Putty for windows. Manufacture, removal and application

Putty for windows is a very important component in the glazing of wooden frames. If it is poorly applied or completely absent, then no good thermal insulation is worth talking about. In addition, the glass that is loose will be jarring every time the window is opened or closed.

How to make putty for windows

Recipe # 1

To make it, you will need a sediment from the oil and a white or decorative fine cement. If you use a dry construction mix with large granules, then the future putty for windows will be substandard. Both ingredients must be mixed and thoroughly beat to a consistency of thick sour cream.

Recipe # 2

A very simple way. Chalk and flour should be mixed in a 1: 1 ratio. In the resulting dry mixture it is necessary to add water at room temperature and mix everything thoroughly. The result should be a creamy consistency.

Recipe # 3

The putty for windows, obtained by this method, is distinguished by its durability. It is necessary to mix ground chalk and linseed oil in a ratio of 8 to 3.

Recipe # 4

This method makes it possible to get a reusable putty. To make it, you need to mix rosin, melted lard and chalk in the proportions of 2: 1: 10, respectively. From the frame, this putty can be removed with hot water, after which it is suitable for reuse.

Recipe # 5

To begin with, the usual chalk must be ground to a powdery state. Then it should be mixed with linseed oil in a ratio of 4 to 1. The resulting mixture will have a yellowish color. If you want a putty for white windows, then you should use refined linseed oil.

Recipe No.6

Another simple way to make putty. But, unfortunately, it is suitable only for the winter period, as in summer, under the influence of moisture, it will dehydrate. It is good to use as a temporary solution. It is made from chopped chalk and sour cream. After mixing the ingredients, putty should be thoroughly kneaded.

Recipe # 7

This method allows you to get a particularly strong putty. When using it, it is easier to break glass than to wait for it to fall out of the frame. For its production, tar is required, which must be previously cooked for at least two hours on a slow fire. After that, it should be mixed with sown ash and knead until the putty stops sticking to the hands. Then it should be used for the intended purpose, until it has hardened.

Removing old putty

To perform this operation you will need a metal trowel. To simplify the work, the old putty can be heated with a conventional household hairdryer. Then it will soften and will be easier to handle. The blade of the spatula should be inserted into the gap between the putty and the glass, after which by a gentle movement in its direction remove part of the material. If in some areas you can not perform this operation with a spatula, then you can use the chisel. After the glass is removed, the frame can be completely cleaned using sandpaper.

How is putty putty for windows with their own hands

This work should begin with careful mixing of the material. Using a putty knife put the putty in the window frame. Next, you need to insert a window. The finger of the hand should firmly press the putty into the slots along the entire perimeter of the frame from the inside and the outside. After this operation is completed, it is necessary to put more putty on top with a spatula and allow it to dry for a few days.