Apparatus for "living" and "dead" water with their own hands. Apparatus for making "living" and "dead" water - photo

Once upon a time in Russian fairy tales came the notion of "dead" and "living" water. The first heroes bathed their wounds, and several sips of the second animated the man. You can believe in legends or not trust them, but scientists have learned to receive these magical fluids. The process was called electrolysis. As a result of the action of an electric current on ordinary water, "live" and "dead water" are obtained. The device with its own hands is easily made from improvised materials.

The essence of a unique disinfection, or a little chemistry

First, two metal plates are lowered into the water tank, each of which is connected to one of the battery contacts. When this circuit is closed, electricity arises in it, and the process of electron motion begins in the liquid. An acidic medium forms near the anode plate, and near the cathode plate an alkaline one. After disconnecting the device from the current, everything is mixed, returning to its normal state, the water again becomes an ordinary liquid.

During the electrolytic reaction, several substances are formed, among them:

• Oxygen, acid and ozone;
• Chlorine and hydrogen peroxide;
• Nitrogen and hydrogen.

Where did all these substances come from? It is known that water is a universal natural solvent, before which no liquids, gases, or minerals can stand. As a result of electrolysis, the molecular bonds change. The activated solution becomes softer and more transparent than the original solution. Oxidizers, produced from the water itself, disinfect the liquid and return to the previous state, having fulfilled its task.

What are the terms "living" and "dead water"? The device, made by hand, will help not only to show the children an interesting experience. Science proves the disinfecting and therapeutic properties of these fluids.

Composition and features of "fabulous" liquids

The very first device for the preparation of "living" and "dead" water by their own hands for industrial purposes was designed by workers of one of the boreholes in the USSR. They accidentally discovered the healing qualities of such a liquid. After washing it, workers burned burns and cuts on the skin, drinking water inside increased the overall tone and performance of people. The phenomenon became interested in medicine, but the use of activators was not particularly spread.

It turned out that the "living" fraction has a slightly alkaline medium and is a strong biostimulator. Processed by her seeds of plants give more strong shoots and a rich harvest. Ingestion strengthens human immunity, improves digestion. The influence of such water on the aging processes and the growth of cancers is noted.

"Dead" water has a slightly acidic composition, is a strong disinfectant and sterilizing agent. This fraction slightly smells of acid and has a weak astringent taste. This liquid is perfectly treated for colds by rinsing. It reduces blood pressure, calms articular pains, relieves insomnia.

How to make an apparatus of "living" and "dead" water with your own hands

The simplest device for direct electrolysis is assembled from the following parts:

• Glass liter capacity;
• Two rectangular pieces of food grade stainless steel (145 mm by 40 mm);
• Diode bridge ;
• Two pieces of power wire;
• plug;
• A bag made of denim or tarpaulin cloth ;
• Plastic circle with holes.

The edge of each strip is bent at an angle of 90 degrees (10 mm). On the bent parts, 2 holes for bolts are drilled. On one of the electrodes between the mounting holes make one (larger) for the installation of the diode.

The order of the device assembly

The apparatus of "living" and "dead" water with their own hands is mounted in the following sequence. The electrodes are placed on the lid and bolted. Metal strips must be parallel to each other. The diode is screwed into the corresponding hole and connected to the upper lead of the wires. The wire is also soldered to the second electrode. Both outputs are closed on the switch.

An anode-plate with a diode is put on a sack made of tarpaulin to collect "dead" water. Immediately after switching off the current from this case, it is necessary to quickly pour the liquid into a separate vessel. Around the negative electrode, a concentrate of "living" water is formed.

The tissue bag is used as the separation membrane. It prevents mixing of the solution after power failure. The diode serves as an AC rectifier from the network.

The apparatus for the production of "living" and "dead" water with their own hands is ready. It remains to fill the jar and sack with ordinary liquid from the tap and plug the plug into the mains.

How long can the "live" and "dead" water

The device itself (the photo shows it) is assembled and connected to the power supply. The reaction should last about 5 minutes before the banks warm slightly. During this time it is necessary to prepare two vessels for transfusion of the obtained fractions. Immediately after switching off the current, the electrodes are carefully removed from the vessel along with the canvas cover. "Dead" water pours out from the pouch into one container, and "live" (remaining in the main bank) into the other.

If you linger and leave both liquids in the original vessel, the reaction very quickly will happen in the reverse order, and all the released components will mix. The water will remain activated, disinfected and useful, but will lose the exclusive properties that the apparatus of "living" and "dead" water has given it. With your own hands, you can spoil the whole thing, and you'll have to start the process first.

The storage terms are as follows:

• Acidic liquid ("dead") is stored for up to two weeks;
• Alkaline ("live") should be consumed within a few hours, as it quickly loses its healing qualities.

Is it possible to install a conventional stainless steel for the anode and cathode

Making the apparatus of "living" and "dead" water with their own hands, it is important to use food steel, free from all impurities. It is proved that under the influence of electricity during the reaction, molecules of heavy metals are released. Water, saturated with ions of nickel and chromium, molybdenum and iron, vanadium and others, becomes not only harmful but poisonous. It can not be used for drinking.

That is why for the cathode and anode in such a device take food grade stainless steel.