Homemade for the garage. Shelves in the garage with their own hands. Self-made garages for your own hands

Garage for most car enthusiasts is a place that contains not only a vehicle, but also a huge number of small things that do not have a "shelter" in the house or apartment. Accordingly, in order to expand its useful space, it is necessary to use it competently. For example, gambling for a garage is a good opportunity to combine in this, in fact, a small room the functions of a workshop and a barn.

Cabinet: functionally, comfortably, ergonomically

Garage can be equipped with various equipment. For example, to store tools, garden tools, various sports attributes, it is best to build a small cabinet. Thanks to him, you can store a number of things correctly and systematically, and therefore find the right tool or equipment will be easy and simple. However, in order to install a cabinet, it is necessary that there is enough space in the garage. Otherwise, in this and so-and-so small room it will not be easy to pass.

Shelves: compact, practical

Any garage is divided into two parts - the one in which the car stands directly and the one in which it is being repaired. Shelves for tools in the garage It is best to install it in the zone where your machine will be located. It is important that they are located above its roof. The width of the shelves should be calculated so that they can be placed on an ordinary box with tools, such as a Bulgarian, saw, perforator or screwdriver.

The load on the shelf will be considerable, so you need to make it strong and reliable. For example, the reinforcement should be at least 12 mm thick, while it should be located at a distance of 50 cm from each other. To create such a homemade for the garage, you need to cut pieces of reinforcement, taking into account its entry into the wall by about 15 cm. Now drill a hole with a suitable diameter and depth. We drive the pins into the wall, level them along the length.

On the edges of the pins should weld small corners, which will limit the garage shelves. A solid metal strip or thin reinforcement is soldered along the wall. We look, that the design appeared equal and accurate, then we paint it.

How to make a flooring?

Garage equipment inside - the process is responsible, because you need to take into account the ratio of the parameters of the room and furniture, which it will be located. So, after the paint dries, you can do the arrangement of the flooring on the shelves. As it, we will use boards that will be superimposed on the reinforcement. In this process, it is important to remember how to properly fill the space between the shelf and the ceiling. In addition, it is necessary to calculate how heavy things will be stored on it.

Suspended shelf: how to do?

To use space more rationally, you can use hanging shelves as a homemade for the garage. They are located immediately below the ceiling. They are attached to special brackets of completely different design features. It is important to choose such shelves, which will evenly distribute the load pressure along the wall surface. Here are the stages on the basis of which we will build a hinged structure for the storage of equipment:

1. We measure a horizontal line on the wall. It is on it will be attached brackets.

2. To secure the shelf in the garage with your own hands, we will need self-tapping screws. They are more reliable.

3. After installing the fasteners on them, you can mount the shelves - wooden or plywood, which are attached by means of screws.

4. To hinged shelves were reliable, you can complement them with corners. This will also prevent them from sagging under the load.

Shelf: a worthy option

Equipment for the garage with their own hands is not as difficult as it seems, especially for those who like to make and repair themselves. And even the rack, which at first glance differs in overall dimensions, you can build yourself. However, in view of again the size, it is necessary to do the manufacturing of the rack from the drafting. To do this, you need to look at your possessions in a businesslike way and think about its contents, and then decide on the size of the future cabinets.

Ideally, the shelves need to make one wall of the garage, with the height to be marked, depending on the size of the cargo will be stored in it. For example, it is advisable to make the lower shelf highly, because it is here that heavy cans, winter tires or other large things are put.

Creating such homemade for the garage with their own hands, you need to calculate the number of shelves and their depth. Determine the size, then transfer them to paper. Typically, a rack for this small room is done in the entire wall and most often from floor to ceiling. With regard to the width of the shelves, it is calculated according to the severity of the load. Most often they have a width of one meter at a depth of up to 60 cm. In such structures, you can store both large objects, and hand tools or fasteners.

Choose strong materials

Creating self-made garments for the garage with their own hands, I want them to be as durable, reliable and durable as possible. To achieve this, use high-quality materials, for example, metal. To create vertical racks, you need to stock up with metal corners with a shelf of approximately 30-50 mm or a profile with a rectangular cross-section. To attach decks, we first need to create a skeleton. It is attached to vertical stands by welding or using self-tapping screws. To make directly the shelves in the garage with your own hands, you can use a wooden board with a thickness of up to 25 mm, but the chipboard and ordinary plywood are quite suitable. Ideally, the boards can be painted or treated with formulations to protect them from the effects of fungus or moisture.

How to create a metal rack?

So, we compiled the drawing and calculated the amount of building material. Now cut the metal profile according to the set sizes. Mark where the vertical racks will be mounted. First you should weld the pieces of the corner, which will be the frame of the shelves, to the vertical posts. It is important that their location is clearly horizontal. We weld the frame, which will then need to be treated with a primer and painted. This will protect the structure from corrosion.

The last stage in creating a similar craft for a garage is the arrangement of shelves. First they need to be cut, then to do the location - along the frame or across it. The wood preforms must first be treated with special means. After that, the shelves can be attached to the carcass with screws, and they must be tightly adjusted to each other.

Wooden shelving

Homemade garage equipment can be created entirely from wood. True, it is used less often, although it is a more economical option. To make vertical racks, you need to take a beam of sufficient thickness - not less than 100 mm. As shelves we use boards, plywood or chipboard. The feature of the wooden rack is that, despite its strength, its load capacity is not so high. Accordingly, it can be used only to store not very oversized things. Wooden shelves are fastened to the frame using metal fixing corners and bolts.

Prefabricated shelving - a practical alternative

However, it is not necessary to create equipment for the garage with your own hands. For example, there is a more profitable and simple solution to the problem of arranging this space - the use of ready-made structures, which can only be collected. First, it will take less time. Secondly, you will not need to prepare drawings and buy materials - everything will be delivered to the facility in the finished configuration. Thirdly, you can collect such a rack alone and quickly enough. Fourthly, modern manufacturers offer a wide choice of ready-made structures of any configuration, and therefore, problems simply will not arise.

To create a prefabricated rack, galvanized metal is used, which is topped with paint and varnish or polymer. For the manufacture of shelves, galvanized sheet metal is also used. They can be installed at any height, while it is due to the resistance to corrosion and high humidity, these designs are very popular among buyers. The design features of some shelving models are such that they can be combined with wooden shelves, as well as components made of particle board or plywood.

How to prepare?

By purchasing a prefabricated rack, you will encounter only one job - its installation. It is simple. In this case, only pliers and a screwdriver are required, and the necessary fastening elements are already included. It is important to perform the assembly horizontally, after which the assembled structure is simply raised. First, vertical stands are assembled, to which the shelves are subsequently attached at a certain distance. It is important to take into account that for large and heavy loads, place should be left on the bottom shelf, and it should be of sufficient height.

Thus, to create a homemade for the garage is quite easy and simple even on its own. In this case, no special knowledge or skills, nor any rare tools will be needed. Knowing just to correctly calculate the dimensions and draw up the drawings, you can create a design that will be convenient and easy to use, as well as durable. And if you do not want to bother with the creation and installation of the shelving and shelves, there is a worthy alternative - a ready-made design that can only be assembled.