How to make a sliding gate with your own hands? Brief instruction

The first impression of the house is the gate. They should not only be reliable for their intended purpose, but also look at the proper level, fit well into the architectural ensemble. The gates of private houses can be swinging, sliding, automatic or manually opening.

For a long time, traditional swing constructions were considered traditional, but now more and more people are asking themselves how to make sliding gates with their own hands.

Such products are a solid panel moving along the fence on rollers, which are mounted on special guides. The main advantage of such a structure is the economical use of space. Such a gate can be opened in any weather, and in what direction they will be opened, the owner chooses independently.

How to make a garage gate with your own hands? The manufacturing process is as follows:

1. Formation of the foundation. There are two main types of base under the sliding gate:

• The 500x1500x50 trench is trenching, the reinforcement is laid inside and the mixture is filled with cement. When installing the sliding gate frame on such a foundation, it is necessary to check with the help of level that there are no distortions, otherwise the gate will not open.
• Excavated two pits 500h500h1500, installed pillars. Usually it is a steel pipe, but it is possible to use a channel, a solid wood bar made of concrete or a pillar made of brick. Its base must enter the ground to the depth of the soil's freezing. The pillar is poured with concrete. After about 8 days, the concrete freezes. When using brick structures it is desirable to install embedded elements in the number of 3 pieces, having deviated from the edge of the opening by 100 mm.

2. How to make a sliding gate with your own hands from existing materials? There is no particular complication here. The support beam, which holds the entire load of the gate, is the main element of the structure. Therefore, it must have sufficient rigidity. It is best to use a hollow square pipe 20x20 for these purposes. A groove 2 mm wider than the support for the rollers is made in the lower face. In the groove, rollers or support carriages are inserted, which are then attached to the foundation. To strengthen the square tube with a groove, it is additionally connected with another similar pipe through small segments of the same profiles. To ensure that the gate does not touch the ground when opening, the load-bearing beam is mounted on the cantilever blocks.

3. The next stage of how to make a sliding gate with your own hands is the manufacturing of the gate itself:

• Carrying out the support frame for the product panel. Use can be rolled metal of any cross-section. The only condition is to ensure sufficient rigidity of the structure.
• Frame rim for increased rigidity and reliability during operation; Guide rails are welded to the bottom of the frame.
• Surfaces of products are covered with soil, and then after drying they are dyed. Pick up the paint should be resistant to the environment.
• Gates of the gate frame. Material for this can be corrugated board, metal panel. Fastening of a cloth is carried out by rivets or саморемими.

4. The final stage, how to make a sliding gate with your own hands, is to install the gate.
For this you need:

• Set the rollers at the maximum distance from each other.
• Attach the frame to the carriages.
• Conduct tests on the movement of the gate on the guides and, if necessary, carry out modifications for smooth sliding of the rollers. Closing and opening the gate can be manually or install an automatic mechanism.

Everyone can build a metal gate on his own plot. This will be a reliable and durable design, designed not only to preserve the owner's property, but also to decorate the house.