Wine shelf with your own hands: interesting ideas

If you are a healer of European cuisine, then you must like to pamper yourself with a glass of expensive wine at the table. This drink has gained popularity and does not give up the leading position. Such a noble product requires a special approach to storage. True connoisseurs collect collections from rare and valuable specimens. If you decide to acquire one, you should get a closer look at how the shelf for wine is made by yourself. The description of the stages of work will be presented below. You can do it yourself.

If the kitchen space is limited and has little free space, you can get a vertical shelf from floor to ceiling. To carry out the work, it will be necessary to do only a few holes in the plywood sheets and fasten them together. This design can be used as a partition to separate space. If you paint the inner surface of the product, the shelf will become a fashionable and stylish interior detail. But you can buy a shelf in the store, but some home-based craftsmen prefer to make such designs themselves. Among other things, you can use materials and tools at work. Thus, the design will cost almost free.

Preparation of tools

If you need a wine shelf, prepare the following tools:

• Drilling machine ;
• Electric jig saw;
• Grinding machine;
• pencil;
• Roulette;
• building level;
• Screwdriver;
• drill;
• Circular or hand saw.

Preparation of materials

In the building shop you can buy dowels, drill bits, screws, wood pallet, as well as sandpaper. The latter is needed for surface treatment.

Technology of work

If you are running a wine shelf, then the old pallet can be used as its base. To do this, use a circular saw to cut it, to separate part of the structure for manufacturing the shelf. Its height should be approximately 50 cm. The next step will be the preparation of boards for the base. With the help of a nail and a hammer, it is necessary to tear off two boards, the main thing is not to break them. Three small bars should be prepared to perform the separation and fixation of the bottom. The bars are sawed by electric or manual jigsaw, and the length of these blanks should be somewhat larger than the width of the pallet boards. They should go out a little bit beyond the ground.

Carrying out grinding and working with holes

The shelf for wine should look attractive, so the beams and boards should be ground. This will relieve the products from burrs and unevennesses. In this case, you should use sandpaper, the granularity which can vary from 120 to 200. You can also use grinding machines. On one of the boards should be made holes for glasses. Pallets, as a rule, have a width of 100 cm. The holes should be standard, but they can be made in such a way that they exactly match the size of your glasses. At standard sizes of utensils it is necessary to plan one hole, having departed from edge of a board 11,5 see After it it is necessary to mark three more apertures, having departed on 10 see. From an edge of a board there should be a distance in limits from 4 to 4,5 sm on width. Similar marks should be fulfilled on the other hand.

The wine shelf must have holes that are drilled with a drill or a drilling machine. From the edge of the drilled holes to the edge of the board, markings should be made, cutting off the unnecessary ones. The received corners are processed by an emery paper.

Assembling

The shelves for wine can be made of different materials, but the cheapest will be wood. If you used pallets, then after carrying out all the above steps, you need to collect the bottom of the shelf. The length will be placed glasses. The parts of the bottom should be fixed with self-tapping screws, preliminary in these places it is necessary to make holes with a drill. After the bottom is collected, it should be strengthened to the base. At the same stage, everything must be fixed with self-tapping screws, having previously made holes for them. In this case, it is necessary to exclude the possibility of splitting the board, otherwise it will be necessary to look for a replacement.

After assembly, the product should be sanded with sandpaper and covered with stain. As soon as the shelves for the wine are made, they can be hung on the wall. To do this, you should use the building level, with which points are marked on the wall. On the obtained marks, it is necessary to make holes with a drill, and then insert dowels in them. In the latter screwed self-cuts in the length of 2.5 cm. Hats should not tightly tighten, because the shelf will be removable.

Alternative shelves

Wine shelves with their own hands can be made using simpler technologies. For example, a wine cabinet can be made from a wooden box. It is installed on the steel legs, and in the bottom should be made holes for bottles. Between the rows there is a shelf that will separate the bottles. The simplest solution is a wooden board, which is fixed to the wall horizontally. Perform holes in it you can be using a special drill. The main subtlety is that the holes for the necks need to be drilled at an angle, and the circles should be the same. The wooden strip is cleaned, if desired, painted and treated with varnish.

You can independently manufacture the wine shelf, the simplest options can be the use of water pipes, or rather, what remains of the repair of the bathroom. With the help of adapters, the pipes are connected to each other in a zigzag construction. To prevent bottles from rolling down the surface, the pipes should be bent at a certain angle.

Conclusion

You can save space by using the wine bar, which will be located under the table. To do this, you can use reinforcing bars, which are bent in the form of hooks.