"Tele2" access point: setting up the Internet on mobile devices

Acquiring a new gadget, smartphone or tablet PC, any user planning to use the Internet, faces the problem of making settings. Of course, it's nice when this procedure is performed in automatic mode and you do not need to independently look for an answer to the question which access point "Tele2" should be specified in the settings. However, in all cases, the setting of the mobile network parameters is so smooth. Sometimes, in order to take advantage of all the same Internet, you need to work hard. In this article we will talk about how to configure access to the Global Network and which access point "Tele2" should be registered in the device.

When is it necessary to configure the Internet?

In general, we can distinguish three cases when it is guaranteed, at least, to check whether there are the necessary parameters for accessing the Internet in the corresponding section of the cell phone menu:

• When buying a new SIM card - even if you previously successfully used the Global Network to search for data, view it, and other operations, then when you purchase a SIM card from the operator in question (however, as for the SIM card of any other operator) Setting parameters;
• When installing an existing SIM card in a new cellular phone, an access point must also be registered; "Tele2" Internet will provide only if there are appropriate settings;
• When replacing the SIM card (due to loss, breakage, etc.).

General settings

Due to the variety of mobile devices, it is necessary to explain and tell about possible nuances and subtleties in each specific case. First of all, we will give you a general description of the parameters that are necessary to ensure that your mobile gadget can connect to the Internet without problems.

The main parameter is the access point (apn) "Tele2" - in the corresponding field the value " internet.tele2.ru " should be set. Next is the type of connection (for some models may be typed in another name) - GPRS. All other settings do not need to be filled at all. However, we will quote them here:

• The proxy server must have the status "off";
• Login and password do not need to be entered (ie fields must be left blank);
• The connection name can be set arbitrarily by the user.

Internet 4G

Many subscribers - SIM card owners of the telecom operator in question - are faced with the inability to use the 4G Internet, although there is information on the official "Tele2" portal that such an opportunity exists. What can be the problem? How should the access point "Tele2" be set up? It turns out that the whole point is that to get a super-fast Internet, which is 4G by the operators' assurances, settings alone are not enough. It is necessary that the subscriber's device has support for LTE-1800 (Band 3) - you can check the availability of this parameter by reviewing the gadget user's manual or checking it on the manufacturer's website. Another condition that must be met is the receipt of a special SIM card, which makes it possible to interact with the 4G network. You can get it at the operator's office, which is covered in the current article. And you can do it for free.

Get automatic settings

For owners of cellular phones, which have difficulty with setting up the Internet, an automatic service "Tele2" has been developed, when you contact it you can get a message to your phone with the necessary parameters. To send the request, dial 679. Then, after the notification on the receipt of a new message appears on the screen, you should go to it and execute the command "Save" ("Apply", other variations are possible). After the operation is successful, the device should be restarted and check whether the access point "Tele2" was automatically filled.

Making Manual Settings

If the device can not be automatically configured - it is recommended to try this procedure several times, that is, you should perform it manually. The access point "Tele2" on "Android" devices and devices with other operating systems is used the same. The only difference is to determine exactly where your device is located in the settings section. For example, for "Android": go to the basic settings of the device, then select the "Cellular" section, then the item - "Access points (APN)". In the opened section, create a new access point and add all the parameters that were specified earlier.

Why can not I go online?

If the access point "Tele2" was successfully registered in the phone or tablet, along with other parameters necessary for the Internet, but you still can not use this service, you should check:

• Whether the mobile data is included (it is not enough just to configure the Internet, but it is also necessary to allow its use in the settings of the device - see the user's manual for details);
• Specify the remaining traffic (if the unlimited Internet option is enabled);
• Check the account status - even if the unlimited Internet option is enabled, it is necessary that the account has a positive balance;
• Make sure that the operating system is functioning in the normal mode - it is recommended to reboot the device to check operability.