How to adjust the plastic balcony doors yourself?

Over the past few years there has been a sharp increase in demand for plastic windows and balcony doors. Such popularity is explained not only by the simplicity and convenience of operation, but also by the absence of the need for periodic repainting of the frame. However, over time, the door mechanism, like any other mobile structure, begins to loosen up. Therefore, before each person who installed such products, sooner or later the question arises as to how to regulate the plastic doors of the balcony.

Types of malfunctions

Noticing any deviations, it is not necessary to postpone the solution of the problem for later. Before adjusting the plastic balcony doors yourself, you need to determine the malfunctions in their operation. One of the most common problems is the sagging of the module. The reason that the closing door clings to the plastic threshold can be an excessively heavy weight of the structure, so that it begins to shift downward. In addition, frequent opening of the balcony may result in the kneading and loosening of the handle. This problem is easily corrected by correct adjustment of the fittings.

Sometimes during operation the door begins to touch the middle of the frame. The reason for this deviation lies in the displacement of the leaf under the influence of sharp temperature fluctuations and other factors.

Due to loose fit of the sash to the frame, the sealant ceases to cope with its functions, and cold air flows into the apartment. Those who are interested in how to adjust the plastic doors of the balcony, in order not to blow, it should be understood that this problem is eliminated by adjusting the locking parts of the mechanism.

If the warranty period has not yet expired, you need to call the service representative of the company that installed the module. Otherwise, you can use the services of a master.

How to check the tightness of the leaf clamping?

Thanks to this knowledge, the consumer will be able not only to monitor the quality of the work of the masters, but also to independently identify the problems that arise during the operation of the structure. If a strong airflow is drawn from the balcony door, this can only mean that the mechanism needs adjustment. To check the tightness of the clamping of the leaf, it is enough to do some simple manipulations.

To do this, you need to take an unclean piece of paper and lay it between the box and the frame. After that, you need to close the door tightly and pull the edge of the sheet to yourself. In the process of pulling out paper, you should pay attention to the efforts expended. If the sheet is taken out easily, then everything is in order. If on some of the tested sites you had to apply some effort, then you need to adjust the density of the clamping of the leaf.

How to adjust the plastic balcony doors when sagging?

Noticing that during the closing process, the lower part of the flap touches the threshold, it is necessary to perform several simple manipulations. First of all, you need to open the door. With the help of a special hexagonal wrench, you must turn the screw, which is located near the top hinge from the end of the leaf. Usually, to solve the problem, just a couple of revolutions along the clockwise direction.

After that, loosen the upper screws from the plastic decorative plugs and turn them clockwise. At the final stage, you should check the quality of the work performed and, if necessary, repeat the procedure.

How to adjust the loose handles?

Any, even the most high-quality hardware will eventually fail, requiring correction. You can do this yourself, without waiting for the arrival of a specialist. First of all, slowly turn the plastic cover at an angle of 90 degrees. Then it is necessary to find the fixing screws hidden under it and carefully tighten them. The lock fittings of a tightly turning handle are smeared with tools that do not contain tar or acids. To remove a broken and replaceable handle, remove all screws and attach the new part.

How to adjust the plastic balcony doors themselves when they seize in the middle?

Over time, many owners of modern modules notice that the leaf begins to cling to the middle part of the frame. To solve this problem, you need to perform several simple operations.

Before adjusting the plastic doors of the Rehau balcony or any other, it is necessary to push the leaf closer to the lower loop by turning the adjusting screw. This can be done with a special key. Then you need to check how much freer the shutter was closing. In case of incomplete elimination of the problem, it is recommended to adjust the upper loop as well. This is done by analogy with the bottom one.

Correction of the fit of the leaf

Before adjusting the plastic balcony doors ("Century", for example), it is necessary to find the locking elements located on the shutter. To turn eccentrics it is desirable to use a key or pliers. Having corrected the locking mechanism, it is recommended to check and adjust the counter plates.

Regardless of the type of malfunction, it is advisable to adjust the clamp at least twice a year. Experts recommend doing this in the fall and spring. Those who are interested in how to regulate the plastic balcony doors in the winter, you can advise before the onset of colds to strengthen the pressure of the leaf. This will significantly improve the thermal insulation of the room. In summer, in order to save the sealant and improve the ventilation of the apartment, it is desirable to reduce the clamping degree.

How to avoid further problems?

Like in any other competitive market, there are periodically there are unscrupulous producers. They offer low-quality products made from low-grade materials. Such products are much cheaper, but very quickly fail. Therefore, in order not to think about how to regulate plastic balcony doors, you need to order modules only in well-known and time-tested companies.

When choosing a product, you need to make sure that all available mechanisms are suitable for plastic balcony doors. Qualitative modern hardware sets can easily withstand the load of about 100-130 kilograms.

The design should be additionally equipped with a special compensator, which does not allow the sagging of the door under the weight of its own weight. Especially microlifts are needed in double-glazed double-glazed windows, which differ in impressive dimensions.

To prevent seizure of the door and the sagging of the leaflets, the modules are equipped with a special additional tire supporting the heavy construction.