"Izospan AM": instructions and characteristics

Construction is the sphere of human activity that will always exist. It is not surprising that materials and technical devices intended for the erection of buildings are constantly being improved. An important element of any structure is the isolation of structures from the negative influence of the external environment. One of the most high-quality materials of this designation is Izospan AM.

What is the material?

So, this product is a special membrane, which is used to protect building structures and heaters that are subject to wind, moisture, negative temperatures, condensation and even sunlight. Can be used for the treatment of roofs, attics, walls and other parts of the building. And it does not matter, one-story structure or multi-storey.

The material "Izospan AM" has many advantages that make it popular. In addition, it is quite simple to install. Laying the membrane can be in any weather, since it has waterproof qualities.

Features of the product and its technical characteristics

Izospan AM is a very high-quality material. Fortunately, there is no deficit in it for today. As for the manufacture of the membrane, a high-quality polymer material is used for this .

The product consists of a special film, which has a high resistance to environmental influences. A substrate is attached to it, designed to harden and protect the top layer from mechanical damage and rupture.

In general, Izospan AM is a demanded insulation material, which provides a long service of buildings. Now we need to understand what vendors are offering for today.

If you decide to use the material "Izospan AM", the characteristics - this is the first thing you should pay attention to. It is completely made of polypropylene. The material can be used in the temperature range from -60 to +80 degrees. In addition, under direct sunlight, the membrane can be continuously kept for at least three months. The material stretches well, while high strength does not allow it to tear.

Product Advantages

Now we will understand why this insulator is so popular. The material has the following advantages:

1. Economical . The product has a relatively low cost. In addition, it allows you to reliably protect the structure, so that it does not require additional repair for a long time. This allows you to reduce the cost of maintaining the room.
2. Availability . The membrane is not a deficit in the construction market, it can be purchased in almost any building material store.
3. Ecological cleanliness. The material is made from a safe raw material that does not emit toxic substances. When you lay it, you can not be afraid of the occurrence of any allergic reactions.
4. Water resistance, moisture resistance. This property also provides additional protection for the structure (for example, if it is exposed to rain).
5. Resistance to sunlight. Thanks to this, your insulation (or wooden supports) will not crumble. However, do not leave the membrane under direct UV radiation for a long time.
6. Light weight, which makes it possible to apply the material presented in any construction works.
7. Durability. High-quality raw materials are absolutely resistant to rotting, damage by insects and rodents.
8. Mechanical strength, which is provided by a special substrate.

The material "Izospan AM", whose reviews give grounds to talk about the advisability of its use, is really a reliable barrier for the negative impact of the environment.

Scope of the product

How can I use this membrane in construction? This material was widely used. "Isospan AM" is used to protect:

• Insulated roof;
• Bearing elements;
• Walls with external insulation;
• Overlapping multi-storey buildings;
• One-storey residential, industrial and business premises.

Sequence of installation

How is the stacking done if you plan to protect the roof? The sequence of installation in this case is as follows:

1. Rafter system.
2. Steam insulation.
3. Insulation.
4. Counterback.
5. Isosphere AM.
6. Roof.

Now you should consider how exactly this product is mounted.

What tools are needed to work

Before laying "Izospan AM", it is necessary to collect the tools with which you will perform the installation. For example, you might need the following tools:

• Building stapler and staples (for fixing the membrane);
• Scissors or other cutting tools;
• Hammer and nails for attaching counter-rails;
• Self-tapping screws;
• yardstick.

These tools are sufficient for the installation process.

Peculiarities of stacking

It is useful to read the instructions attached to the material. Izospan AM has certain installation features. For example, laying it is always done only on top of the basic insulation material. This ensures effective removal of moisture. Put the membrane red side inside. The fact is that the white layer is more durable and protects the material from negative external influences. It is mounted with horizontal panels. And every new piece must go to the previous one. The size of the overlap from all sides is at least 15 cm.

In order for the presented membrane to hold well, you can attach it with a construction stapler. Additionally you can protect the rafters. At the joints of the film you need to fix antiseptic counter-racks. They fix the membrane. In addition, with the help of these rods, you can organize an air gap between the membrane and the roof (4-5 cm). After fixing it, it is possible to lay a lath on which the roofing material is fixed.

It is desirable that the membrane is stretched. If you will fix the material on the walls, then the overlap should not exceed 10 cm. In principle, it is quite easy to mount the presented product. You can do it yourself.

Helpful Tips

The use of the material is simple enough, but the process should be handled responsibly. There are some tips on laying the membrane:

1. Try to ensure a natural outflow of moisture from the heater. To do this, do not cover the lower edge of the blade.
2. Since the material is sold in large sizes, it will have to be cut. You can do it on the construction site. And spread the material directly on the heater.
3. Try to use this product neatly, despite its strength.
4. Do not use the membrane as a permanent or even temporary roofing. Under direct sunlight it will not last long. And the real roof is more reliable.

Note that the work you will produce at altitude, so all actions need to be done as accurately as possible. You need to take care of your own safety (put on comfortable shoes that will not slip). It is undesirable to work in windy or rainy weather, as this can lead to a drop from a height. For more security, tie yourself to the rafters. That's all the recommendations for laying this material. Good luck with the installation!