Home and familyAccessories

Remedy for mold on walls: useful tips

A means of mold on the walls is sooner or later required for everyone. The moisture in the room is the cause of many unpleasant consequences. Including the formation of fungus or mold. This mischief spoils the appearance of the walls, but most importantly - destructively affects the health and well-being of people living in the house. Asthma, gastrointestinal diseases, breathing problems, allergies - these are far from all the ailments that can arise. This is what motivates us to look for a remedy for mold on the walls.

The reasons for the appearance of the fungus are many. First of all, this moisture, and it can be located in the building partitions - this is a consequence of errors in the laying of foundations. The second reason is the freezing of the walls. Usually a large amount of moisture in the room is a consequence of problems with ventilation. Mold and fungus spread over different surfaces. But if in a case with a brick to remove them it is easier, from a tree they should be cut out and burn out. Before you find a remedy for mold on walls and fungus, it is worth finding out the cause of their appearance and neutralizing it.

Usually mold and fungus are on the plaster layer. And you need to check the degree of its adhesion to the wall. It is enough to tap a specific area. If you hear a thud, then the plaster, as if separated from the wall, can be removed and replaced with a new one. If everything is normal, then usually just use any drug against mold and fungus. It is advisable to moisten the walls with water so that spores do not dissipate throughout the room during the cleaning process. Now a concrete remedy against mold on the walls is applied, always with a spare meter indentation, so as to accurately capture all the nascent layers. Treat the surface with a roller or brush. There are spray cans on the market, but they are good at cleaning small areas. To increase the effectiveness of the product, it must be applied in several layers, each following do after drying the previous one. After treatment, the mold remedy on the walls, together with the fungus, is removed using a metal brush. Do not forget to wear a mask-respirator, glasses for the time of work, the room should be well ventilated.

There are also cases when a mold detergent is unable to solve the problem. Speech about those situations in which the fungus penetrates too deeply, surface treatment does not help. If you have the opportunity to completely replace the affected fragment, produce it.

As an example, there are a number of names of drugs that are used to combat mold and fungus. The most effective are those that contain boron compounds. You can buy and a means of mold on the walls, helping to fight a specific type of fungus. Then it is better to consult a specialist. It will help to determine what kind of fungus you are dealing with. So, here are the drugs that are popular today:

  • The drug "Atlas Mykos" - removes mold, fungus, moss, lichens, is used in high humidity.
  • The drug "Spectrum Fungicide" - a remedy for combating the fungus on different surfaces.
  • The drug "Titan Fungicide" - helps to cope with the mold on the painted walls.

This is not all examples. In any case, it is important to use an integrated approach. Otherwise, the fungus and mold penetrate deep into the walls and destroy them.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.unansea.com. Theme powered by WordPress.