How to make feeders for squirrel with your own hands?

Creating a feeder for squirrel with your own hands will be an ideal choice for those people who are not indifferent to naughty furry animals.

Observation of proteins also brings positive emotions to a person. Feeders for protein (their own hands), photos of which you will find on the Internet, have a different design.

Thanks to such structures, rodents can find themselves additional food in the winter. The feeder will allow the squirrel not only not to starve, but will also become an ornament of parks and courtyards.

How does the protein feed in vivo?

The main protein in the diet are the seeds of various trees. Such protein is found in summer as well as in winter. Animals are very fond of sipping seeds of fir, tree, walnut, hazel, beech. The poisons of the rodents are eaten if there is no possibility of satisfying the hunger with another food. Often the population of these animals is directly dependent on the number of coniferous plantations and the level of their yield. In years of poor harvesting, it is almost impossible to see protein in forests and gardens.

The diet of proteins includes not only the seeds and fruits of various plants, but also bird eggs, which the protein takes from the nests devastated by it. There are times when even small chicks serve as food for the squirrel. In addition, the animal can attack another rodent, the size of which is smaller.

Nuts proteins usually feed in winter. They become the main product used in the cold season. Animals carefully hide nuts under the bark of trees, in abandoned hollows or in moss. In the diet, an overwhelming number of nuts are made of cedar and fruits of hazel.

Fungi for protein are of secondary importance. Animals are stocked with mushrooms, hanging them on the branches of trees. The animals also dug out the frozen mushrooms from under the snow. Especially proteins like tubular species of fungi.

In addition to fungi and seeds, the squirrels feed on the flowers of trees and bushes, plant roots, needles, lichens and many other types of plant foods. But such products are not for protein major. They serve as a feeding. In the years of poor harvest animals can eat bark and kidney trees. But with such a diet in protein, fat deposits are deposited in small amounts.

Natural habitats

In conditions of natural habitat, these rodents are found in forests and steppes. Since the second half of the last century, proteins have moved to gardens and city parks. The animal builds its nest in a hollow or nested nest. They are based on rough branches. From the inside, the protein lining its nest with a soft litter from the ragged bark. In the city they can take wooden houses for birds.

Endowed with a lot of ingenuity by nature, the rodent will not migrate to the warmer parts during the cold winter. Zverek understands that people provide him with additional nutrition. The difference between these rodents and others lies in the fact that animals are active during the day.

The life of squirrels in the city is facilitated. People constantly master feeders for squirrels with their own hands and feed the animal. Therefore, it is not difficult to find food for them. Taste preferences of these animals differ. Not every squirrel decides to try a biscuit or corn flakes.

Feeder for squirrel with jar

Many are wondering how to make a feeder for squirrels with their own hands.

It is not very difficult to master a feeding bowl for squirrels with your own hands at home. But still some effort will have to be made.

A trough with a can is mostly used in Western Europe. And this should not be surprising. Such a device has an excellent appearance, and it is very convenient for an animal, since it is easy to take food from it.

The construction of a lodging house helps to achieve that food is obtained only by proteins, and not by large birds that steal food from foreign feeders.

For this method of construction, use the most common glass jar. The transparency of the container will give an opportunity to watch how the squirrel fondles nuts. Only the rodent can get into the bank.

To create this feeder you will need:

• A board made of wood, the length of which is 180 cm;
• Screws;
• A can of glass;
• Ruler;
• saw;
• sandpaper.

In the walls of the tree on the sides should drill holes of this size, so that the body squirrel crawl through them freely. The ideal diameter is 15 cm. In the center of the board a large hole is cut out, into which the neck of the jar will enter. The design is extremely clear and simple.

It happens that the birds nevertheless climb into the jar for the purpose of heating. Therefore, from time to time, you must clean the feeder from the feathers and bird droppings gathered in it. The main thing is that such a feeder brings joy to the squirrel.

The second way

Feeders for proteins with their own hands can be done in a different way. It should be noted that this method is more complicated than the previous one. To make such a feeder you will need natural materials, which are very attractive for animals.

You will need the following tools:

• a hammer;
• A hacksaw for a wooden surface;
• drill;
• Nails and self-tapping screws;
• Screwdriver for screws;
• Board made of wood;
• Bars and mounting shelves;
• Resistant to water.

Drawing of a wooden feeder with the planned sizes

Before you begin to manufacture the product, you should draw a draft. How is the feeding trough made for squirrels? Drawings containing all the parameters of the future product, provide the performer with ease of work. There are lots of options.

The feeder for the squirrel, whose drawing indicates the dimensions of the back wall, roof, side walls and shelves, is more complete (there will not be large gaps, gaps or other defects).

The size of such a trough is selected individually. Approximately should take 30 cm in length and 40 cm in width. The attachment for the feeder should be carefully thought out.

Progress

On the facade, a circle with a diameter of 10 cm is cut out. This will be the entrance to the feeding trough.
The house-feeder for protein should not be made of materials containing toxic substances. Specific smell of the product will frighten off the animals. Work with caution, exposing the material to a thorough check. Take care that the product does not have sharp parts that can severely injure the brisk animal.

The first stage of the work is the transfer of the planned drawing dimensions onto a wooden board (material of manufacture). Cutting boards with maximum accuracy can be done with a hacksaw.

When all parts of the future structure are cut, you should start working on each part separately. All the details are carefully smoked.

The next stage is the fastening of the facade to a small shelf, which was called "balcony". The basis of this shelf is a bar made of wood, which resembles a step. It happens that part of the board is attached to the beam to increase the size of the ledge. The product is attached by means of nails or self-tapping screws. It all depends on the manufacturer's preferences.

Then a shelf is placed on the side. It should be located strictly under the entrance to the house, but with the account that the lower structure is not blocked. Otherwise, the animal just does not get to the bottom of the feeder.

Feeder from a plastic bottle

People have learned to use a plastic bottle for different purposes: from making original jewelry and souvenirs to building small houses for four-legged friends. If you use a large plastic bottle, you can easily make a feeder for protein.

How are feeders made for protein from plastic bottles?

Take a bottle of plastic in volume from 2 to 5 liters. A large hole is cut in the lower part. At the bottom of the bottle is put food. The bottle itself is suspended from a tree in gardens or parks.

A feeder for protein from a plastic bottle is made from the top of the container, which has a conical shape.

The cut out funnel is fastened together with the screwed cap on the plank. The food is placed in the plastic container.

Box-based feeder

How to make a feeder for protein fast? A standardized option is the production of a bird feeder from an ordinary box. But if the feathers are suitable packages from kefir, then for a squirrel box of a larger size.

In the side of the box, an input of sufficient size is cut out. The rope is attached to the top wall. For this purpose, small holes are cut through which the rope is cut through. The feeder can be suspended on a tree.

Wooden pallet

The basis of this feeder is a pallet made of wood with boards and two pieces of plywood. Pieces of plywood are fixed together by means of small nails. They are nailed to the edges of the pallet. The feeder is suspended on a tree or placed on a low post.

Feeder with corn cob

The feeder with the corn cob is very simple in execution. She attracts the protein with corn, which is put on a sharp wooden peg.

The convenience of this feeder is that the birds can not cope with large corn grains, and the food will be given only to the proteins.

What can be offered to animals?

The contents of the feeder are especially important for proteins. It is clear that feeding the rodents with natural food presents a certain difficulty. Therefore, when choosing, be guided by products that fit squirrels to a greater extent.

In winter, animals can be offered dried fruits without sugar and any additives, as well as lard without salt. It has a lot of calories and vitamins. Suitable and dried mushrooms, oat and flaxseed. Rodents can be given and peeled walnuts, sunflower seeds and hazelnuts in the shell. The main thing is that the products do not contain salt, sugar and aromatic additives.

Remember that the most hungry period is the beginning of spring. Squirrel stocks sprout and become unsuitable for consumption. Therefore, stop feeding with a retreat of colds should not be.