HobbyNeedlework

Pattern of a backpack from jeans by own hands. Sew a backpack of old jeans for a boy

Old, worn, but such favorite jeans ... In every closet there is such a "skeleton". Discarding your favorite pants is simply so impossible, but they were worn for the last time about 10 years ago. There is a great alternative - jeans can give a second life. The pattern of a backpack of jeans with your own hands does not require accuracy up to a millimeter. Most masters do everything by sight, and the result exceeds expectations! The most important thing is to cut and stitch the parts exactly and neatly.

What are we sewing? Which jeans suit

The answer to the question is simple - any! Old, worn, washed, patched, light and dark - any jeans will fit! All problem areas can be easily bypassed and used by other parts of the fabric, and small spots, holes and scrapes are easy to decorate and beat with appliqué, buttons, beads and other elements.

Before you begin to work, you need to think about the size of the bag. The design of a backpack of jeans by one's own hands - though not an obligatory attribute, but it is better to estimate on the back of the person who will wear it, the approximate size of the back part and start from this data. The fact is that fabrics just might not be enough, but this is not an excuse to stop and refuse further creativity! After all, the missing fabric is easy to replace the other. In addition, you can use a different color of jeans, any dense fabric or skin, soft suede, corduroy.

If the plans are to use different colors of jeans, it is better to make a single patchwork cut, combining individual pieces into a canvas of the right size. Then you can sew a great children's backpack of jeans with your own hands. In this case, the patterns must be prepared in advance. It will be enough to design a detail of the rear and front walls, straps, as well as the valve. All other elements - pockets, pads - need to be done at the discretion of the master and the chosen model of the backpack.

What are the backpacks of denim

Much depends on what kind of a backpack of jeans will be made by oneself. Patterns for each individual version need different. The backpack can be in the form of a bag with a pulling top. If the seamstress can make a neat upper cut and beautiful eyelets, then it does not even need to be covered with a valve. It is enough to pull the cord through the loops, loops or eyelets, which will be fixed by the clamp.

When you need a more spacious backpack, then you need to make the bottom. It can be oval or rectangular in shape. To keep the backpack in shape, you need to give the bottom rigidity. For this purpose, a sealant (doublerine, foam rubber or cardboard) is inserted between the jeans and the lining. The pattern of a backpack of jeans with your own hands with a bottom requires a detailed construction and must take into account all the measurements, so that the details will match when sewing. In this case, schematic drawings of the rear and front parts, side panels, valve and pockets should be drawn up. In this case, it is desirable to sew lining fabric. Her details are also cut out, but experts advise to reduce all sizes by 1-1.5 cm so that the lining does not frown inside the sewn backpack.

The most simple and affordable way to sew a backpack of jeans with your own hands (patterns then do not really need it) is to make it from the leg. This backpack rather resembles a miniature handbag, but it is very cute and comfortable, and also will please the children.

If the model is liked, and the size is needed more - then you can open both legs on the inner seam and stitch them together in one wide "pipe". And already from such preparation to make here such lovely backpack it will not be possible.

What do you need

When the pattern of a backpack of jeans is ready with your own hands, you need to prepare other necessary materials and tools for work. What is needed?

  • Jeans or denim;
  • Lining fabric (you can buy or use what is on hand - the main thing is to have enough material);
  • Sewing thread (it is desirable to choose similar in tone with those with which jeans were stitched in production);
  • Decor (rivets, buttons, appliqués, patches);
  • Thick cord, wide braid or sewn in advance straps (for future gloves);
  • Accessories (zipper, carabiners, locks, buttons, buttons, straps and fasteners, depending on the model).

These are all the materials that are needed to sew a backpack of old jeans with your own hands. Patterns can be made independently, and tools are needed special, sewing.

Jeans - pretty dense fabric, so the scissors need sharp, it will greatly facilitate the work. For the same reason, sewing a backpack by hand is unlikely to work. It is necessary to use a sewing machine, the needle is suitable for jeans or slightly thicker than the standard (No. 100, 120).

How to make a pattern for a backpack

The first thing you need before you start making a backpack of jeans with your own hands - patterns. They can be the simplest, without accurate calculations and measurements, but their availability will greatly facilitate the process of work.

According to the chosen model, it is necessary to depict on paper all the details of the future backpack in accordance with the desired dimensions. The main and binding will be the front and back of the bag, the valve, straps (if not using a cord or braid). If desired, you can design suitable for size front and side pockets.

You need to know such dimensions of the future backpack as the height of the backrest and its width at different points (bottom, middle, top). The front part of the pattern is a mirror copy of the back. If you make a backpack volume, with the bottom, you need to draw wedge-shaped side details, the height equal to the height of the main parts, but having the form of a wedge expanding to the bottom. The pattern of the bottom is constructed so that the long side is equal to the width of the back and front part, and the short one approaches the wedge in size.

Valves, pockets, straps are designed depending on the size and model of the backpack. When the pattern is ready, it should be attached to the fabric and transferred to it, taking into account the allowances for seams.

How to make a bag-backpack for half an hour

It is much easier to sew a bag-backpack of jeans with your own hands. The pattern in this case is almost unnecessary. This backpack is sewn from the pant leg, and you need to cut out only a few details - handles, straps, and a valve.

For sewing a bag you only need one line - the bottom seam. To add volume to the handbag, you need to make two small seams near the side lines, 3-4 cm long, this will help to form the bottom. The upper cut is not necessary to process, because it is already sewn. The final stage will be fastening straps and straps.

How to decorate

To give the product a final appearance, you need to decorate your backpack of jeans with your own hands. Patterns for boys suggest clearer and more rigorous lines. Dilute this severity can be by using a different decor. These can be special thermo-applications. They are attached to the fabric with the help of an iron, they are kept very reliably, besides the variety of these labels allows you to choose an ornament for every taste.

Leather elements will give the backpack a more refined and elegant appearance. But the use of metal elements will help create a unique stylish accessory. It can be rivets, thorns, buttons and chains.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.unansea.com. Theme powered by WordPress.