Plastic outflows for windows: why they should be installed, and how to do it?

Plastic outflow for windows is an obligatory accessory, which is designed to protect the facade of the structure from the influence of moisture, snow and other negative environmental factors. If they are not installed, then the walls can lose their decorativeness. The presented products possess other qualities that make them mandatory for use.

Advantages of the presented accessories

Plastic outflows for windows have such advantages:

• Resistance to negative atmospheric influences (rain, frost, snow, ice);
• Increased protection against fire;
• Resistance to rust and corrosion;
• Convenient construction and easy installation (it can be made by hand);
• Strength and reliability;
• The ability to select the color of the element;
• Ease of maintenance.

Plastic outflows for windows also have a low cost, so they are very popular. In addition, unlike metal products, they are almost noiseless.

What tools are needed for the installation of tin?

You can make the installation of the presented elements yourself. This will take quite a bit of time and tools. For example, you should prepare such items as:

• Roulette and marker;
• Jigsaw or Bulgarian (in case you have to saw off part of the element);
• Plastic windows for windows;
• level;
• Plugs;
• drill;
• Foam and sealant (silicone);
• Sharp knife.

Other materials may be needed only if the window opening is not even.

Features of fastening elements

The installation of tiny plastic windows has some nuances. For example, they should fit snugly to the base and be cut exactly to its size. Otherwise, you can not protect the walls from moisture, and the sound of drops on the plastic will be clearly heard. All work should be done in sunny warm weather.

During installation, one should also take into account the fact that the ebb should stand at a slight angle (10 degrees). Under the element it is better to additionally put a layer of waterproofing material. In order to be more securely attached to the base, use a combination of sealant and mounting foam.

So, before starting any work prepare the ground. To do this, remove all debris and remnants of mounting foam from the window. Using additional slats, ensure the desired slope of the element. Now put the tide on the base and check its evenness with the help of the building level. If everything is in order, you can start fixing it. Note that the bend of the product must go into the wall, so it should be mounted before the window slopes are installed .

After the plastic outflows for windows, the price of which does not exceed 5-10 dollars apiece, will be attached, seal all the gaps. This is to ensure that moisture does not fall under the element. For greater reliability, the ebb-tide can be reinforced with self-tapping screws.

Basically, these are all the tips for installing the presented elements. The process is not too complicated, and you can do it yourself. Good luck!