How to install the split system yourself: the sequence of works

The air-conditioning system is quite common in modern apartments. It allows you to create an atmosphere of coziness in the house, adjusting the climate inside the premises. Since it is not very simple to install a split system yourself, it is necessary to strictly follow the sequence indicated in the installation instructions. It must be said that it is possible to perform all actions with one's own hands.

Before you install the split-system yourself, you must collect all the necessary tools, determine the location of the devices, and also with the version of the unit. For example, there are devices that can be installed on the floor, rather than clinging to the wall. And in this case the installation will be easier and faster.

So, you need all the parts that come with the machine, as well as a punch, roll, reinforced tape, pipe cutter, brackets (for attaching blocks), a wrench, a level, a device to eliminate air from the copper track. In addition, you will need to get the device to establish that there is no leakage of Freon.

Before you install the split system yourself, you should choose the right place and conduct a separate wiring, since the presented device has a large capacity. Now start the installation of the external unit. To do this, make holes in the wall and fix the brackets on it. Use the level during operation. In addition, be as careful as possible with refrigerant tubes that do not have to bend. And also it is necessary to protect the external block from icicles and rain with the help of a metal canopy above it.

Before you install the split-system yourself, make repairs inside the premises (if necessary). After this, it is necessary to fix the indoor unit. With the help of a level, mount the fasteners, and screw the device to them with screws. Next, you should check how well the device is firmly mounted. To do this, it must be turned on and evaluated for noise and vibration. At this stage, note that the unit must not be installed above the batteries, near appliances operating at high frequencies, above the bed. The level of the blocks should be kept as correctly as possible.

If you do not know how to properly install the split system further, follow these recommendations. To ensure that the tubes and hoses are not visible, it is necessary to make them shtroby in the walls or to purchase special decorative boxes. Further with the help of special equipment it is necessary to eliminate air from all the tubes.

In order to be sure of the normal operation of the device, it is necessary to check it using an appropriate testing program. Well, in the last place you need to remove all the garbage that appeared after work.

During use, try to closely monitor the level of freon in the tubes, as well as the cleanliness of the external and internal components. Also note that between the blocks the height difference should not be very large (depending on the model of the device). That's all the advice on how to install a split-system on your own. Good luck!