If the experience in sewing a little, processing the cutout dress seems a complicated operation. The easiest way to do this is with a skew-eyebick. But how to sew it, so that the product does not stretch and do not bend? The oblique bake is a strip cut from the fabric in the "oblique" direction, that is, at an angle of 45 degrees with respect to the share thread. It is desirable that the fabrics of the main product and the oblique bake fit each other in color That and structure. The width of the strip when cutting is easy to calculate - it should be twice as wide as in the finished form, with the addition of a small distance to the hem of the edge. But always the width of the bake should not exceed 3 cm, otherwise it will not be so elastic. Now there is a lot of ready-made skewed bekets on sale. But if you decided to do everything yourself, then first you need to iron the iron by folding it in half. The back of the fabric should be inside. Having properly ironed the fold, wrap the edges of the beak inward and also gently press it. It is very important not to pull the bake and fold its edges evenly. It is better not to smooth until the end, than to do it wrong, crooked.
How correctly to sew a slanting bake
Now you can start processing the cutout of your product with a bake. After she emerged from under the iron, it is already clear on her form how to sew a slanting bake. Unfold it and attach it to the front of the cutout. Align the edges of the beak and cutout so that there is no distortion. For accuracy, you can lay a mark directly on the fold line of the lapel. Attach neatly to the workpiece. If the length of the oblique bake is not enough, it is forced. The strips are cut at an angle of 45 degrees and folded very accurately to form a continuous line. During the sewing process, it is necessary to make sure that the connecting part of the oblique beika parts does not get to the prominent place of your product. In advance, attach the strip to the cutout and determine where there will be a seam connecting its parts. And how to sew the oblique bake further, it becomes clear. After all, it is ironed and folds in the right position.
How to sew the oblique bake to the neck
If the neckline or the neckline of the sleeve is being processed, try to lay the last joint seam very carefully - after all, it will be in sight. To fix the wrong side, tuck the bake and lay the seam, keeping its edge below the first pitted seam. On the underside of the beik product should be a bit wider. Here, the subtlety is that you have to scribble on the front side, not seeing the second edge of the oblique beika from the underside of the product. You should try to keep the needle of the sewing machine as close to the padded seam as possible. After all, this will be a finishing line.
How to sew the oblique bake to decorate the neckline or armhole? For this, you can use slanting strips cut from the finishing fabric of contrasting color, guipure or fabric with embroidery. The only condition - they should not be very dense, otherwise folded such a bake will lose the ability to take the shape of the cutout of your product, it will be difficult to drag on.