How to build an embroidery machine for your own hands: the features of the process

If you like to do needlework, then you just need to build an embroidery machine with your own hands. It is not difficult to do this. As for the material, here everything depends on your capabilities. You can buy plastic pipes or wooden slats for work .

Advantages of the presented construction

It should be noted that the embroidery machine made by this manual with its own hands has many positive qualities. This, for example, is such as:

• Simplicity of design;
• Low cost of the device;
• The possibility of selecting the dimensions of the machine (height and width);
• The account of all needs of the needlewoman;
• Light weight;
• strength.

During construction of the presented structure, you independently determine the size of the fabric the frame should be designed for, with which it should be fastened. If necessary, you can equip your machine with additional lighting. In addition, you can easily make a device of a cushion or hand type.

What materials are needed for the job?

In order to make an embroidery machine with your own hands, you need to first pick up all the necessary tools and materials. You will need:

• drill;
• A grinder or a jigsaw (for cutting racks or pipes);
• Fasteners (bolts or screws);
• Wooden slats or pipes (in this case also it is necessary to get fittings and locks);
• Rubber pads on the legs (if the design will be installed on the floor).

In principle, these materials are enough to make a machine for embroidering a cross.

Construction instruction

Let's consider the basic stages of manufacturing the presented product, regardless of the material selected. It is after this that you need to start making an embroidery machine with your own hands.

1. First, we begin to make a rack, on which the frame will be located. This requires 6 wooden racks, 2 of which must be short, and the rest - a little longer. They must be assembled into a single structure. It should be fastened with bolts or self-tapping screws, but it must be done so that the supports are firm and strong. If you are going to assemble the embroidery machine with your own hands from the pipes, the principle of action is the same. Just to connect the elements you need fittings and clamps.
2. Now you need to make a frame on which the fabric will be fixed. To do this, you need to connect 4 racks. Their length depends on the size of the frame itself. Install it on a special rocker attached to the legs. Please note that the frame should be sliding so that you can easily change its size, based on the dimensions of the embroidery.
3. To build a sliding bar, it is necessary to take a rail with through slots. In this case, there should be a margin of about 2 cm from the edges. Small wooden elements are inserted in the slots, and one more plank is nailed to them. This way you can enlarge or reduce the frame.
4. Now attach the prepared part to the legs. To do this, screw in the bolts in the center of the side rails - so you can rotate the frame up or down. At the edges of this element, you need to attach the latches, which will hold it in a certain position.

In principle, now you know how to make an embroidery machine. This instruction shows the main course of work. The construction of additional objects, as well as the construction of the product itself, you choose yourself. Naturally, before starting any action, you need to draw a machine tool on paper and make all the necessary calculations.