Details on how to make a dart

Today we will tell you how to make a dart at home. There are games that will suit children, and adults will be interested. One of them is darts. This is a very exciting activity, allowing you to relax and have a good rest with your family or friends. Darts are played both in the courtyard, and in the apartment, in the house or in the workplace. You can, of course, buy a complete set, but its elements are lost in time, and they can not always be found. What to do in this case: buy a new set or make a dart with your own hands? The answer is obvious - to find houses necessary materials and create it yourself, saving time that could be spent on a trip to the store. The dart manufacturing process is simple enough, and all materials are usually in a few minutes. This is an exciting creative activity, the realization of which takes very little time - a maximum of 30 minutes.

What materials need to be prepared?

Let's turn to the practical part of the solution of the question, how to make a dart with your own hands. You will need: a dry branch (the tree species does not matter); Cardboard or bottle made of plastic; Needle, designed to inflate balls; Steel wire (3-4 cm, diameter from 1.5 to 2.5 mm), a large needle for sewing or a nail (30-40 mm); Adhesive, heat-insulating tape or plaster.

Tool

To solve the problem of how to make a dart, a lot of tools will not be needed. Requires availability:

• Scissors;
• Knife;
• Pliers;
• Abrasive tool or material (for example, file or nazhdachka).

Phased manufacturing

Having prepared all the listed tools and materials, go to the implementation of the process itself. Next, we will describe step by step how to make a dart.

1. Take the branch and cut off from it a small piece, about 9 cm long.
2. Further work is necessary with steel wire. If you have a gypsy needle, separate 3-4 cm from it. From this material, you will create a sharp part of the dart. In extreme cases, you can apply a nail without a hat. In order to solve the problem of how to make a dart, check whether its front part (nail, wire) is sharp enough. For maximum security, this task should be carried out at the final stage.
3. From the ball needle, remove the tip, through which air is pumped when inflated. You will need another part of it, screwed into the pump.
4. Place the iron element in the branch. Screw it from the front. In this case, the softness of the core makes it easy to accomplish this task.
5. To adjust the size of the branch to the diameter of the needle for the balls, remove the layer of the tree at the top of the dart. After confirming the possibility of using an iron element, tighten it firmly.
6. Apply adhesive tape or other material. Ideally suitable adhesive. Wrap it in the location of the piece of iron. Thus, it will be possible to securely fix the iron element on a wooden base.
7. Then act neatly. At the top of the branch, make two notches in the form of a cross, in which you will later install the wings. To minimize the risk of damage to the workpiece, use a knife with a thin blade. The depth of the incisions should be about 5, but not less than 4 cm. Now you know how to make a dart without damaging the fingers and not destroying the workpiece itself.
8. The notches allow you to expand the tail of the dart. Using a plaster, tightly connect the parts of the wooden branch formed after the cuts. Also, the tape should be wound a bit lower, after which the upper winding can be removed - everything will hold.
9. If you like to experiment, make wings not from cardboard, but from a plastic bottle. You will need a piece of plastic cut in the shape of a butterfly. Make two elements out of it, dividing it in the middle. Bend each part in half so that an angle of 90 degrees is formed. An important advantage of plastic is its ability to withstand the effects of moisture. If you are interested in how to make a dart at home, which will serve for a long time, use plastic, not cardboard.
10. Install the wings into the notches until they stop. It is important that they are attached with effort. Sharpen the dart and you can start using it. As a target, use any board that is printed on paper or a painted target.

Alternative

Next, we'll show you how to make a dart from paper. We need a sheet with dimensions of 7 by 7 cm. We fold the prepared paper twice diagonally. We insert a needle. Apply four matches to the top of the dart. Strongly wrap the structure with threads.