Pendant chair-cocoon by your own hands: master class

Each of us strives to equip the interior of the room in such a way that there was not only cozy, but also comfortable. This is quite logical, because after hard working days you want to relax in a comfortable environment, so that nothing is disturbing. Such a favorite place can become a cocoon chair.

Previously, such designs were used only in suburban areas, today it has become fashionable to hang them in urban dwellings. And why not, if space allows?

Suspension chair-cocoon is not cheap, so it is not available to every ordinary resident. How to be? Everything is obvious: you can make a chair with your own hands, because it is not as difficult as it might seem at first glance.

Why do you need a pendant cocoon chair?

This chair is absolutely necessary for those who like to swing. Conveniently sitting on cushions, with a book in hand, slowly swaying, you can immerse yourself in a world of peace.

Thanks to the design in the chair you can retire, hide from others and calmly relax. This is especially important for those who value their personal space.

The cocoon chair will be an indispensable element for those who prefer the interior style of the Boho.

Types of pendant chairs

• A chair with a rigid frame.

The frame is usually made of rattan and vines, in some cases made of acrylic and plastic. In the role of seats, pillows and small mattresses are used.

• Armchair-hammock.

The design of this chair is similar to hammocks, the difference is only in size and mountings.

• The cocoon chair.

The peculiarity of the model is that the 3/4 armchair is closed. Basically, the walls are made of woven macrame.

• The chair is a drop.

The model is similar to a hanging house, especially suitable for installation in a nursery.

• Armchair on the counter.

The main feature in the fastening - due to a wide stable leg there is no need to fasten it to the ceiling, the design is put on the floor. The advantage of this chair is that it can be placed anywhere in the house.

Features of the creation of a hanging chair

Today there are more and more craftsmen who managed to make a hanging chair-cocoon with their own hands, the master class of manufacturing such a structure in detail tells about this process.

A distinctive feature of the chair is the similarity with spider cocoon. Such an element will decorate absolutely any interior and become a favorite vacation spot. In its structure it is an unfinished ball, braided with ropes.

The simplest creation technology is as follows:

• First of all, a skeleton is created. As a rule, 2-3 hoops of the same size are used for this purpose, which are connected to each other so that the ball turns out. To keep the ball better form, a few more semirings are installed inside.
• In order to sit comfortably in the armchair, it is necessary to put a seat there. It can be a pillow, a tablet, or you can simply weave it.
• In order to be able to sit in the ball and not fall down, it is necessary to tighten it with a net. Here, too, there are several options: you can buy a ready-made net, you can weave it yourself, or you can simply wrap the chair with a rope.
• The chair must always be hung to the ceiling. This will not be a problem if you initially provide hooks or brackets on the product, due to which you can attach the chair. After all, the main thing in a hanging chair is the ability to swing from side to side. In some cases, use a spring to be able to swing in addition up-down.

How to make a chair in the technique of macrame

Under the power of everyone to make a cocoon chair with their own hands, the master class of the process itself, most importantly, have at hand.

You will need:

• Two metal hoops with a diameter of 90 and 110 cm, section of 35 mm;
• Polyester cord with a diameter of 4.5-5 mm;
• Hook for binding No. 8-9;
• Slings - 12 m;
• 2 wooden rods 60-80 cm;
• Roulette, scissors.

The bottom of the chair can be crocheted or weave in the technique of macrame.

First of all, it is necessary to wrap the hoop with a cord, each tenth turn tying a knot.

Starting from the center, a circle of air loops and columns without a crochet is crocheted with a tight knit. After a 6-7 circle, you can go on to make a tightly knit seat, as well as a backboard, which can be made a mesh.

A knitted product in its finished form should not extend to the edges of the circle by 10 cm. Knitting will require about 120-160 m of cord.

To fix the seat on the hoop is on the side of tight knitting, at this time it is necessary to stretch the napkin evenly around the diameter of the hoop.

Manufacturing of a seat of a pendant chair

The seat in the macrame technique is much more economical, the following parts of the cord will be needed:

• 8 pieces of 6 m;
• 4 to 5;
• 4 to 4.5;
• 2 through 4.

Now we need to place the blanks on the hoop. 8 threads are attached in pairs in the center at a distance of 6 cm from each other. All the rest are fixed with the same distance on the sides.

To fix the cable, it is necessary to do a knot on each thread. We knit with the location of the knot at a distance of 6 cm, periodically stretch.

To the chair-cocoon was with a fringe, you need to lengthen each thread by one meter and do not cut off the end.

How to make the frame and the back of the chair

To make a cocoon chair hanging by one's own hands, it is necessary to take care of a solid frame. Wooden rods should be wrapped around the cord and inserted in the back, fix them up before knitting the back.

The hoops on the opposite side must be secured with a cord. The frame is knitted in the same way as the seat - a network of knots.

The next step is the location of the sling on the seat and the suspension of the chair.

We manufacture hanging chair

To make a frameless cocoon chair with your own hands, you will need to acquire the following materials:

• Two meters thick fabric;
• A wooden stick;
• With a drill;
• Carabiners for fastening ropes;
• Rope for mountaineering;
• Sewing accessories.

It's easy to make a chair-cocoon with your own hands, a master class will help you in this.

So, fold the fabric in half, counting from the upper corner of 18 cm, mark the triangle on the fabric to the bottom corner, cut off.

Bend the sides by 1.5 cm and sew the fabric.

Next, you need to make pockets for the rope, for this on the long side we bend the edges, about 4 cm, ironing and stitching.

We drill on a wooden stick two holes on both sides at the same distance, pass the rope into the near holes and fix the nodes. In the center of the cable there will be a carbine, so we mark this place with a knot.

In the ropes on both sides, the fabric is stretched, and the ends of the rope are inserted into the other holes of the stick and fixed with the help of the knot.

To fix the chair on the ceiling, it installs a hook and two carbines, the rope of the chair is placed on the bottom.

It remains to put a pillow on the seat and you can rest.

Pendant chair with cover

In order to make yourself a cocoon chair with a cover, you will need:

• 2 m thick fabric;
• Metal hoop with a diameter of 90 cm;
• Lightning 1 m;
• carbine;
• 10 m of the rope;
• Sewing tools.

Fold the fabric in half and cut the circle so that it was more than 25 cm in diameter.

We sew a zipper.

At the edges of the product, we cut out 4 holes, grind it.

We put the hoop in the cover, insert the rope into the holes and attach it to the carbine.

Choosing a cocoon chair is a matter of taste

The manufacturing options described above are not unique and unique. You can supplement existing technologies with your own ideas or even come up with something new. The main thing is to treat this process with imagination and desire.

Especially often you can find hanging chairs made of a rod, a wooden rod.

Instead of hoops for the frame, you can use anything that comes to your mind or falls under your arm. As a weaving, you can also choose absolutely any options, be it ordinary ropes, fabric or fishing net.

Buy a cocoon chair or do it yourself - you decide in any case. The variety of materials on the market makes it possible to create pendant chairs from everything that only the soul desires. Recently, more attention has been paid to products made from natural materials, they do not harm the environment and the owners and looks aesthetically pleasing. For example, an excellent option would be a cocoon chair made of rattan.

Previously, such structures were installed, as a rule, in country houses and in personal plots, but in modern times they have become frequent guests in modern apartment decorations.

Having made a hanging chair-cocoon with your own hands, you can create a master class after this event yourself. Then a lot of people who did not dare to make such a seemingly complex element of decor will follow your example.