How to master the construction of a bath from a bar with your own hands

So, you decided to build a bath. Perhaps with their own hands. After a long selection of material for the future bath you stopped on a bar. Now it is necessary to understand what kind of pitfalls there may be in this matter, and, in general, what should be started with the construction of the bath from the bar by oneself. The first and most important thing is the choice of a tree. After all, properly selected and prepared wood will last longer and will have good performance characteristics. The tree is best harvested in the winter. At the same time the wood should be "resting" for at least a month before processing. It must be remembered that in the prepared logs there should be no cracks and blue (this is a sign of rotting).

Preparing the foundation

Before you start building a bath from the bar with your own hands, you should prepare the foundation. This will significantly reduce the running time. For the bath two types of foundation are suitable : columnar and tape (one should not forget about waterproofing, which is placed between the socle and the first frame of the log).

Start of construction

So, the tree was chosen, with the foundation determined. It's time to start the construction of the bath from the bar with your own hands and put the first crown. The main rule that must be observed in this case is a flat surface and a larger (than the next) size of the bar. Further, the problem is small: at the ends of the beams do interlocking cuts, then they are laid, aligned and subsequently fastened (to special metal pins or wooden nagels). In this order, all the crowns are laid, except for the last two (they do not need to be fastened, since they will have to be removed when laying the ceiling beams).

Warming and installation of openings for doors and windows

During the laying of the crowns, one should not forget about the interglacial warming. To do this, natural materials are suitable: moss, jute or tow. If the choice is not obvious, then it is better to choose jute - it's easy to work with, and the construction of a bath with your own hands from a bar will be more qualitative. Also there is no need to patch the slots. After the walls of the bath are built, it is possible to install door and window boxes (sawed in a predetermined location).

Preparing for winter

When the construction of the bath from the bar with your own hands is completed, you need to prepare the frame for "wintering" and the period of shrinkage (at least six months). For the frame to winter normally, the upper rows need to lay a series of boards (40-50 mm thick) and put slate or roofing material on them. In this form, the bathhouse is waiting for the winter period and is preparing for the subsequent interior decoration.

Conclusion

This question can be considered exhausted. If you do not want to do everything yourself, you can hire professionals to build a bath. Prices in this case can be very different, and you will have to choose a specific option for you. But if the choice has fallen on an independent solution of this task, it is worthwhile to understand that without the proper level of responsibility, you will most likely not succeed. Good luck in your construction!