Nail Production Machine - Features and General Description

Today the most popular fasteners are nails, which are in great demand among people. They are used both in everyday situations and during construction. In this regard, we can say that they are able to bring producers a very good income. The manufacture of nails can be either large-scale or not quite so. It all depends on what the manufacturer is going to contribute to the project. As a raw material for production, ordinary wire is used. The main aspect for a good start to business is the availability of people who will supply this wire at a not too high cost.

In order to make your own production excellent, you will need to rent or purchase a room and buy a machine for making nails. Suppliers usually sell raw materials in the form of a reel, which weighs about one ton. As a raw material, wire from low-carbon steel is mainly used. If there is a machine, material and room, then the production of nails does not require large physical costs. For production, it is necessary to have a wire-nailing machine that has the following characteristics:

1. The diameter of one rod reaches about six millimeters.

2. The length of the nail produced can vary from twelve to 320 millimeters.

3. In one minute the machine can produce from one hundred to six hundred pieces.

4. The power of the machine is able to reach up to 20 kW.

5. The weight of the machine varies from one to two tons.

The machine for the production of nails works as follows: the wire is fed to the input of the machine, after which the cutting takes place at the required place at the desired angle. On the line of the cut, there will be a point later. After impact on the other end of the workpiece, a hat appears. In principle, the manufacturing process is not very complicated. The cost of the machine starts from one hundred thousand rubles. The room for the production of nails can also be equipped with a special device for unwinding the wire from the reel.

In the event that it is planned to start production that is not too large, then for a good functioning it will not be necessary to hire a large number of people, only two employees will be enough. In addition, additional education from workers is not required, since the machine for the production of nails operates in semi-automatic mode.

The cost of production will be formed from the initial price for purchased raw materials. Usually, one wire spool is estimated at an average of 23 thousand rubles. The diameter of the wire and the mass of the bobbin at the same time is one millimeter and, correspondingly, seven hundred kilograms. For electricity it will be necessary to pay about three thousand rubles a month. On the salary of an employee with a small production will take about twenty thousand rubles. About rent of a premise in a month will leave about nine thousand rubles. If we take into account the fact that the cost of one nail is about ten rubles, then a month the nail production machine will produce about three and a half tons of material. In order for the business idea to pay off at least one year, it will be necessary to produce about four tons of products per month.