How to knit a suture unit?

Everyone knows that the strongest and most reliable knots were invented by sailors on sailing ships. Since childhood, boys dream of becoming them and trying to learn how to knit properly knots. Sailors on modern ships also need this skill, as they have to deal with different ropes and ropes every day. It is often necessary to tie loads, pulls to slings, used to raise hoses for drying, knit cables for mooring, etc.

Mastering the skills of knotting

When learning how to knit knots, you need to go in two parallel ways:

1. Remember the necessary sequence of step-by-step instructions.
2. Recognizing the correct drawing of the finished node. The visual memory is actively involved . If a person sees that as a result, the drawing of the node has turned out to be wrong, he rewrites it.

With the first method of memorization, you need to listen carefully and slowly to the instructor's explanations, remember step-by-step instructions on the poster board or on the Internet. Using the second method of remembering, a person should remember the picture from a textbook or a poster. If he has got this node correctly earlier, then the memory will keep his own experience. It is advisable to use two methods at once, then the result of the effort will not take long to wait.

Clove hitch

Clove hitch is considered to be one of the strongest and most reliable. A suction unit was designed to tie scraps to the bands. Hence its name. The scraps are pieces of pitch rope thick with finger-finger. Of these, do steps that are interwoven across the guy.

However, on the ship it is used when working with beams of hatches for cargo compartments. But its main purpose is to attach ropes and cables to smooth and even objects. For example, anchors, masts, stocks, rods, and a simple log. It can also be used when fastening the end to the mooring line. Only in this case the excavating unit is completed at the end with a loop. It is reliable only if the rope has tension on both sides of the rope. In the sailing fleet a seamen's knot was used to knit the root ends of the Mars-Dripper on the top of the mast.

Step-by-step instruction

There are different ways of tying a suction unit. How to knit it, is shown in the diagram that you see below in the article. The first method is needed in cases where access to one of the ends of the object is open. Another method is used when there is no open access to the object, and it is necessary to update the cable around the whole object. The main advantage of a snubbing knot in the speed of its knitting.

The first method, when the end of the pipe is free, is performed as follows. The rope is thrown over the pipe and crossed from the front so that the right end is on top. Another loop is thrown over the first, but the end of the rope that goes to the left is threaded under the loop. Then the two loops tighten. The outline of this method of knotting a snubbing knot in the photo is presented in this article.

The second method is applied to the object closed on all sides, for example, a ladder step. One end of the rope is thrown over the bar from above so that the ends hang from both sides. The rear end of the rope is raised forward and upward, pulling the rope to the left crosswise. The end is lowered behind the crossbar back and from the back side of the stick goes down. Then the highlight. The end of the rope must be pushed under the made loop. It looks like a pullout knot like this: 2 loops, on the front part crossed obliquely.

Double Node

This node is reliable at constant tension. If there is no such thrust, then he can loose his tongue and untie. If the binding takes place on a slippery object or there is not a large pull, then use a double version of tying. To do this, first a simple knot is knit, at the end one more loop of the loop is made, and also it is passed through the rope. That is, all actions are the same, only the second loop is done twice. Then the node is fixed more firmly on the object.

The responsibility of the sailor

If a seaman is entrusted with something to tie or fix to any of the nodes, he should understand that any mistake in tying can lead to dangerous consequences. From incorrect and unskillful actions, the integrity of the cargo may be endangered.

A poorly fixed load can move sideways, fall, fall into the ocean. If people climb up the mast on a badly bound staircase, a fall from a height can lead to the death of a person. And responsibility will fall on the shoulders of the one who was engaged in knitting. Therefore, you need to train many times in the binding of cables and ropes. If you want to learn to find the right circuit for any node or more complete information easily on the Internet.

Application of this binding

In the Navy, this node is considered one of the most common. They attach the carvings to the cables, the temporary pulls to the lines, they are used when lifting the hoses to dry. Double suction unit is used at the end of the mooring line. They anchor them and the anchor cat. Wherever there is a strong tension on the rope from both sides, this type of knots is used.

Often apply such binding and in work on land. In the theater, the curtain falls and rises on the beams reinforced with such knots. The ejection node was also used in mountaineering. Those who like to conquer mountain peaks are called the stirrup, since they use them to support their feet or to attach ropes to the terrain. Than it is good and convenient, so it's easy to unleash. Also, when falling into a crack, it is easy to tie it with one hand.

Knitting of brooms for a bath

Russian sailors liked to get sucked after all the tests in the bath. And, of course, they transferred their experience of knitting ropes and the favorite attribute of the Russian bath - a birch broom. When knitting brooms, you must follow several rules, and then the product may crumble when the branches dry.

The rope must be cotton or hemp, in case of emergency, a twine or natural cord. To tie up it is necessary very densely, tightly pulling a rope. It is better to use a blowing unit for a broom, since when it dries it is easy to tighten it more tightly. This is an important point, brooms can crumble if mating is another.

Weaving macrame patterns

Knitting knits are the art of weaving different patterns and household items from ropes. Masters weave bags, pots, belts, wall paintings with animals and birds. Also weave three-dimensional figures, vases, caskets. Massage mats and seat covers in cars will improve the overall condition of the driver, spending a lot of time behind the wheel. Curtains and bedspreads for armchairs and a sofa will decorate the interior of any house. I found an ejection unit and used it to create beautiful products. In macrame it is called pioneer or beaded.

It is also used in attaching the part to a ring or a stick, and in the material of the weaving itself. The canvas in this technique has a small bubbly structure. Looks like a knot on the reps, if you look at it from the wrong side of the product. The pattern turns bumpy, like a bead. Hence its name. The pioneer knot is used for the same plaiting as the reed knot. To create a beautiful texture of the thread pattern, you can weave from right to left, and the next, vice versa, from left to right. Then the bumps will be as if inclined one to the other.

The described node is also popular with fishermen. They are also considered to be great craftsmen in knitting all sorts of complex knots. Did not pass attention and vyblenochny.