Acrylic baths: reviews

Acrylic baths are made of modern polymer materials.

How to make acrylic bathtubs

The experts' opinions contain information that the production of products takes place in several stages. First, the acrylic sheet is heated to 180 degrees, then in the vacuum chamber, this preform is shaped and cooled. After that, the bath is reinforced with glass-fiber and polyester resin coated sheets of DSP sheets, either with high-density polyurethane resin or with a metal mesh. After that, the product is sent to the oven for drying. At the final stage, finishing is done, in which the sides are formed, the edges of the bowl are cut off, and the overflow and drain holes are drilled.

Which Acrylic Baths to Choose?

Customer testimonials indicate a wide variety of shapes and designs of products. However, it is not necessary to acquire too complex forms, since these baths are likely to be of poor quality, since the acrylic sheet is very difficult to deform. Quality bath should be smooth, have a uniform color with a shade of gloss. The thickness of the acrylic sheet is determined from the side, where all the layers are clearly visible. It should be borne in mind that in the bottom area the acrylic layer is thinner.

Often the products are sold complete with a frame, through which they are installed, for example, corner acrylic bathtubs. The frame must support each corner of the bowl and not be solid, otherwise it can be said about the fragility of the product, which requires additional support.

How to Install Acrylic Bathtubs

The owners' comments say that it's easier to install the product if the frame frame is included. In this case, the construction is fixed to the floor or wall. In the absence of fastening, the bowl of the bath is placed on the legs, which can be adjusted to achieve the required height. After that, install all plumbing devices and connect the bath to the sewer. Then lay bricks on the floor on the cement masonry, leaving to the bottom of the bowl about one centimeter. After the solution dries, water is poured into the bath, and the gap between the bricks and the bowl is fixed with a mounting foam. Drain the water only after the foam has dried.

How to exploit acrylic bathtubs

Customer feedback recommends rinsing the bowl with warm water after each use. Cleaning is done with the help of liquid cleaners, applying them to a soft sponge. Do not use abrasives, alcohols, acids, as they damage the surface. Descaling is carried out with acrylic cleaning agents, you can use citric acid or vinegar. To preserve the gloss, the bath is rubbed with wax polish, which is applied to a soft cloth. When forming scratches, polishing pastes are used.

Acrylic bath: flaws and virtues

During bathing, the bath can sag because of the fineness of the acrylic. In addition, the product is very fragile and therefore can be damaged by mechanical stress. The surface of the bowl is also unstable against possible scratches. However, the advantages of this magnificent bathing bowl cover up any shortcomings.

Firstly, acrylic baths always retain shine and do not lose their color. In the absence of water, the bath does not cool down below room temperature, has good sound insulation, does not create noise during filling. Baths can have any shape, design and color, if damaged, surfaces can be easily restored. Thanks to a completely smooth surface, the products are hygienic, but they are not slippery at all. The light weight makes it easy to transport and install.