Primer "Starateli": types, advantages and features of the mixture

Beginning repairs in your home, almost everyone faces different problems. For example: the plaster falls off, wallpaper is peeled off, whitewash is badly taken. The source of all these problems is improper preparation of surfaces. To prevent this, it is necessary to use primer mixes. One of them is the primer "Starateli".

About the manufacturer

The company "Starateli" is located in Lytkarino, Moscow Region. She started her work in 1992. Today the company is known in the construction industry as a manufacturer that produces affordable, high-quality and competitive materials for construction: paints, primers, grouts, impregnations - all that is necessary for repair work. In addition, in the range - dry building mixtures of all kinds: plasters, putties, adhesives, mixtures for bulk floors, as well as primers.

How good and reliable are the primer mixes, what are their features and advantages - about this further.

Types of primer mixes

The enterprise produces several types of primers designed for use during repair or construction. It:

1. Primer universal "Starateli", which can be used to treat walls both inside and outside buildings.
2. Mixture for internal works.
3. "Concrete contact."
4. Primer for surfaces with a strongly porous structure.
5. Primer of deep penetration "Starateli". Characteristics of this type of mixture - the possibility of penetration into the smallest pores, due to which weak and loose bases are well strengthened. In addition, the material is suitable for processing walls made of gypsum, concrete, aerated concrete, plaster, wood and bricks.

The product goes on sale in buckets or cans with a capacity of one to 20 liters already ready for use. Due to this, you can purchase the amount of material that is necessary to perform a specific task.

Specifications

The composition of all kinds of mixtures is almost the same. Primer "Starateli" acrylic consists of:

• Quality acrylic latex;
• Antiseptic agent, reducing the likelihood of mold and fungus;
• Components that do not allow the formation of foam;
• Additives that enhance penetration into the ground base.

All types of primer mixes have a creamy structure, quickly impregnate and strengthen the treated surfaces, dry well (it takes only one hour to dry completely), do not create a film on the surfaces, so that the substrate can "breathe".

And most importantly, to save when working with smooth smooth surfaces, the primer mixture can be diluted with water (1: 1).

For covering 1 square. M of the substrate requires 100 to 200 ml of the mixture, and a deep penetration primer material will be required for 5 sq. M. M from 1 liter. The soil is stored no more than six months at a temperature of 5-30 degrees, so it is not worthwhile to acquire a lot of material in advance.

Features of work

Since the primer "Starateli" is already a ready product, its availability greatly simplifies the process of work. There is it as follows:

1. Prepare the base on which the mixture will be applied. To do this, it must be cleaned of dirt, dust, oils, remove the remnants of old finishing materials, including plasters, paints, using a metal spatula or an ordinary knife. As a result, the surface must be firm, clean and dry.
2. To protect the doors and windows from the ground, they must be tightened with a film. If this is not done, the drops from their surface will be very difficult to remove.
3. When the surfaces dry, you can start working.
4. In a small convenient container, pour the primer solution. Take a brush or roller with a large pile and, after removing a little excess, apply to the prepared surface. If you want to speed up the process, you can use a spray gun.
5. Perform priming work can only be at a plus temperature of +5 to +30 degrees.

Advantages and properties

All primer materials produced by the company are designed for one purpose - to prepare the basis for further processing, but the choice of the type of mixture depends on the surface. What problems can the primer "Starateli" solve?

1. Due to the speed of drying - to speed up further work.
2. Ensure the formation of a smooth and even surface.
3. Provide antiseptic effects, than protect the substrate from the appearance of mold fungi, absorbing liquid, moisture, steam. This property of the material is very important for rooms in which the humidity has a fairly high index.
4. Improve the adhesion of the finishing material to the substrate.
5. Reduce the cost of paint and varnish products.
6. Increase the strength of finishing materials.
7. Improve the strength of porous and loose bases.

Consumer opinion

Today, among the most popular materials is the primer "Starateli". Comments from consumers, including professional builders, confirm that the mixes of this brand are very in demand. This is due to the high quality of the primer, its versatility and practicality. Most often in reviews mentioned indicators such as:

1. High adhesion.
2. Reliability - a few years after surface treatment, defects do not appear on them.
3. After application of the material in wet rooms, there is no mold, although before that it was.
4. The ground has no smell, so you can work with it without even opening the window.
5. The price corresponds to the quality.