Postcard "Merry Christmas!" With your own hands: do it yourself

A wonderful tradition is to give greeting cards not only for the New Year, but also for Christmas. We offer you several master classes, how to make a card "Merry Christmas" with your own hands.

Embroidered card

Master class on creating a postcard on the theme "Christmas" with your own hands using a needle and thread:

1. Make a blank card, that is fold a sheet of cardboard in half.
2. Sketch on the front side with light movements of a simple pencil herringbone.
3. Make holes with holes in the main points on the Christmas tree (where the line is bent). The holes must be paired in each place.
4. Take a needle and thread a green thread (woolen or mulina) into it.
5. Embroider a herringbone on the drawn outline, passing a needle through holes.
6. Try to tighten the thread more firmly, so that it fits snugly against the cardboard.
7. Draw Christmas balls and sign "Merry Christmas!".

Card with paillettes

The procedure for creating a postcard:

1. Make a cardboard blank.
2. Make a beautiful inscription "Merry Christmas!", For this purpose you can use gel pens or markers of unusual colors (for example, silvery).
3. Take a few sequins of different shapes and colors: round red and rectangular green.
4. From green make leaves. To do this, make their edges zigzag.
5. Green leaves-sequins can be bought and immediately ready.
6. Sew the red and green fragments using a string of matching colors to make the flowers and leaves (see the picture above).

Postcard "Merry Christmas" with your hands from the sequins is ready!

Postcard in the technique of scrapbooking

Instructions for creating a simple postcard on the theme "Christmas" with their own hands in the technique of scrapbooking:

1. Cut a rectangular sheet of decorative cardboard and fold it vertically with the envelope. To do this, just bend it two times.
2. Cut a square out of scrapbooking paper , which is a bit smaller in size than the main card compartment.
3. Make the curly edges of the cut out box. This is easy to do with a special scissors with denticles.
4. Glue a square on the pencil sticker inside the postcard and sign it.
5. Cut off a piece of decorative tape. It is better that its design be thematic. The tape should fully encircle the postcard in a folded form, and its length should be enough for the bow.
6. Align it and put it on the middle of the card with the back side.
7. Using a glue gun, glue the cloth to the cardboard.
8. Tie the remainder of the ribbon in front of the postcard in a beautiful bow.

Postcard in the form of a Christmas socks

Master class, how to make a figured card:

1. Cut out a large sock from red cardboard.
2. From white cardboard, cut a piece of heel and a socks, a gate, and a large rectangle.
3. Stick a rectangle in the center of the toe, and all the other parts - in the appropriate places.
4. Cut six red circles and six green leaves with zigzag edges.
5. Stick the circles in opposite corners of the rectangle in the form of a flower - a kind of symbol of Christmas.
6. On the rectangle, write "Merry Christmas!".
7. Take glue glue and make diagonal lines on the white sections of the sock.

The picture postcard "Merry Christmas", made with your own hands ready! It will look spectacular and original.

Postcards for Christmas with their own hands

Bulk postcards are not as difficult to do as it seems. To create it, you just need a little more material than usual.

A detailed description of how the "Merry Christmas" card is made with your own hands:

1. Cut out several identical elements from cardboard or paper. If you want to make a card with a Christmas wreath, then cut out a lot of blanks of long leaves of several shades of green (from light to dark). If you want to make a card with a Christmas flower, cut out the flowers from the three long petals of different shades of red and different in size.
2. Take a sheet of cardboard bent in half and begin to collect the artifact on its front side. To make a wreath, you need to stick the leaves in a circle, layering them on top of each other. And to make a flower, glue each other blanks with petals in decreasing order - first a little more, then - smaller. Each new layer rotates about forty-five degrees relative to the previous one. Under the very first row, glue the green leaves.
3. Make finishing touches. In the middle of a flower or leaves, paste sequins or special droplets that are convex on one side, and smooth on the other.

That's how you can make voluminous postcards "Merry Christmas" with your own hands. The photos above illustrate the process.

A wonderful Christmas card with a three-dimensional herringbone

Master class with a description of how to make a 3-D postcard with your own hands "Christmas":

1. To create such a postcard, you will need to take a blank card, wooden flat sticks (as for ice cream), dry sequins (shimmer), double-sided scotch, glue gun, beads of different sizes in the same shade as sequins and a decorative figure for the top.
2. Lay out the sticks in front of you and shorten each one so that you end up with a fir-tree.
3. Cover the wooden sticks with a double-sided tape on both sides.
4. Remove the protective paper from the tape on one side and sprinkle the shimmer on top.
5. Shake off excess tinsel with a brush.
6. Remove the protective layer from the tape on the other side of the rods.
7. Glue one long stick vertically in the center of the workpiece for the postcard.
8. Step back a little from below and glue the longest detail from the top to the previous one.
9. Stick on the sticks to make a Christmas tree. Between the rows, make a small indent.
10. Using a glue gun, fix the beads and the top on the twigs of the Christmas tree.
11. Sign the card.

Postcard with decor of thread

Such a congratulatory card is very simple, but it looks beautiful and unusual.

Description of how to make a postcard "Merry Christmas" with your own hands:

1. On the cardboard blank, draw sticks of different length from above. This can be done with colored pencils, a marker or gel pens. The color is better to choose black. So the decor will look very stylish.
2. Take a colored twine or a thick decorative thread. If there is neither one nor the other, then the material can be made independently. Take the usual thick thread (preferably woolen) and weave tight coil from them. Choose a string of saturated shades.
3. Draw a spiral under one of the lines drawn earlier. The size of the ball depends on its size.
4. Immediately glue the thread in a spiral. Each new row should fit tightly to each other and cardboard.
5. Similarly, make the remaining balls.
6. Make the inscription "Merry Christmas!".

The postcard is ready!