Which windshield is better to put? Install windshield. Manufacturers of windshields

Even the most accurate drivers are faced with the problems of choosing and buying a new windshield. Today there is a huge selection of different options. Original models and analogues are offered. Often car enthusiasts find it difficult to choose. Let's find out which windshield is better to put on the car.

If a crack appeared on the surface, then experts recommend not postpone repair and replacement in a long box, since using a car with an emergency head-on can lead to serious consequences.

Types of glass and features of their production

To understand which windshield is better to put, it is necessary to first learn about the types of products, the features of their design, production technologies. Modern automakers most often use elements manufactured using the following technologies:

• Stalinite.
• Triplex.
• Laminated glass.

Let's consider each species in more detail.

Stalinite

This is the technology by which tempered glass is produced . The material is heated and then gradually cooled. Glass, made by this technology, is five times stronger than ordinary glass. If it breaks, then a huge amount of non-sharp particles is formed. It is almost impossible to cut these pieces of glass.

Triplex

The car windshield, manufactured using this technology, consists of several layers (more often two), which are joined together by special glue. Plexiglas is used as the basic material for production. Triplex is a fairly expensive technology. But this glass perfectly absorbs sound, it is well remediable. It is characterized by high durability and comfortable operation.

By the ratio of price and quality triplex is considered the best option for most motorists. It is reliable, durable and safe. Some manufacturers offer a windshield "Chameleon" with anthermal film.

Multilayered

This is the most worthy option for strength and reliability level. However, the price for such glass is the highest. This product is made of several layers of sheet material. What are the features? These products have an adhesive between each layer of material. This is the highest strength. Often, this is installed in cars of a representative class, in armored cars, transport for collectors. Installation of windshield of this type protects even from a shot from a firearm.

Original or equivalent

Sometimes in car dealers on the question of the availability of windshields for sale, you can hear that there are original models and non-original. Often the price of the first product is three times or more higher. And then the car enthusiast begins to be interested, but is there any difference?

And the availability of this difference depends on the specific seller. Some say that there are absolutely no differences. Others confidently claim that it is necessary to purchase only the original windshield. Which is better - there is no single answer to this question. Sellers respond only with general phrases. There is no answer to this question among motorists, although a lot of articles have been written where people are frightened without specifying any facts. At numerous automobile forums people write funny things. And all because no one thought it necessary to go deeper into the matter.

Before comparing, what windshield is better to put, it is necessary to understand what is this original glass. Under the original products, many understand the product that was installed on the machine at the factory. No company, which collects cars, does not manufacture glass. They, like many other components, are purchased from various contractors. So the glass becomes original for a particular car, for another car it will not be the original. But the cost of the product is very significant.

Hence it follows that for the original overpay is not always worth it. Especially considering how much is the windshield. The difference, if any, is not as big as sellers in stores try to tell car enthusiasts.

Process of manufacturing a triplex

Each factory that produces auto glass, in fact, uses the same technology. The difference is only in the degree of automation of technological processes and the amount of manual labor. Let's consider from this point of view how to produce triplex.

To produce such glass, M1 sheet material is used as a raw material. Its thickness is 2 mm. Glasses are glued with polyvinyl butyral film. In Russia there are only two enterprises that are able to produce such products. This is the Bor Glass Factory and Salavatsteklo.

Each manufacturer produces M1 products with similar technical characteristics. All the glasses are almost identical - why not use cheaper products? At motorists there is a prejudice, that this or that model of glass wears out faster, it is scratched, erased. This is mistake. The wear rate is more dependent on the quality of the wiper blades, the presence of sand and dirt on the surface. About the same, everything is with PVB-film. This material is produced in large chemical companies. And factories that manufacture glass, buy this raw material.

If the film and glass are the same for each manufacturer, then what is the difference between them and what is the best windshield to put on your car? But still there are differences. The quality of the product depends on how the product is manufactured.

It is necessary to cut out two identical pieces of glass, to process the edges of the sheets, to make the edging, to give the two sheets the desired shape, to glue them using a film. Next - to give the product transparency, remove air bubbles. Then cut the film around the edges. All these stages together and each separately affect the quality and safety of the final product.

Why the difference in price?

How much does a windshield cost, say, a Ford Focus? About 8 thousand rubles are asked for the original product. The Chinese can manage in 3 thousand. But everything is simple - the price of glass affects the additional costs of the manufacturer.

The cost price of manufacturing is different. In Europe, this is one figure, for Chinese companies - another, in our country - the third. In addition, the price reflects the customs fees and transportation costs. If the glass came from afar, then naturally, it will cost more. The more mediators from the manufacturer to the buyer, the higher the price.

China or Europe?

What is the difference between the products of European and Chinese manufacturers? This is one of the most frequent questions asked by car enthusiasts interested in replacing the frontal.

It starts with the most important thing - it's the chemical composition. European manufacturers of windshields produce softer products, so even if low-quality wipers are installed on cars, such products are more resistant to mashing. Chinese glass is stiffer, so when dirt or dirt gets on the surface, wiping is formed. You can safely purchase and Chinese products. But if you need to replace the glass, you must immediately change the wiper blades and constantly monitor them.

Also, glass is produced in so-called handicraft production. These products are really not of high quality - the size of the windshield may not be appropriate. More often it is made from cheap materials.

Rating of the best producers

Now in the world market of auto glass is in the lead several major manufacturers. Let's consider the most rating.

Pilkington

So, the first manufacturer is the British company Pilkington. The company is considered the best because of the serious approach to production and quality control. In the last century, glass was produced using the technology of "Float". The products have a special coating. Also the company makes tinted automotive glasses. Technological processes are constantly being improved.

This brand tops the ratings due to high energy-saving technology, the original bending system, self-cleaning glass technology. The manufacturer combines old traditions and modern scientific developments.

Asahi Glass Company

It is a Japanese company that began to manufacture sheet glass back in 1900. Today, AGC controls one-third of the auto glass market. Products are installed on basic versions of Japanese and European cars. Among the assortment - any kinds of automobile glasses (for roofs, products with heating). Also there is a windshield "Chameleon" available.

The products of this manufacturer fully comply with all necessary standards. The company also produces glass for most domestic cars.

Sekurit Saint-Gobain

There are a number of other manufacturers that you can trust. This is the European brand Sekurit Saint-Gobain. The company produces real German glass. Installing the windshield of this brand will allow you not to worry. It is a reliable product that is chosen by the most prestigious automakers.

Conclusion

So, we have considered types of automobile glasses and their features. As you can see, there is no significant difference between the original products and analogues.