Linocrom: specifications, price, reviews

The Linocut refers to one of the varieties of roofing materials. This modern product replaced the old sample - roofing felt. A linkage refers to a roll-up soft roof, guided along the surface of flat roofs. With a small slope, the slope is traditionally equipped with this kind of coating.

Application in construction

The material is used in several types of construction work. Use when creating a new roof is characterized by professional styling using strict technology. Repair of the old coating is quite easy. It is not necessary to disassemble the half-roofs in order to update the laying material. The direction of the carpet of the surface is made by an open flame. The specificity of the process depends on the particularity of the roof and the type of work.

When waterproofing the building foundation and building slabs, a linden is often used, the technical characteristics of which are suitable for this purpose by all criteria.

The basis of the structure

The technology of roofing construction materials is being improved, and therefore in this variety it is possible to see the components, due to which the distinctive properties are acquired.

The coating composition is characterized by a non-rotting structure. The basis is a fiberglass or polyester material. The first include fiberglass and fiberglass.

• Glass fiber is produced by pressing fine fibers. Has a smooth smooth shape, which ensures the subsequent application of layers of linocrom. Apart from other components, it is resistant to moisture, chemical and temperature effects. A positive moment for the roof surface is high air and vapor transmission, which prevents the risk of fungus and mold in the roof structure.
• Fiberglass is a material created by the interlacing of glass filaments. Strength is higher than that of fiberglass. As a basis for a limocrom, wireframe and smooth varieties are used. In the case of using smooth fiberglass, the quality of the roof will be much worse. Deformation during transportation, flaking bitumen will only damage the roof covering. Such a roof refers to cheap products and assumes lower costs for a full cycle of laying and exploitation of the roof. Frame has a transverse structure of the weave, and so the soft roof does not deteriorate upon delivery and retains the appearance and function.

The second kind of base is polyester. It is recommended to use it under stringent conditions, where the most dense roof covering is required.

• Polyester has high strength. Layered bitumen firmly adheres to its surface. The material is elastic, able to lengthen by almost a third, allowing the liner to be tightly laid. Technical characteristics of polyester testify to the high-quality functionality of a soft roof with this structural basis.

Surface layers of the linocrom

The next component of the linocrom is the bitumen binder applied to the substrate on both sides. It consists of the above-mentioned organic bitumen and filler. The peculiarity of bituminous material is its aging over a certain period of time.

• Bitumen is an astringent agent obtained as a result of the separation of minerals (oil) into organic and mineral parts and processing. The linocrome uses modified bitumen. Its service life is extended by 3-5 years. During this time, he does not frown or crumble. It has low heat and electrical conductivity, allowing to keep heat and not to electrify the surface of the roof.

A three-layered base of the central layer and bitumen is covered with thin protective layers.

• The first kind of protective coating is a polymer film. It gives the linocroma additional elasticity and allows you to proportionally lay the roof on the roof surface.
• Coarse and fine grained powders provide a special function to increase the area of contact with air and moisture from the outside and protect the linocle itself from the ultraviolet and aggressive environment. The technical characteristics of this protection can prevent early aging of the roofing material.

Properties and advantages over other types of roofing

Why is such a common, seemingly material is functional in use and has advantages over other coatings? This becomes clear in the process of how you stack and exploit the lynx. Technical characteristics describe properties that represent the practicality of this coating. This is achieved by a rational and useful ratio in the composition of the linocrom. Here are the individual properties.

• Absolute water resistance up to 3 days will help the roof not to get wet in rainy time and spring melting.
• Heat resistance up to 90 ^о С relieves the risks of melting and ignition from sunlight and hot air.
• Elasticity and stretching help to densely lay the roof on the roof surface, avoiding damage to the shape and properties.
• Resistance to high loads is useful in construction works of stringent requirements.
• Service life is up to 10-11 years. Unlike a roofing material, a linocenter requires repair twice as often. This is due to the new technologies of the above composition and technique of application.

Types of the Linocrom

The Linocom provides 6 varieties:

• Linocrom HPP. The technical characteristics of this type are reduced to a small strength and a small force to break. This is due to the presence of a glass-fiber in the basis of the material.
• EPP reaches a density of 4 kg / m2 and heat resistance up to 80 ^° C. The basis is polyester, protected by a polymer coating.
• It differs from the previous central fiber in the quality of fiberglass linecam TPP, the technical characteristics of which are characterized by high strength and high tensile strength.
• EKP. As protection - coarse-grained slate and granulate. Polyester material is excellent for the upper layers of the roof.
• The only difference between the HCP is the fiberglass backbone.
• Linocom TCH. Technical characteristics include a high density - more than 5 kg / m2. Fiberglass cloth.

Price and reviews

Reviews of this building material say that it is much more practical than roofing felt and many other soft roofs. Buyers talk about the excellent laying technology, which is simple with a correct and safe process. They tell us about the qualitative fixing of the powder and the long service life. Among such buyers as usual owners of houses, and professional building brigades.

The most popular and popular on the market is the company "Tekhnonikol", which produces a lynx. Technical characteristics, price and quality are perfectly combined with many other well-known suppliers. The average price for a grain of HPP varies from 50 to 100 rubles per square meter, the price of a coin for small sellers differs little from different sellers - about 70 rubles per square meter, the other species are valued equally - within 70-85 rubles per square meter.

The Linocrom is one of the safest soft roofing coatings that pleases its functionality for a long time.