How to adjust the plastic window so that it does not blow? Self-adjusting plastic window

Window systems from polyvinylchloride are famous for high energy saving and reliability of mechanisms. The function of warming often becomes a key in the choice of such structures. Correctly selected for a particular opening a set in combination with a set of high-tech accessories will provide thermal comfort in winter and in summer. But for this it is necessary to correctly approach the configuration of profiles. Each season, it is very wasteful to apply to the master, so the question arises as to how to adjust the plastic window so as not to blow, while maintaining the full functionality of the design.

How to choose the right system?

To eliminate a lot of problems with the subsequent use of windows will help initially the right choice of PVC construction. For this, the following points should be considered:

• The design parameters (profile model, number and size of the chambers);
• Characteristics of the insulating glass unit;
• Number of leaflets;
• The composition of the accessories;
• Additional components (mesh, window sill, corners, ebb).

Each of these options, in one way or another, affects the way windows are adjusted. Moreover, even without adjusting the system, the system assumes a certain level of heat savings. It is logical that the cost of plastic windows in the expanded configuration increases - depending on the brand and the area of the glazing, it can be from 15 to 30 thousand rubles. Of course, there are also designs from 40 thousand, but these are already premium models for exclusive design. Anyway, "full stuffing" does not always affect the function of warming, so the main way to achieve an optimal microclimate is still the adjustment.

When does it become necessary to adjust?

There are several factors that entail the need to configure windows. This can be natural and technically justified causes, as well as the occurrence of breakage, which affects the integrity.

Common problems of the second kind include a disruption in the work of the flaps, which do not fit correctly with the frame. As a result, a gap is formed through which cold air penetrates. Many in such cases begin to look for ways to adjust the plastic window so that it does not blow, but the usual adjustment of the position of eccentrics in such situations is not enough.

Equally common is the erasure of seals. Especially those that are made from poor-quality materials or have been improperly integrated into the system. Wear of seals leads to drafts, which causes the need for their replacement.

There are also more serious problems. For example, the draft of the building leads to a distortion of the entire structure. It is impossible to solve such problems without the help of specialists. The remaining problems are solved by the independent adjustment of the plastic window , provided that the manufacturer's instructions are observed.

Adjustment of the eccentric system

Most problems with insufficient tightness of plastic windows are solved with the help of the mentioned eccentrics. These elements are located at the end of the leaf, where the handle is also located. As a rule, self- adjustment of the plastic window due to eccentrics requires the following actions:

• Pull them to yourself;
• Perform sufficient rotation;
• Release the element so that it is naturally in place by means of a spring mechanism.

This procedure should be performed during off-season periods. For example, plastic windows in winter require a higher level of pressure, and in summer, accordingly, ventilation is desirable.

This method allows you to adjust the degree of pressure in the part where the handle is located. If it is necessary to strengthen the pressure of the leaflets where the canopies are located, then another method should be used.

Horizontal adjustment

This operation requires a hex key. The meaning of the procedure is to eliminate small distortions of the window, which provoke drafts.

Horizontal adjustment is carried out by simple manipulation of the key in special adjusting holes, which are located in the hinges of the structure at the top and bottom. Rotating the key, you can increase or shorten the gap between the loop and the leaf. The procedure should be carried out delicately, since the mechanisms of the system are very sensitive to physical influences. After testing the course of the key, you can understand how to adjust the plastic window, so as not to blow, in a particular case. Then it remains to bring the angle to the optimal position.

Vertical adjustment

The need for vertical adjustment occurs in cases of sagging of the leaflets, which also affects the tightness of the window. The location of the operation is the same adjustment hole, which can be found under a special cap. The meaning of this setting is similar and aims to minimize or increase the gap between the loop and the flap - by controlling the amount of the angle, you can get the most comfortable microclimate.

It is noteworthy that the cost of plastic windows at the level of the budget segment (within 5-12 thousand) does not mean that the system will lose in the adjustment possibilities. Regardless of the price, modern designs from PVC can be called unified according to the basic principles of the technical device.

How to replace the seal?

If the described adjustment methods do not presuppose the correction of defects in the operation of plastic structures and mechanisms, then the replacement of the sealant is made precisely because of their unsatisfactory work in ensuring tightness. Screws because of the obsolete cord is especially felt, if you use winter plastic windows, specifically designed to increase the thermal insulation function.

A new seal should be suitable for a particular window model, otherwise an even greater gap may develop. The work will require a quality adhesive that is able to securely fix the rubber, and scissors. Also, it is necessary to determine in advance how to adjust the plastic window so that it does not blow, and then proceed to renew the insulating element.

Removing the seal will not cause problems. The main thing is to find the grooves and carefully remove the cord, without damaging the plastic. Further, the formed niche is cleared of dirt and dried, after which glue is applied to the surface. Stacking is done with a single piece, the edges of which are also fixed with glue. This completes the replacement procedure.