Peony from foyamiran: master class

Flowers - this is one of the most beautiful creations of nature, which are glorified in the Bible and were repeatedly sung by poets of all eras. Their only drawback is too short a century. That is why for the decoration of the interior, clothing, accessories and hairstyles often use artificial buds, boutonniere and bouquets. They are made of paper, fabric, and recently for this purpose, and actively use and fayiran. In the latter case, a rose, a daffodil, an aster, a violet, a lily, a chamomile, or some other garden and field flower usually turns out to be incredibly natural and can become an excellent substitute for a "living" analogue. With a neat design, you can also make a luxurious peony from fameirana pink, white or crimson. It can be like a small bouquet, and a large, lush flower with a lot of petals and bright stamens. It's not so difficult to create, as it may seem. The only thing you need to get a chic bright and absolutely "live" peony from the fameiran - MK with photos and detailed step-by-step instructions.

What is fameamor

This modern ornamental material, also called plastic suede or ethylene vinyl acetate, is a soft sheet of a special foamed product synthesized by chemists. It is very pliable and plastic, easily cut and is capable of slight crushing and stretching. Due to these properties, the foiaran is excellent for making very beautiful flowers, with petals that will look quite like real ones.

To work with this material, in addition to scissors or a special cutter, you will need heating devices such as an iron, an embossing hairdryer and others that allow you to shape the details you want.

After opening the packaging of fomiran, sometimes you can smell unpleasant. However, it should not be intimidated, since this material is absolutely non-toxic and can not cause harm to health.

Peony from Foamiran (MK): materials and tools

To make a flower you will need:

• Foamiran 1 mm thick, dark green, light and dark pink;
• Thick wire (1.5 mm) and thin - for leaves;
• Acrylic colors of yellow, dark green and dark pink colors;
• Tap-band green, or even better, dark green color;
• Sponge and thin brushes;
• Hot-melt gun and manicure scissors with bent or flat tips;
• Piece of foil.

Pattern

First of all, you need to make the necessary number of parts of different types. To do this, you will need a pattern of a peony from the fameirana, shown below. For one flower should be cut:

• 10 parts of type "a" from light pink foyamiran;
• 10 "b" light and 5 - dark pink;
• 10 items "c" from a light pink foamiran;
• On 5 petals of type "d" and "e" of a dark pink shade;
• 3 leaves of dark green foamiran;
• 5 green tea cups of types "k" and "l";
• 6 leaves "m" from the dark green foamiran.

In addition, to prepare a peony from foamiran will need a base in the form of "sun". To make it, from a light pink plastic suede you need to cut a circle, and then turn it into "rays" with sharp ends (part "g").

Peony from Foamiran (master class): toning

Surely everyone noticed that the petals of flowers usually have a heterogeneous color. This is especially true for pions. To give them the most natural appearance, you need to make the toning of the petals on both sides. To do this, using a foam brush or a small piece of sponge, you need to apply a pink paint on the petals so that they become darker at the edges than at the base. When all the details have been processed, they need to be left to dry out, and to draw the veins themselves with a dark green paint on the leaves and sepals.

Corrugation of petals

The next step that you need to do to get a peony from foamiran is to give the desired shape to pink details. This procedure is called shirring and requires a certain amount of patience. To do this, take each petal type "b" and fold it into an accordion. Then the part should be twisted into a flagellum, gently spread and slightly extend the fingers of the edges of the petals so that they become transparent. Similarly, you need to do with petals like "a". Next, it is necessary to deal with making details of the "d" and "e" type in a concave shape, "pulling" them in turn onto the thumb. As for the petals "c", their upper edge should be corrugated, as indicated above. In this case, the middle part needs to be pulled out, forming a "boat".

Corrugation of leaves

Then proceed to processing details of green color. For their corrugation, each sheet is folded in half, at the top of the leaf stretches the edges, and at the bottom - the middle (along the veins). It also requires simulating lateral veins. For this purpose, the part is folded at an acute angle with small folds, rubbed and rolled with large, index and middle fingers. At the end of the procedure, the tips of the leaves are slightly twisted.

The basis

From the prepared details it is possible to make both a bud of a peony from foamiran, and a blossoming large flower. It all depends on the size of the petals and leaves, and also on their number. To start creating a peony, you need a base that can be made from a large bead with a hole or a piece of foil. In the latter case, a ball is formed with a diameter of about 1, 5 centimeters and makes a hole in it with an awl or spoke. Then it is poured with glue, using a thermo-gun, and insert a thick wire. The same applies if the bead is chosen as the basis. And, finally, the last step is to put a piece of wire on the wire, thread all the "beams" over the bead and color their tips in yellow, so that they simulate the stamens.

Assembling a calyx

When you already have a base and all the necessary details at hand, you should put them together in the required order, so that a peony from the fameirana turns out. The assembly is carried out in the following sequence:

• To the base of the rays-stamens, 10 "a" petals are glued.
• Wait 1-2 minutes for the glue to dry;
• Attach the details of "b", previously folded their accordion at the base. At the same time, first 10 light-colored petals are arranged around the circle, and then 5 dark ones.
• 10 "c" type petals are glued in two layers, in staggered order, and on them the largest "e" pieces in the amount of 5 pieces;
• Form a cup, gluing first 5 small leaves "l", and then between them - 5 more sepals "to".

Assembling leaves, making cuttings

Peony from Foamiran (master class with photo above) is almost ready. It remains to make the leaves. For this, glue is applied to the base of the part at a distance of 1-1.5 cm from the edge, a wire is applied and, by rolling a sheet, glue the edges of the base. When all the leaves appear cuttings, they are fastened two to three between each other with the help of a tape tape.

The final stage of flower formation

With the help of green tapes, the peony stem is formed and twigs with leaves are twisted to it. Then spread and slightly ruffle the petals so that the flower began to look as natural as possible.

Now you know how you can make peonies from fameirana, photos of which can sometimes be taken as images of real flowers. They will decorate an evening dress, a bezel or a festive hairstyle. And if you make several peonies of different colors and sizes, you can collect from them an elegant composition that will become a wonderful gift.