The power system is an integral part of the correct operation of the car

The power system gives the car the ability to drive, because every time you press the gas pedal, the engine is gaining a lot of speed and acceleration begins. However, if it is often used, as well as rapid braking, the load on the machine increases and fuel consumption increases . Trying to win this way, the driver spends more than his precious nerves.

In cars, a sensor such as an economometer is often installed, with its help you can find out the minimum fuel consumption, but it should be borne in mind that the correct result will be known only at an average speed.

It is worth remembering that the power system needs proper operation. In most cases, drivers have no idea what's going on in their fuel tank, and it's rarely necessary to check it. However, there are situations when this item becomes clogged due to low-quality gasoline getting into it, and stagnation is formed. If the contamination is not very large, you can try to unscrew the cap from the bottom of the tank and drain it. In the event that the formed dirt has spread over a larger surface, it may be necessary to dismantle the whole mechanism.

It is also possible to contaminate the compensation hole in the fuel tank plug. When it occurs, the power system starts to "jam", that is, the fuel does not enter the carburetor. This is due to the fact that there is a vacuum inside, which the fuel pump can not handle . In order to find out if there really is a similar problem or not, simply open the tank cap. With this action, you should hear a sound that strongly resembles the opening of a can.

The power system needs constant monitoring of filters, which, during operation, have a tendency to clog, forming harmful substances, which in large quantities begin to enter the atmosphere. Although the plant has a certain lifetime of filter elements, it is worth considering how often the car is used and in what conditions.
To ensure that the car's power system is operating in the correct mode, it is necessary to check the carburetor adjustment, because after the time has elapsed, the settings are knocked down and the parts are dirty. In this case, a rich or poor mixture may form , which subsequently enters the cylinders. At the same time, the power is lost, the engine starts to overheat, and fuel consumption increases, the carburettor starts to "shoot" or publish "claps". At the slightest suspicion of the malfunction of the part, it is necessary to check and clean it, and the cleaning must be from inside as well as from the outside.

The diesel power supply system, like the carburetor, ensures that fuel enters the cylinders and the gases are exhausted. It requires constant cleaning of the filters and checking the fuel tank.

Do not forget that with a long simple car without movement in the float chamber the gasoline evaporates, so that it will be difficult to start the engine, so before this work it is necessary to pump fuel into the part, using a pumping lever for this.