in the same way as a birdhouse. The board is taken with a thickness of 20 cm. On the one hand, it should be unpolished. The main difference is the diameter of the tap. For titmouses it is suitable 35 mm. The inner and outer walls are made rough with notches. This gives the chicks the opportunity to get out of the house without difficulty.

Houses for titmouses are suspended in the autumn months. On the site of 10 hectare posted 4 sink. The distance between the buildings should be about 20 m. Sanctions are hung on houses and trees. Mounted house with a slope toward the tap. The summer should be located on the leeward side.