Electric chiller with water cooling: reviews

If you decide to buy an electric water-cooled tile cutting machine, then, after visiting the store, you will be able to familiarize yourself with a wide range of similar products.

Need to use

Electric models are recommended to be purchased only if it is intended to carry out work in large volumes. With this machine it will be easier to cut the tile, the master will be able to improve the accuracy of work and reduce the amount of reject. The unit must be equipped with a water cooling system to ensure that the life of the device is longer. Among other things, if the tool is not equipped with such a system, then the probability is high that the product will burst under the influence of high temperature, which occurs during the friction of the cutting element.

As the best option is exactly water cooling, because the tile is almost not heated, and the cutting line is perfectly even and without chipping. A special tank is provided for the liquid in the unit, from which water is supplied to the cutting area at the command of the master. Among other things, you can find stationary options, as well as mobile, which resemble miter saws. The latter are an electric hand tool, characterized by mobility. But for convenience, machines of stationary type occupy the first positions.

Feedback on the main criteria

If you decide to purchase electric water chiller, then, according to users, it is necessary to pay attention to a number of the following criteria. Among the first can be identified the assembly and engine power. Before purchase it is necessary to consider in detail the machine for the absence of defect and other defects. It is best to start the equipment in place, which will allow to check how well the engine works. It is important to analyze the status of the site. The less foreign vibrations you feel when working, the less rejection you allow when cutting.

When consumers select an electric water chiller, they most often pay attention to the power of the motor. As in any other electric tool that operates on a mechanical drive, the engine determines the performance, service life, hardness and thickness of the material. As the best devices are those that have a power of 800 watts and more, while the number of revolutions should be within 11,000 per minute.

Feedback on the location of the engine and the availability of spare parts

Electric water chiller with water cooling can be characterized by a different arrangement of the motor. According to users, for those devices, where the motor is located from the bottom, less impressive dimensions, but in aggregates with a top engine, there are more possibilities for making precise cuts. It is important to take into account the possibility of cutting the material at an angle. Experienced masters indicate that the easier it is to perform the adjustment of the angle, the more professionally the tool is considered. This function indicates even fewer errors when cutting tiles. Whatever the quality of the instrument, during operation, you may encounter the need for its repair. Therefore, before acquiring the unit, it is necessary to ask experienced builders whether it is easy to purchase spare parts for this or that brand of equipment.

Reviews about the characteristics of the cutting

If you want to buy an electric water-cooled tile cutter, the reviews are the most positive, then you need to ask what the possible length and depth of cut is. If we are talking about electric tools, the depth of the cutting is, as a rule, quite impressive, in some cases it reaches 40 millimeters. If you want to choose a good machine, you should follow the normal lengths that vary within 0.5 meters. It is important to pay attention also to the characteristics of the abrasive disc. Experienced specialists, as a rule, use the diameter of the element from 18 centimeters and more.

For reference

Among the additional advantages of electric tile cutters, one can distinguish their functions, which do not differ in manual models. This can be attributed cutting at an angle of 45 degrees. This functional is especially important when working with the corners of walls. Cutting is obtained with even edges and the most accurate. Another advantage is the speed of work, it is for this master-tilers acquire electrical equipment, because it takes less than 1 minute to cut one tile.

Features of the electronic system of some models of electric tile cutters

If you want to buy a Zubr electric water chiller, you should remember that in such equipment there is no system that would be responsible for maintaining a certain frequency. Among other things, there is no soft start system. However, you can rely on protection against overloads and overheating, which is provided by the presence of a thermostat.

On sale, you can find some models that have an overload indicator, which indicates the need to slow the delivery of the device. Among the units that have such functionality, you can distinguish Eibenstock EDS 181. For more comfortable work, you can select tile cutters that provide protection against accidental start. Similar electronic diamond devices are equipped with a duplicating button, which fixes the trigger key in the on state.

Electric stirrer with water cooling Sturm is presented in the sale of simpler models, in which there are separate buttons, each of them works on shutting down and turning on the device. In similar devices there is an enhanced protection against moisture penetration into the internal space of the machine, which helps to protect the master from electrical injuries. For this reason, all tile cutters have protective parts, namely: built-in RCDs, winding insulation circuits, and enclosure systems. They do not pass water. Despite the fact that such a powerful protection is available in a variety of units, the safety class 1 devices require a grounding.

Reviews about mechanics

Electric chopper with water cooling "Makita" can have a table of different sizes. From the size of the frame will depend on the size of the tile, which you will cut. The larger the table, the longer the spindle turns and the more impressive details can be placed under the diamond disc. If you choose an electric water cooling chisel "Zubr", the reviews of which are presented in the article, you will be able to expand the table space with supporting supports or active "ears". According to users, this helps to increase the comfort and functionality of the instrument. The master has the opportunity to cut materials of different sizes.

Conclusion

If you decide to choose the equipment, the engine of which is located under the bed, then these devices will have enough roomy water tank, so that there is no need to replenish the tank quite often.