Furnaces for T-Shaped Bowers

The combination of a rectangular heating furnace in a single design and a simple heating shield, with a simple system of gas circulation channels, led to the appearance of a very popular furnace with high heat transfer and used to heat large areas. In addition, the T-shaped furnace is easily built into the piers and is also convenient for heating adjacent adjacent rooms.

Having in plan a T-shaped form, the furnace includes all elements of the rectangular heating furnace structure located in the profile rack and the channels of the heating plate located in the profile shelf. The overall dimensions of the furnace are about 2.03 m in height, the width of the shelf is 1.25 m, the base is 0.4 m, the height of the pole is 0.5 m. The structure is provided with an ash chamber closed by the blower door, a grate, a large combustion chamber with a furnace Door. The walls of the combustion chamber are laid out half a brick thick and are at the same time the walls of the furnace, which provides additional heating of the lower levels of the premises.

On the front of the rectangular furnace, above each other there is an ash-blown, furnace and cleaning door. The ash door closes the ashtray opening in the second and third rows of the masonry, the furnace door closes the furnace opening in the rows of masonry from the sixth to the ninth. The grate fits in the fifth row, under the firebox it tilts toward the grate. The facade cleaning door closes the opening in the fourteenth and fifteenth rows of the masonry stove. Two more cleaning doors close the openings in the second and third rows and the twenty-fourth and twenty-fifth rows of the masonry of the right side of the T-profile shelf. In the twenty-eighth row of the masonry of the T-profile rack, there is a view, overlapping the outlet to the chimney.

Acquiring stove appliances, for the furnace, a door of a sealed structure with thermal shielding is needed. Grate, reinforced type, t. The furnace is designed for all types of fuel. For the laying of an oven for a house, about 500 pieces of red kiln brick will be needed . If it is planned to use coal as a fuel, the walls of the furnace and its overlap are better laid out of refractory bricks. Oven laying is carried out on clay mortar, which will require up to half a cubic meter of clay and as much sand. To build a reliable waterproofing, only roofing felt or roofing material is used, it needs 3 square meters. Meter. In places of fastening of furnace devices, 3 m of annealed annealed wire, asbestos cord or tape is needed. With the strengthening of the furnace door and the grate, between the masonry bricks and the metal of the furnace equipment, gaps of at least 5 mm are left.

Operating the T-shaped furnace, through the cleaning doors in three places, access to the accumulation of soot and dust in the ducts of the furnace is provided for their timely cleaning.