How to Skateboard: First Steps for Beginners

If you do not know how to skateboard, but want to learn this, you will have to learn many subtleties of this matter, starting with the correct choice of the board. It should be noted that almost every person can master this kind of sport, regardless of age.

So, to begin with, you should choose the right skateboard. Pay attention to its size (for the first lessons, select a narrow product). Also see if there are side bends on the deck (the board), thanks to which you can make stops and turns, as well as various tricks. On a quality product should be present the lower plastic layer, due to which it is possible to safely slide on the railing. However, this detail is needed by a more experienced sportsman. Before skateboarding, on its surface, glue sandpaper on a self-adhesive basis. Thanks to this, even the slippery outsole will not move out of the board.

Naturally, we must pay attention to the wheels (if their diameter is small, then the maneuverability of the apparatus becomes higher). Also, look at the material for the manufacture of these elements. More rigid wheels give high speed, however their amortization is not so good, as it would be desirable.

So, if you do not yet understand how to ride a skateboard, put on a helmet, knee pads and elbow pads, put the board on a flat surface (preferably asphalt) and just try to stand on it. You need to learn to balance, so as not to fall during the movement. At this stage, try to stand on one and two legs, rearrange them alternately. Choose for yourself the most comfortable position of the body.

Pay attention to the supporting leg, which should be the first. If everything turns out well, you can slowly start moving along one trajectory and work out the stops. Naturally, you will fall, but as without it. Since it is necessary to learn how to skate correctly, you need a little time. Each athlete's first stage occurs in different ways.

To slow down and stop, the supporting leg should be moved to the end of the board and pressed against it. This movement will be a kind of brake, after which the skate will not go so fast. Next, the leg standing behind should be removed and stopped. You can brake and in a different way. To do this, you need to strongly press the back foot on the back edge of the board, so that the front is in the air. It must be manageable. If you feel that you will fall, immediately jump off the board.

Before you skateboard more professionally, you need to learn the twists and turns. To do this, the support leg should be moved to the edge of the board so that its front part is raised at a certain angle. After that, the housing should be turned in the required direction. Naturally, you need to try this trick first on the spot. Do not forget to change position. Also, remember that you need to train the turns in both directions.

After the basic movements will be obtained quite well, you can begin to study other tricks. That's all the main points. We hope that this small master class entitled "Skateboard for beginners: how to ride?" Will help you master this difficult science.