Pump "Water meter" for the well: description and reviews

The "Vodomet" pump for the well is a multistage equipment with floating impellers washed by water. It is water cooling that is one of the important factors that prolongs the life of the device.

Description

The design has a built-in capacitor, which is necessary to supply water from the well. Its internal diameter can be equal to 100 millimeters and more. It is noteworthy that such a device is suitable for operation in well conditions that contain an increased amount of sand. These pumps can be used to control the filling level of the tank or the level of the pumped liquid from the automatic pressure control system. In the role of a source of water supply can come not only well, but also an open reservoir, as well as a well.

Feedback on choosing a model

If you decide to purchase a "Vodomet" pump for a well, you should be aware of the criteria for choosing this equipment. According to users, it is important to pay attention to the numerical designation, the first digit indicates the maximum water flow per minute at the outlet in the absence of resistance to the flow. Looking at the second number, you can understand what the maximum head in meters, developed by the equipment when working "at a dead end."

If you have a pump of the brand "Vodomet 60/52", then, as the buyers say, this indicates that with a free spout the equipment is capable of supplying 60 liters of water per minute. This volume is equivalent to 3,6 cubic meters per hour, whereas when cutting off the delivery the head will be 52 meters, that is, 5,2 atmospheres. This unit is almost not used in the limit mode, most often it is operated at the operating point.

The "Vodomet" pump for a well with a maximum flow rate of 115 liters per minute is used for wells and wells with high and medium flow rates. If there is a need to select equipment for water sources with high production rates, then a variant with a maximum consumption of 150 liters should be purchased.

General characteristics of submersible devices

Submersible pump "Water meter" for the well has a high coefficient of efficiency, it is ready to last a long time. This equipment has a powerful electric motor cooling system. In the design of the pump there is a cable that can be pulled through the top cover, which allows the equipment to be used in the wells even of the smallest diameter of the casing.

It is noteworthy that these submersible pumps can work continuously for a long time, this is made possible by the built-in water "shirt". It provides the passage of water between the stator of the engine and the body. The "water meter" is capable of delivering liquid from a small or large depth. Devices have good tightness and are equipped with a thermal protector, which is responsible for the temperature of the equipment.

Characteristics of the pump brand "Vodomet prof 60/32"

If you are interested in products of the brand "Vodomet", the pump for the well "Prof 60/32" can be purchased by you. It refers to a series with increased performance. Suitable equipment for water with a significant content of sand. It can be used only in those wells, the depth of which does not exceed 30 meters. The temperature of the liquid should not be more than 35 degrees.

Consumers who decided to purchase this equipment should be interested in the power of the submersible pump, which is 470 watts. For one minute it will be able to produce 60 liters of liquid, the maximum amount of pumped out sand will be equal to 2 kilograms per one cubic meter of water. The products of the brand "Vodomet" have long been popular with Russian consumers, the pump for the Prof-60/32 well is a confirmation. Its body is made of high quality stainless steel, which provides a long life of the device. However, in the process of using the unit, you must remember that the pressure should not be above 3.2 bar.

Characteristics of the "Prof 55/50" pump

Visiting the store, you will be able to find a large assortment of goods that are manufactured under the brand name "Vodomet". The pump for well 55/50 can be considered as an example. The depth of his immersion is 30 meters, the power is 680 watts. Install the equipment vertically. As practice shows, the engine runs noiselessly, and it is capable of deflating 3,3 cubic meters per hour. Do not use this equipment for dirty water, as in this case it can fail. The size of the particles to be filtered can be a maximum of 1.5 millimeters, and the length of the power cord is equivalent to 20 meters. This information will help you with the installation of the device.

Characteristics of the pump of the brand "Dzielex Vodomet 115/115"

If you are interested in the brand "Vodomet", you can purchase a pump for the 115/115 well for 14300 rubles. This submersible equipment is designed for pumping water out of the well, the liquid can be slightly contaminated. The maximum depth, as in the above-described case, is 30 meters. The capacity is 6900 liters per hour. The advantage is that the device can be used for small wells. With its help, you will be able to irrigate your garden or garden, among other things, it is suitable for water supply in homes. The weight of the unit is 22.6 kilograms, which facilitates its installation.

This pump "Dzhileks" for the well, the photo of which is presented in the article, has a rather wide scope of use. It can be used in tanks, as well as in open reservoirs. The equipment is perfectly adapted to difficult Russian conditions. To create it, the manufacturer uses durable and wear-resistant materials. For example, for supporting bearings , granite and ceramics are selected. As for such an important element as impellers, a wear-resistant polymer is used for them.

Customer feedback on the model 115/115

The products of the brand "Vodomet" found wide distribution among the Russian consumers. The pump for the well, which you can read about in the article, is a patented product, and the quality characteristics are constantly being improved. To provide protection against engine overheating, the technology of water washing is used. A fluid enters the annular gap, which is located between the shell of the stator and the body.

According to users, they like the environmentally friendly materials in the basis of the design, among other things, it is important that this pump is not afraid of abrasive sand. This model has a strainer that cleans water during operation. Users emphasize that the 115/115 water jet has increased wear resistance. In appearance, this equipment is very attractive, has a modern design, which can be called an additional advantage.

Instructions for use

After reviewing the reviews, you too can pay attention to the products of the company "Vodomet". A pump for a well, the characteristics of which are presented in the article, should be used taking into account some features. For example, when pumping water, the temperature range is limited, you can use the equipment when the temperature of the thermometer is between 1 and 35 degrees. The device can be turned on and off 20 times per hour. According to experienced users, it is very important to withstand the maximum sand content in the water. For the model described, this parameter is 300 grams per cubic meter.

Why else should I buy pumps "Vodomet"

The described devices have a lower cost compared to foreign analogs, many nodes and elements are the company's own development. But high-tech parts are also used in production, which are supplied from other countries. Low cost (13-20 thousand rubles.) And excellent quality - these are the two factors that force consumers to purchase products of the brand "Vodomet".

A pump for a well, whose construction is reliable and durable, can be used for supplying drinking water, pumping various types of liquids, arranging sewage systems and irrigation of sown areas. A wide range of applications attract buyers who are interested in acquiring quality equipment for pumping liquid from a well.