Setting up plastic windows for the winter. Adjustment by own hands

Installing plastic windows is often not enough, because they also require proper maintenance. In the event of improper operation, problems may arise, and in this case the windows will not protect the premises from wind, cold and noise. More often than not, it is necessary to pay attention to the named problem when it is required to change the regime. To do this, you need to set up.

Why to regulate metal-plastic windows?

Everyone knows that plastic windows have two main modes: summer and winter, each of which fulfills its role. Window manufacturers usually indicate in their recommendations how to properly operate and adjust the metal-plastic construction. With confidence, it can be argued that this avoids a lot of problems.

We will tell you about how to do this correctly in the article. It is important to remember that all the recommendations will help to properly adjust the metal-plastic construction and keep the heat in your home.

Why do I need to adjust the windows to the "summer-winter" mode?

Few people know how to customize the window, so some people prefer to contact specialists for help. But in the configuration of the windows there is nothing complicated, and if you carefully study all the recommendations, then you can carry out all the work on the regulation of the design yourself.

Initially, the adjustment is made when the windows are only installed. This greatly simplifies operation, but, unfortunately, does not allow you to select the desired mode in the future. For example, if windows were installed in summer, then in winter it is necessary to reconfigure them, and vice versa.

Experts say that it is simply impossible to do without adjustment, since it is a kind of repair, which allows to determine the preparation of the structure for operation in the cold season. Adjustment of plastic windows for the winter allows to improve their tightness, does not allow drafts to penetrate into the room. Thanks to it, the microclimate in the room will always remain at a normal level.

If the adjustment is not carried out correctly, there will always be a high humidity in the room, and sometimes even hoarfrost on the windows. If the structure is operated for a long time, then the tightness becomes minimal, and there are many reasons for this.

Often the adjustment of plastic windows is required when a breakdown occurs. To avoid this, they need to be constantly regulated as soon as the seasons change. If you leave the windows on the summer mode, the cold air masses can freely penetrate into the room, which will naturally affect both the heat level and the energy consumption for its conservation. Installing windows for the winter period in the desired mode, you can keep the heat in the room.

When is it necessary to adjust the window for the winter period?

Setting up plastic windows "winter-summer" may be required in several cases, where it is worth stopping your attention in more detail:

1. The windows should be adjusted immediately after the design has been installed.
2. Even specialists can sometimes make mistakes during installation, such violations entail deviations, cracks begin to form. In this case, a full repair and adjustment of plastic windows is required.
3. Every two years, a technical inspection should be carried out. If the frame is operated without such checks, then some deviations may be detected.
4. The window can fail if it was installed in a new building or in an old house, since the building can sink. It is not difficult to notice this - after adjusting the windows for the winter period, cold air will still penetrate into such a room. In this situation, it is important to take into account the possibility of a building sagging, and problems can be avoided.

Naturally, this is not all the reasons for which it may be necessary to adjust the window for the winter period, but they are the main ones that a consumer can face.

The instruction on regulation of a window for the winter period

Setting up plastic windows for the winter with their own hands has always remained the most urgent issue. To attract professionals to work, you need to spend a pretty decent amount of money, but in order to perform all the work yourself, it is enough to follow the recommendations carefully.

The design for the winter should be prepared in advance, otherwise the owner may face major problems during operation. The fact is that fixing anything during a drop in temperatures will be very difficult.

First of all, we must pay attention to the accessories. Adjusting the accessories of plastic windows allows you to make the windows begin to fit snugly against the frame. If the windows have not been adjusted correctly before, you can notice strong drafts in the room.

Adjusting the window takes not so much time. In order to carry out all the work, you will need to use a hexagonal key, which is available to almost every owner in the house. At the end of one leaf there is an element that serves for locking, in another way it can still be called a clamp. It is on a platform of rectangular shape, but can be moved up and down. It is very important that this clamp is moved in the direction of the street, when there is a strong cooling, just this will provide the owner with a good tightness.

To properly tighten the clamp, use the Allen key. Twist it counter-clockwise, applying a small amount of effort. Due to this, he can turn to the correct position and he will fix himself. As soon as all the manipulations are carried out, it will be possible to say with confidence that the work has been done at the proper level, and now it will be warm and comfortable to stay in the room even in the coldest of cold.

How to adjust different types of fittings for the winter?

Each fittings manufacturer fights for quality in its own way, and this also affects the adjustment of the plastic window. Some developers use a complex structure of construction, and some - simplified. Consider all types of accessories and how it can be customized:

1. The company Roto has round heads in their constructions, why the owner may have a problem with the keys, since it will not be possible to find the suitable one. Here you have to torment yourself and look for the key with a large cross.
2. The company Maco made sure that the heads were the most convenient - the manufacturers made them oval in shape, and they can be screwed with ordinary pliers.
3. The most reliable is the accessories of the company TORX. To switch to the winter period, you will need to use a hex key.

Some developers of plastic windows use in their system special protection, in which the mechanism can be rotated by 360 degrees, but once the owner does this, the mechanism will return to its place. By the way, it is often not recommended to do this very much, since the mechanism can simply be broken, and then it will be necessary to completely replace it.

It should be noted that the adjustment of plastic windows without specialists requires special attention and patience. As soon as one head is twisted, it is worth checking how tightly the window closes. Typically, the adjustment of one head does not give anything, therefore, gradually twisting the rest, you can check the tightness on all sides and all the doors of the plastic windows.

How to insulate windows in another way

When setting up plastic windows, it is worth paying attention to the condition of the seal. Often the cause of drafts from the cracks is precisely its wear. This seal is made of rubber. If you do not properly look after the material, you will soon see that no window adjustment can save the wearer from entering the room.

To ensure that the sealant does not wear out much, you should use a special silicone grease, which motorists love so much. Thanks to it, the rubber is covered with a special molecular film, which lasts six months.

Over time, the seal can be completely changed, and then the settings of the window will become even easier.

What problems can arise when adjusting windows?

To date, some plastic windows have a complex design. Naturally, setting up plastic windows with your own hands in this case can cause certain difficulties. Such windows often require proper preparation for the winter, so one adjustment in this case is indispensable.

Windows require special attention to themselves, and if they are not translated into summer or winter mode in time, the service life will soon come to naught. It is important to remember that if they will always be in winter mode, then soon they will fail, or rather, the seal will deteriorate. Switching from the winter regime to summer is also beneficial because more fresh air will enter the room.

Some are wondering how to adjust the plastic windows themselves. It should be noted that all manipulations are very simple, so you do not need to seek help from specialists. The most common complications arise when cylindrical eccentrics are used in the fittings. Before you get started, you must first carefully examine all the elements of the window lock and try to adjust the screws. Window manufacturers, as a rule, leave their recommendations, so you can use their tips.

Step-by-step adjustment

When you need to configure windows for plastic, you should follow some recommendations:

1. It is necessary to study carefully the butt end. This part of the window is moving, with cylindrical elements, which when moving go into the window frame and fix the leaf in one position. Among the elements, you can see two strips, which are divided into two semicircles.
2. To move the window to winter mode, it's enough just to turn these strips towards the street. In this case, an extension is obtained, and the window leaf automatically falls into the bar, the frame being pressed harder, and the air can not freely enter the room.
3. You can return windows to summer mode in the same way, but this requires turning the leaf in the opposite direction, more precisely, towards the room.

Innovations in setting the window for the winter period

To date, windows with low-emission glasses are considered innovative . In this case, this term means windows with a triple-glazed double-glazed window - such glasses allow to save heat by 70%. Some believe that the above windows are absolutely not suitable for the summer period, but it is safe to say that they will reflect the energy of the sun.

A plastic valve can be freely installed on plastic windows, then the adjustment of plastic windows with their own hands will become even easier. In this case, without any effort, it can be done so that the air from the street will not enter the room, and, conversely, take care of fresh air in the house becoming larger, providing good ventilation. Correctly using the mechanism, you can achieve the expected results.

Tips for adjusting windows

If you can not adjust the window, you should take care of replacing the seal. After all, when the product is used for a long time, the adjustment of plastic windows can be practically impossible and it only remains to replace the sealant. Over time, it may lose its properties, cracks appear in it, and recommendations for switching to winter mode will not give the expected effect.

Replace the sealant is not difficult, you should buy the right material and make the appropriate manipulations. It is advisable to carry out a replacement not when the house becomes cold. The old seal is removed from the top or bottom corner, as soon as this work is done, it is necessary to process the grooves, or rather clean them of dust and dirt, otherwise the new seal will not be able to lie down as it should. Then a new seal starts to be laid from the upper corner, which is superimposed over the whole width.

It is very important to carefully ensure that it is tightly laid down. Only when all the work is done, it is possible to start fixing a new seal. In no case can the rubber be stretched, since it will then not match the size of the window. Remember that turning eccentrics to the stop is also not recommended, otherwise you will need to replace the seal again. Provided that all recommendations are followed, the adjustment of the window will pass quickly and qualitatively.