HomelinessDo it yourself

Niche from plasterboard for curtains with own hands

If you want to make a qualitative repair, then the room must be decorated in one style, where there is no space for superfluous elements that do not fit in the interior. This is especially true for the living room, which can be called the "face" of the whole house. Do not assume that such a task can only be done by a professional. Every home master will be able to cope with the work to create a style solution, after that you will be able to realize your intentions.

If you have already managed to find curtains, but could not find the cornice of the desired shape and style for them, you can continue to look for or perform a niche under the cornice. For this, it is customary to use different materials today, but the most popular are gypsum board structures.

Varieties of niches from the GKL

Gypsum boardboard niche for curtains can have a variety of sizes and have a certain shape. Such structures are usually installed in tandem with two-level ceilings, which are built around the perimeter of the room and create a niche near the window. This option is more difficult, but you can choose for yourself and simple solutions.

As one of them on the ceiling formed a box, located along the wall. It will be along the side walls near the window. An alternative solution is to create a box along one wall. Sometimes the design is made broad, in some cases this parameter does not exceed 20 cm. However, in a wide box, spotlights look great.

If you will carry out a niche from plasterboard for curtains, then the box can be made in height from 15 to 50 cm. It can have straight or curved shapes. The variety is large enough, but the choice is yours. Do not look for complex ways, because a simple niche will look spectacular and aesthetic.

Preparatory work

Beginning of work is necessary with the acquisition of materials, among which are:

  • Plasterboard sheets;
  • Self-tapping screws;
  • Putty;
  • Profiles;
  • Tape for sealing joints.

Choosing profiles, you should prefer two types:

  • PP 27x60 - ceiling;
  • Mon 28x27 - guide.

Preparation of tools

If you are going to carry out a niche from plasterboard for curtains, you will have to prepare some more tools, namely:

  • Perforator;
  • knife;
  • Roulette;
  • Strong thread;
  • Screwdriver;
  • putty knife;
  • pencil.

Carrying out the markup

A very important step is marking. At the heart of these works is the correct arrangement of the structure. Here you need to navigate the radiator or the window sill. The cornice should be located inside the living room, in relation to the listed elements it should be removed by 16 cm.

Having determined the size of the protruding part of the radiator and the window sill, the value should be added exactly 16 cm, this will allow to get the place of fixing the cornice. This size is carried along the side walls. To the two points obtained, apply the ends of the paint string to get a straight line. This is the end of the niche for curtains and the beginning of the decorative box. From this line it is necessary to postpone the width of the box into the living room and apply one more line, which will allow to obtain the installation dimensions of the box. Now you can proceed to the assembly work.

Carry out the assembly of the frame

If you carry out a niche from plasterboard for curtains, then in the next stage you can build. Start work is necessary on the floor. The upper section is the width of the room, for example, you can take a parameter equal to 3.2 m. As for the racks, their length will be 8 cm. The standard length of the profile is 3 m, this indicates that , That one product will not be enough, so you will have to build up.

To do this, make 20 cm of a piece of profile, bending it at an angle of 90 °. This will create a rack. The same manipulations are carried out with the main profile. Not enough will be no longer 20, but 28 cm. This indicates that you will have to add a piece with this length. The extension of the profile fits inside. Fastening is carried out by self-tapping screws, on two leaves on each site.

If you will carry out a niche for curtains from plasterboard, then the next step, the entire structure must be raised to the ceiling and attached to the applied line. Through the profile with a perforator through every 60 cm holes are made. Start work is necessary, away from the wall by 5 cm in the holes are driven metal dowels, which are called quick installation. They should be hammered into the ceiling on the principle of nails, using a hammer. At the same stage, the racks are fixed.

Methods of work

Now two small segments of the PN profile are installed. Mounting is carried out on the lower edges of the racks. Fastening is carried out by two dowels. These cross bars will be needed to ensure the rigidity of the frame. Next, two profiles are added, their length will be the width of the living room. To connect the opposite walls, you need to pull the thread, and on the walls fix the racks of the ceiling structures. This will determine the horizon by which you will expose the bottom element.

When a niche is made for curtains made of plasterboard, the enlarged profiles should be placed on the lower edges of the posts, fixing them in this position. Under the weight of the element will bend, this will be noticeable in comparison with the thread. Now you can cut pieces of the profile, the length of each of which is 8 cm. They are installed in the profile on the ceiling and fixed with screws. The step between the intermediate posts is 40 cm. Now the lower profile is aligned along the rope and fixed to the bottom edges of the PP profile.

Gypsum boardboarding

If you are thinking about the question of how to make a niche for curtains made of drywall, you should familiarize yourself with the technology, which involves the plating of the structure. It is necessary to carry out these works only from the front and bottom sides. From the sheet, several pieces must be cut. Their width should be equal to the corresponding value of the box. The second strips will have a width that is the height of the box.

Fixation is done by screws, you can use a screwdriver for this. The back part is not wrapped, as it will not be visible. Now you can proceed with the installation of the hidden eaves, while the box itself is trimmed with putty. Its surface is ground, after which it will be possible to carry out decorative finishing. This option is the simplest. It can be used for work.

Backlight setting

A niche for curtains made of plasterboard, the dimensions of which were mentioned above, can be decorated with decorative lighting. This will emphasize the style of the room. You can use LED lamps, which are located inside the niche. For this, an additional shelf is usually made. With the help of lighting you can create a special atmosphere in the room. It is especially relevant for night and evening time.

Additional finishing

If you are faced with the question of how to make a niche under the curtains of plasterboard, then you should know that as the final stage is putty. Thanks to this, the cornice can be made complete, in addition, it will prepare the surface for finishing.

These works can be started 2 days after the installation has been completed. For this, the surface is cleaned of dust and wetted. Using a spatula, the master will fill the seams with filler. A reinforcement mesh is superimposed on top and covered with a small layer of the composition. After drying, the surface can be sanded with sandpaper. Then it is necessary to put additional layers of putty, after drying which the surface is again ground.

Specialist's recommendation

If a niche is placed along the entire wall, the plasterboard construction will look much more impressive. But if the cornice along the length is equal to the window opening, then you will have the opportunity to save by doing a niche of the same size. It can be interesting to decorate. It looks great box, which is performed in one color with the wall. The niche can be lined with a mirror, it visually lifts the ceiling. When a niche is made for drywall curtains with your own hands, it is sometimes decorated with molding, it is a convex bar, giving the design a complete look.

Conclusion

Before manufacturing a niche, it is important to determine its dimensions correctly. If the design is too narrow, the curtains will deform, while an extremely wide niche takes up a lot of space. If you install the design correctly, you will get a beautifully designed ceiling, while the curtains will become an elegant continuation of it.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.unansea.com. Theme powered by WordPress.